Top Vortec 35oil Filter Adapter
WEILEITE 3.6 Engine Oil Cooler Filter Housing
- *NEW UPGRADED QUALITY & Improved Manufacturing. Products made in better raw material, Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Make the engine oil cooler have a longer service life..
- A good oil cooler filter adapter will help prevent oil leaking, keep the engine room working at the normal oil temperature and oil pressure, make you have a safe and pleasant journey..
- This Engine Oil Cooler Filter is Compatible with 2013 Ram 1500 6 Cyl 3.6L.
- 2012 2012 2013 Ram C/V 6 Cyl 3.6L. Adapter-Engine Oil Filter, OE No. 5184294AE.
- Replacement for 2011 2012 2013 Chrysler 200,300,Town & Country.
- Dodge Avenger,Challenger,Charger,Durango,Grand Caravan,Journey.
- Jeep Grand Cherokee,Wrangler 6 Cyl 3.6L..
- Any questions please contact us, we are always here to provide professional help! ***All products are produced according to standard specifications and have been quality-verified before leaving the factory. Some customers think that the size of the product is not suitable, it may be that your model is a little different, and you can use it with simple modifications..
Check StockKIPA Oil Filter Adapter Replace for Small Block Chevy V8 Engines SBC BBC Spin On Bypass 305 307 327 350 400 396 402 427 454 # 3952301
- Top Quality Well-Machined KIPA Oil Filter adatper, keep your vehicle oil cooler intact. Bolts right up and fits.
- MPN: Directly replacement Part Replace for Part # 3952301.
- Fitment: This oil filter adapter replaces for the Chevy Small and Big Block V8 Engines SBC BBC 305 307 327 350 400 396 402 427 454. Please do match the OE Part Number and the Adapter structure..
- It Fits the following engines using a spin on filter wix 51069,AC PF25,Morose 22459 from 1968-1986.
- Important Notice: Two bolts as pictured comes with the adapter, there is no gasket needed to install this part. If you put a gasket on this product it may come apart and get sucked into your motor causing oil pressure loss and damaging the engine badly if not destroying it..
Check StockEngine Oil Cooler and Oil Filter Housing Adapter Assembly,Compatible With 2011-2013 Chrysler 200/300,Dodge Journey Charger Caravan And More,Replaces 5184294AE
- ... Chrysler 300, 2011-2013 Chrysler Town and Country, 2011-2013 Dodge Avenger, 2011-2013 Dodge Challenger, 2011-2013 Dodge Charger, 2011-2013 Dodge Journey, 2011-2013 Dodge Caravan, 2011-2013 Dodge Durango, 2013 Ram 1500, 2012-2013 Ram C/V Base. ( Only for 3.6L 6 cyl engine)!.
- 【Advantage】- Oil filter housing adapter assembly comes with a complete set of accessories required for installation , And comes with pre-installed oil filter, fluid temperature sensor, oil pressure sensor, Bypass Valve & Spring and NBR sealing ring. also comes With 12 pieces of Intake Manifold Plenum Gasket Set for a complete and worry free installation. In addition, one high-quality oil filter is given as a gift, so that you can use it next time you change the oil filter..
- 【High performance】 -The engine oil is filtered through the Oil filter housing adapter assembly, remove foreign particles it also cool down the oil that enters the engine to maintain the clean and efficient operation of the engine! quality materials used, meets or exceeds OEM standards, 100% tested before shipping. Even though it is not a genuine Mopar oil filter housing, but it works even better and last longer!The price is only a small part of the dealer!.
- 【After-sales service】-Professional....
Check StockEngine Oil Cooler and Filter Housing Adapter Kit 68105583AF 68105583AE Replacement for Chrysler Dodge 3.6L V6 Vehicles 200 Town & Country Grand Caravan Wrangler Ram
- With Intake Manifold Plenum Gasket Set- Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
- Function- Replacement engine oil cooler & filter housing adapter kit with Intake Manifold Plenum Gasket Set.It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean.Beside that, it also cool down the oil that enters the engine.
- Easy to install- Using high-quality materials, it can be directly replaced and installed, which is simple and fast..
- Fitment- 2014-2017 Chrysler 200 3.6L engine, 2014-2016 Chrysler Town & Country 2014-2018 for Dodge Challenger, 2014-2017 for Dodge Charger, 2014-2015 for Dodge Durango, 2014-2016 for Dodge Grand Caravan, 2014-2017 for Dodge Journey, 2014-2016 for Dodge Ram Promaster, 2014-2017 for Dodge Ram, 2014-2015 Grand Cherokee, 2014-2017 Wrangler and 2014-2016 Cherokee 3.2L engine..
- Tips- Professional installation is highly recommended. we provide after-sales service for oil filter housing cooler assembly..
Check StockBTR Brian Tooley Turbo LS Stage 2 Cam, Spring Kit with Steel Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2
- Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0.
- Cast passenger and driver side manifolds.
- -4AN oil feed kit with adapter plate + Hardened stainless hardware.
Check StockXtensi Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible With 2011-2013 Jeep, Chrysler 200/300,Dodge Journey Charger Caravan 3.6L Aluminium, Replaces 5184294AE
- Oil Filter Housing Adapter is not a genuine part, it is a direct replacement and will fit, work and look exactly like the factory part. Replace Part Number: 5184294AE. Please check the part number before purchase..
- Only for 3.6L 6 cyl engine. Compatible with 6 cyl 3.6L engine 2011-2013 Chrysler 200, 2011-2013 Chrysler 300 V6 3.6L, 2011-2013 Chrysler Town and Country V6 3.6L, 2011-2013 Avenger V6 3.6L, 2011-2013 Challenger V6 3.6L, 2011-2013 Charger V6 3.6L, 2011-2013 Journey V6 3.6L, 2011-2013 Caravan V6 3.6L, 2011-2013 Durango V6 3.6L, 2011-2013 Grand Cherokee V6 3.6L, 2012-2013 Wrangler V6 3.6L, 2013 Ram 1500 V6 3.6L, 2012-2013 Ram C/V Base V6 3.6L..
- Advantage: Keep the engine oil clean and cool. This replacement oil cooler housing comes with a new pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine. Direct replacement. Fluorocarbon and HNBR sealing rings are resistant to oil, abrasion and temperature..
- The oil cooler is made of lightweight aluminum alloy, has 16-plate (8 plate thick and 8 plate thin), can be better cooling. Oil filter housing adapter oil cooler kit comes with a complete set of ....
Check StockLS Oil Galley Diverter Restrictor Barbell Engine Block Plug Compatible with all GM Chevy 1997-2014 LS Series Engines LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 4.8L 5.3L 5.7L 6.0L 6.2L Vortec
- ...orn-out LS Oil Passage Diverter to prevent oil seepage or oil bypassing the oil filter. This is also a part that is overlooked when reassembling an engine which will cause little to no oil pressure resulting in engine failure..
- Compatible with ALL Chevrolet GM LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines..
- This installs in the oil galley hole behind the rear engine cover on the rear of the engine on the driver side. Non-O-ring end goes into block 1st. If you are not sure if your rebuilt or fresh rebuild with little or no oil pressure is missing this, you can remove the rear threaded oil galley plug above the oil filter location and see if you can see the shaft of this barbell through the hole. Comes with 1ea oil passage barbell..
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you....
Check StockAluminum Engine Oil Cooler Oil Filter Housing Adapter Assembly 926-876 With Gaskets Sensor Compatible With 2011-2016 Chrysler 200 300, Dodge Charger, Grand Cherokee, Promaster 3.6l V6 68105583AF
- ...C/V,V6 3.6L 2014-2016 Ram Promaster 1500/2500/3500 and V6 3.2L..
- 【Replaces Part Number】926-876,926-959,68105583AF,68105583AE ,68105583AA,68105583AB,68105583AC,68105583AD..
- 【Direct Fit】This aluminum oil filter adapter housing assembly is designed to MEET or EXCEED standards of original factory Engine Oil Filter Adapter. Guaranteed Exact replacement for PLUG & PLAY. Manufactured from quality materials, 100% tested before shipping..
- 【12-Month Warranty】We provides one-year after-sales service of aluminum oil filter housing cooler assembly. If you are not completely satisfied with the 3.6L engine oil cooler aluminum oil filter housing assembly, you can rely on our free replacement or refund service..
Check StockWWDOLL Kids KN95 Face Mask 25 Pack, 5-Layers Breathable KN95 Masks for Children, Black
- This EMF Outlet Oil Mist Filter is suitable for all Edwards Rotary Vane pumps up to E2M18..
- This EMF10 EMF-10 exhaust filter assembly is supplied with NW25 clamp, centering ring, O-Ring, NW25 to 3/4 BSP adapter, 1 oil element filter and 1 odor element..
- The benefits of the oil mist filter includes: protection from oil mist emissions as required by COSHH and health and safety regulations. If the oil element becomes blocked, an integral pressure relief valve opens..
- This filter is very efficient at 99.999% DOP test and is also azide proof..
- The white bottom half of the body is semi-transparent, allowing the oil level to be monitored. Replacement oil elements and odor elements are available on this website..
Check StockGlowShift Oil Filter Sandwich Adapter Compatible with GM Duramax Chevy Silverado GMC Sierra 2000-2013 - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs
- GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
- Compatible with 2000-2013 Chevrolet Silverado & GMC Sierra Duramax.
- Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) 13/16-16 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
- Includes Step-By-Step Installation Instructions.
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock2-Pack Mercury Marine Mercruiser Oil Filter 35-866340K01
- Genuine OEM factory original equipment Mercruiser Oil Filter PN 866340K01.
- Fits all Mercruiser sterndrive and Inboard GM engines except 4.3L V6 without remote oil filter.
- Fits GM 3.0L, 4.3L V6 with remote oil filter, 5.0L 305, 5.7L 350, and more.
- Replaces Mercury 35-866340Q03 and Sierra 18-7824-1.
Check StockNeewer NW-35 Microphone Boom Arm Kit, Microphone Scissor Arm Stand with Mic Clip, Pop Filter and 3/8” to 5/8” Adapter, Compatible with Blue Yeti, Blue Snowball, etc
- Enhanced Boom Arm: Made of solid steel, NW-35 Mic Boom Arm is durable with a maximum load capacity of 3.3lb (1.5kg). The C-clamp can securely fit onto a desktop up to 1.7” (45mm) thick for studio and home recordings.
- NOTE: Blue yeti snowball yeti X microphone can be directly mounted on the arm stand via 3/8" to 5/8" screw adapter, please DO NOT use with the shock mount to avoid instability..
- Flexible Positioning: The Mic arm is 360° rotatable. The two reinforced springs allow smooth angle adjustment for you to get the best positions with ease.
- General Compatibility: The included 3/8” to 5/8” adapter is compatible with various shock mounts and microphones, including Blue Yeti and Blue Snowball.
- Practical Accessories: Mic clip fits microphones 35mm in diameter and the double-layer pop filter effectively reduces air blasts for vocal recordings.
- Package Contents: NW-35 Boom Arm, Desktop C-Clamp, NW (B-3) Pop Filter, Mic Clip, 3/8” to 5/8” Adapter.
Check Stock