Top Voltage Requirements - BuyWiseBest.com

Erbium (Er) 24.26mm Metal Disc 99.9% Pure for Collection or Experiments

250mm x 46mm (internal diameter) solenoid. Wound with insulated copper wire.
Operating voltage 12V A.C. or D.C. at 6A. Magnetizing by A.C. or D.C. Demagnetizing by A.C. only.
Additional requirements: AC/DC Power Supply (12V, 6A), Magnetic Needle, Cylindrical Bar Magnet, Analogue Multimeter.

Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction.
Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise..
Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer)..
Uni-directional. Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ). Output impedance: 200Ohm±30%(at 1kHz). Standard operating voltage: 3V..
Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB..

1000Va/ 600W battery backup Uninterruptible power supply (ups).
8 total outlets: 4 outlets provide ups battery power backup and surge protection.
Automatic voltage Regulation (AVR) maintains safe voltage conditions without using backup battery power.
Apfc compatibility- ensures electronics that have active PFC power requirements will not unexpectedly shutdown when switching from utility power to....

APPLICATIONS: Ideal for small commercial indoor applications requiring match existing equipment for mounting heights up to 10 ft.
INSTALLATION: Wall mount only (not suitable for ceiling mount).
RATINGS: UL damp location listed standard at 50-104 degrees F, meets or exceeds all applicable requirements for Life Safety Code and state specific requirements.
VOLTAGE: Functions between 120 and 277 volts with input wattage of 2 watts.

Product content: you will receive 2 pieces voltage gauge meters, enough quantity to satisfy your daily use requirements, bring convenience to your daily life.
Multiple purposes: the LED display voltage meter is applicable for most vehicles, like cars, ships, RV, substation automation, distribution automation, test equipment and so on, practical enough to satisfy your a plenty of needs.
DC 12V car digital voltmeter gauge: two-wire voltage detection.
Mini size with 3-digit LED digital display.
Simple connection, easy to use and waterproof.
Extreme working conditions: working temperature: -10 - +70 ℃.
Working humidity: 10 - 80% (no condensation).
Do not exceed the specified value of this product during the measurement process to avoid damage to the product.
Display voltage: 5-28.6V, real-time control of battery voltage status, bringing convenience to you.

APPLICATIONS: Ideal for larger commerical indoor applications requiring attractive LED unit equipment for mounting heights up to 12 ft.
INSTALLATION: Wall mount and ceiling mount standard.
RATINGS: UL damp location listed standard at 50-104 degrees F, meets or exceeds all applicable requirements for Life Safety Code and state specific requirements.
VOLTAGE: Functions between 120 or 277 volts with input wattage of 2.4 watts.

listed by 3rd party safety labs CSA, ACMA, and has been assessed to meet high safety, health, and environmental protection requirements within the European Economic Area (EEA).
Verify presence of AC and DC voltage in electrical sockets, extension cords, batteries and other electrical circuits.
Measurements: Voltage up to 600V AC/DC, AC/DC Current and Resistance.
Install, troubleshoot or repair light fixtures, fans or appliances.
Micro amps function to troubleshoot flame sensors used in gas appliances.
Audible continuity Diode Test Data hold Auto power off Low battery warning.

High Power Capacity: Includes Tenavolts AA High-Capacity Rechargeable Batteries pre-charged, each with 2775 mWh. Great use for high-power demand device, including insulin pump, toys, remote controls, and portable audio players.
1.8 Hours to Fully Charged: Get a full charge in 1.8 hours. Much faster than traditional Ni-MH rechargeable batteries which need 3 hours to fully charged.
Constant voltage and Best Performance: Tenavolts rechargeable lithium batteries are far superior in voltage retention. Designed with innovative technology, Tenavolts outputs 1.5 voltage from 100% to 0% electric capacity, providing constant voltage and best performance in heavy load discharge.
Long-lasting batteries, Less Waste: Tenavolts can be recharged in 1,000 cycles. Since discarded batteries are terrible for the environment, from environment perspective, rechargeable batteries are more economical and better than regular batteries for the environment.
Unique recharge design: Tenavolts AA batteries can only be recharged with the authorized unique Tenavolts battery charger. The Tenavolts battery charger satisfies the special recharging requirements.

Output Voltage :0~5V. Higher the concentration, higher the voltage..
Quick response recovery feature,Long service life and reliable stability..
Sensitivity can be adjusted to suit the requirements of the application by rotating the potentiometer..
Suitable for household or factory gas leakage monitoring device, suitable for liquefied gas, butane, propane, methane, alcohol, hydrogen, smoke and....
Size: 32x22x27mm/1.26x0.87x1.06Inches(LxWxH).Package: 1PC..

This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
【Specification:】 Product Name : Synchronous Motor； Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction :....
【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.

MODERN DESIGN: 5-light chandelier in a Bolivian Bronze finish, with Alabaster Glass Shade..
BULB REQUIREMENTS: It takes five 100-watt medium base frosted light bulbs (not included)..
INCLUDED: This chandelier comes with 6 feet of chain and 7 feet of wire..
SHADE MATERIAL: GlassDIMENSIONS: 24"w x 21.5"h.

APPLICATIONS: Ideal for larger commerical indoor applications requiring attractive LED unit equipment for mounting heights up to 24 ft.
INSTALLATION: Wall and ceiling mount with tool-less removal of front cover from back-plate for ease of installation and maintenance.
RATINGS: UL damp location listed standard at 50-104 degrees F, meets or exceeds all applicable requirements for Life Safety Code and state specific requirements.
VOLTAGE: Functions between 120 and 277 volts with input wattage of 3.15 watts.