Top Volume Damper

FireHiking Titanium Stove Camping Tent Burning Stove Foldable Ultralight

• Backpacking: After folding, the volume is small and can be put into the backpack. The weight is 1.8 kg / 4 lb, and the ultra-lightweight is easy to carry and transport..
• Ultralight Stove: The stove is made of titanium, which is strong and heat-resistant, and has the characteristics of rust and corrosion resistance..
• Glass Windows: The transparent glass windows on the sides can observe the fuel combustion in the camping stove, which is convenient for adding fuel in time..
• Foldable Design: The stove and legs are foldable, this design reduces the chance of losing hardware components..
• Controllable Switch: Turn the handle to open and close the damper to control the amount of smoke exhausted from the stove and affect the burning speed of the wood..

Hot Tent Stove,Camp Tent Stove,Portable Wood Burning Stove for Tent,Shelter,Camping Heating and Cooking,Stainless Steel Camping Wood Stove Folded Only 3.9 Lbs

• ...and is not easy to deform.The folding thickness is only 2.3 inches and it is equipped with a nylon handbag,which is very suitable for outdoor carrying..
• 【2 Rotatably Adjustable Dampers】-Added adjustable chimney base damper and stove door damper,can be used in combination by adjusting smoke exhaust and air intake volume,to control the fire and sustained burning time..
• 【Secure​Spark Arrestor】-It fits directly on the base of the chimney,it not only prevents sparks from entering the chimney and burning the tent but also keeps the heat inside the stove,lowering the temperature in the chimney and achieving the effect of heating..
• 【High Temperature Resistant Transparent Glass】-The stove is equipped with quartz heat-resistant glass ​and anti-hot pull rings to observe the internal combustion of the stove without opening the door.When the wood is burning normally,you can use the anti-scald pull ring to open the door..
• 【Chimneys Can Be Installed In As Little As 15 Seconds】-The normal Installation height of the chimney is 98.4 inches(8.2 ft),and it does not need to be connected one by one.It only needs to be rolled up and fixed directly,which can save a lot of installation time and is especially suitable for outdoor use.And the top of the chimney....

Drolet Escape 1800 Wood Stove on Legs Large 2020 EPA Certified Wood Stove - 75,000 BTU – 2,100 sq.ft, Model# DB03105

• Included: cast iron legs with ash drawer, top air deflector, ceramic glass, side panels, ash lip, air damper.
• EPA 2020 approved - Average particulate emissions rate 1.54 g/h - Non-catalytic.
• Maximum log length 20" - Heating area 500 - 2,100 Ft2 - Maximum heat output 75,000 BTU/h (22 kW) - Overall firebox volume 2.4 - Maximum burn time 8 h.
• Steel thickness : body 3/16" / top 5/16" - Certified for mobile home and alcove installation.
• Proudly made in Canada - Limited lifetime warranty.

Duct Outlet 6\ Damper Sleeve w/ 1.5\ Stand-Off, 3/8\ Rod HVAC

• 6" Damper Sleeve w/ 1.5" Stand-Off, 3/8" Rod HVAC.
• 1½” Stand-Off for the locking Damper Handle.
• 20 Gauge Galvanized Damper Blade with 3/8" Rod.
• Crimped on one end to fit inside next ducting section.

Assault Racing Products 8000170 7.5\ LT-1 Chevy Harmonic Damper LT1

• Self-adhesive strip adheres to the Crank Vibration Damper.
• Spark advance up to 60 Degree instead of only 10 Degree-15 Degree as on chain case timing tab.
• Genuine Mopar Performance P4529070AB Damper Degree Timing Tape.

Tamiya 86012 Paint Spray, Silver

Innovala PI164-GR25, 25PACK Pin Damper Soft Close Cabinet Door, 25 Pack, Aluminized ABS

• Mounts easily with only one screw into the cabinet corner on the hinge side.
• Only one unit needed for most applications. Surpass kcma requirements.
• Screw and mounting instructions included.
• No pilot hole drilling necessary. Comes with self-tapping screw.
• Note: Mount the damper on the side of the door where the hinge is mountedDescriptionOur product Innovala is a German manufactured soft closing damper for kitchen & bath cabinet doors. Innovalas damper program is an innovative product that has been sold to the us cabinet and retail industry since 2008. We have sold millions and have been copied many times. We are the exclusive wholesale and retail distributor for the north American market. Its very simple to install our Innovala soft close dampers. First you need to make sure that your cabinet hinges are self-closing. In order to find this out, just open your cabinet door a couple of inches and let it go. If your door closes it has self-closing hinges, if it does not close and stays open your cabinet hinges are not self-closing and not one soft close damper in the market will work. Now you need to find the right location to install the damper. Always use the top corner closest to the hinge. Our instal....

TFL3Z-99406A10-A ailgate Assist,Tailgate Damper Shock Assembly Kit ,Fits for Ford F-150 2015, 2016, 2017, 2018, 2019,Tailgate Assist Shock Strut,Lift Support Kit,Replaces# FL3Z99406A10A

• ...ailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering. No more slamming down tailgate,The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body.This kit safely lowers the tailgate in a slow and controlled manner..
• ★ High Quality: Normal wear and tear from use is already an issue with tailgate damper kit, but bumpy roads and potholes can also grate on the alignment of your trucks gate as well. Made from high-quality and extensively tested stainless steel, this damper will not just protect your limbs from damage but will also save the integrity of your tailgate..
• ★ This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
• ★ 100% Satisfactory service, if you have any questions, please feel free....

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

• 【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
• 【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
• 【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
• 【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
• 【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....

Tamiya 56336 RC King Hauler Black Edition

Dundas Jafine DRB4XZW Recessed Dryer Vent Box, 4\

• Spring loaded damper system offers complete noise control with no flapping louvers or dampers during inclement weather.
• When the dryer, bath fan, or exhaust is turned on, the air forces the damper open allowing the air to exhaust..
• When appliance is turned off, the damper is pulled to a secure, closed position.
• UV resistant coating to prevent the cap from discoloring.
• Paintable to match the exterior of your home.

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

• Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
• Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
• INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
• The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
• Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....