Top Voltage Tester For Dc Voltage

Greenlee - Electrical Kit Gfci Elec Test Instruments TK-30AGFI 10 x 8 x 3

  • Kit includes multimeter DM-25, non contact voltage detector, receptacle tester GT-10GFI and carrying case.
  • Multimeter measures AC/DC voltage up to 600V.
  • Non contact voltage detector safely detects AC voltage.
  • Receptacle tester ensures sockets are wired correctly with additional ground fault circuit Interrupter (GFCI) testing capability.
Check Stock

Autel PowerScan PS100 Power Circuit Probe Kit with 40ft Cable, 12V 24V Automotive Circuit Tester, Car Electrical Diagnostic Tool, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test

  • 【2023 ALL-IN-ONE POWER CIRCUIT TESTER KIT---ACCURATELY】Autel PowerScan PS100 is most accurate power circuit probe tester yet, with 160x128 TFT display test all 6-30 volt vehicle electrical systems. Autel PS100 supports voltage&polarity test, continuity test, signal circuit test, components activate, check bad grounding, locate short circuits, circuit breaker protection, etc. Intuitive interface with ergonomic design makes PS100 be best gift for all novice drivers or pro circuit repairers..
  • 【FOUR WORKING MODE---INTUITIVE&EASY】Four working modes make circuit detection more simple:DC Voltage, AC Voltage, Resistance, Tone On/ Off. DC Voltage mode can read DC voltage with 0.1V resolution.
  • AC Voltage can read Max & Min voltage, frequency and duty cycle quickly.
  • Resistance mode can read resistance between tip and auxiliary ground wire. Unique Tone On/Off Design is really useful when working in bright areas, it can judge the circuit voltage according to the volume of the sound..
  • 【COMPONENT ACTIVATION】The component activation feature is specially designed to troubleshoot on/ off-board electrical equipment. By activating the signal generated by th....
Check Stock

Amprobe AT-8020 Advanced Industrial Wire Tracer Kit

  • 【FUNCTION UPGRADE】 KZYEE KM50 Circuit Tester Kit is an upgraded version of KM10, which performs each type of testing modes, like DC Voltage, AC Voltage, Signal Frequency, Duty Cycle, Fuel Injection, Resistance, and Diode.
  • 【QUICK DIAGNOSIS】Quicker troubleshoot and diagnose circuit conditions by switching waveform display from the digital display for AC Voltage, Frequency, Duty Cycle, and Fuel Inject testings by long-pressing the mode button for 3 seconds.
  • 【WIDELY APPLICATION】Works on 12V 100-2000CCA lead acid batteries , including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. Also, it is suitable for cars, motorcycles, trucks, ATVs, SUVs, boats, yachts, mowers, and even golf carts and lawn tractors batteries.
  • 【CRANKING & CHARGING SYSTEM TEST】Presents you with the test results (actual cranking voltage & cranking time) of the starter system in milliseconds to indicate if the cranking system is working as expected. Also, the battery load tester conducts a throughout check on the 12V charging system to make sure a normal generator output，perfectly working rectifier diode and under controlled charging current.
  • 【SAFE PROTECTION DESIGN】The battery tester doesn’t emit light, heat or spark, and won’t discharge the battery. It ....
Check Stock

ANCEL BA101 12V 100-2000 CCA 220AH Automotive Battery Load Tester with ANCEL PB100 Circuit Probe Vehicle Diagnostic Volt Meter 12V/24V AC/DC Resistance Detector

  • Includes: 1x BA101 Battery Tester, 1x PB100 Circuit Tester.
  • Small compact design, fast scan and direct test results display are some of BA101’s benefits. It’s a simple and easy yet quick and accurate tool for analyzing the health of a 12V battery. It tells you everything about battery’s voltage, charge, cranking power, and how much life is left of it (level of Ohm resistance)..
  • It checks the alternator's charging and starter's cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status..
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
Check Stock

Greenlee - Electrical Kit-Basic (Tk-30A), Elec Test Instruments (TK-30A), 10 x 8 x 3'

  • Kit includes multimeter DM-25, non contact voltage detector GT-11, receptacle tester GT-10 and carrying case.
  • Multimeter measures AC/DC voltage up to 600V.
  • Non contact voltage detector safely detects AC voltage.
  • Receptacle tester ensures sockets are wired correctly.
Check Stock

CMTOOL Power Circuit Probe Kit 9-30V Automotive Circuit Tester, Test Light Automotive Relay Tester Kit, Car Electrical Tester Digital Voltage Tester Continuity Tester Tool with 6m/20ft Extension Cable

  • ...pplications】Continuity Test, Signal Circuit Test, Activate Components in You Hand/Vehicle/W/Ground, Check for Bad Ground Contacts, Follow&Locate Short Circuits, Trailer Lights and Connection Test..
  • 2.【Power Circuit Probe Tester with Fast Intelligent Test】Automotive circuit tester can automatically identify the voltage value, resistance value, and positive and negative polarity of the detected circuit (red light is positive, green light is negative)..
  • 3.【Automotive Circuit Tester with Digital Multimeter Mode】Automotive circuit tester contains the common parameters of multimeters, and can quickly test the DC voltage, resistance, and diode in the circuit system, current, and frequency, bringing a lot of convenience to users..
  • 4.【Electrical Tester with Oscilloscope Function】Circuit probe tester with 6M extension test lead, can display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc. Users also can observe the test results more directly by adjusting the displayed interval..
  • 5.【Power Circuit Tester Kit with Component Activation Function】There is 4 activation modes for the component activation function of the automotive probe tester, which can generate "activation" signals for components, such as ligh....
Check Stock

ACS712 Hall Effect Current Sensor Module 5A 20A 30A Range + Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Package Included】1pcs x 30A,1pcs x 20A, 1pcs x 5A ACS712 Current Sensor Module, and 1pcs x Voltage Sensor Module DC0-25V Voltage Tester Terminal....
  • 【Current Sensor Module】Chip: ACS712ELC-05A，Measuring range: ±5 amps, corresponding Analog output:185mV/A.--- ACS712ELC-20A，Measuring range:....
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • 【Pls Note】: ACS712 is based on the principle of Hall detection, please avoid the influence of magnetic field when using it!.
Check Stock

Vol-con Xl Solenoid Voltage Tester

  • Extremely rugged and reliable three-in-one tester.
  • Tests for high voltage up to 600V AC/DC, Tests for voltage as low as 6V AC/DC.
  • Bright, long-life LED and neon indicators.
Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock

Digital Multimeter Electrical Test Kit Non-Contact Voltage Tester Receptacle Tester Carrying Case and Batteries Klein Tools MM320KIT

  • Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance.
  • Meter also test batteries, diodes, and continuity.
  • Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.
  • Bright flashlight illuminates work area and may be used independent of NCVT-3P voltage detection function.
  • ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels.
Check Stock

ANENG Digital Clamp Meter Multimeter Tester 4000 Counts with NCV Amp Ohm Volt Meter Measures AC Current AC/DC Voltage,Capacitance Resistance Diodes Continuity Frequency Backlight Electrican Tools

  • 【Quickly detect values and troubleshoot】The clamp meter can measure only for AC current (not for DC current), AC and DC voltage, resistance,....
  • 【Double Open Clamp】The maximum wire diameter that the multimeter can measure is 1.42 inches without interrupting the circuit. Double open jaws....
  • 【NCV Defection Function】Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage.The NCV non-contact AC....
  • 【Easily Carrying & Durable】The voltage tester where it can handle the demands of a long workday, from the durable exterior to the wide range of....
  • 【We’ve Got You Covered】Note: Make sure press “REL”to zero out the meter before clamping.The package of capacitor tester included....
Check Stock

Klein Tools CL380 Electrical Tester, Digital Clamp Meter and Non-Contact Voltage Tester, Auto-Ranging and TRMS, 400 Amps, LCD Display

  • Electrical Tester measures both AC/DC current via the clamp.
  • Non-contact voltage tester integrated into the clamp jaw.
  • High-visibility reverse contrast LCD display for improved viewability in all ambient lighting conditions.
  • Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy.
  • Measures AC/DC voltage, DC micro-Amp current, resistance, continuity, frequency, duty-cycle, capacitance and tests diodes via the test leads.
Check Stock