Top Wall Insulation For Heat

AIRIC 3/8in Heat Shrink Tubing Roll, 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat-Shrink Tubing Industrial, Black, 50 Feet Roll

  • What You Get: Industrial black heat shrink tubing roll, Dia 3/8 inch (9.5mm), 50 feet length..
  • Adhesive Lined Black Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing clear is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief. Outer wall is flame retardant, but the glue is not flame retardant..
  • Wide Applications: Our clear waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

Ferplast Kit of 6 Insulating Panels for Dog Kennel Model DOGVILLA 90, Insulation kit for Dog Kennel Dog House, Thermal Insulation Panels, Easy Installation, 74 x 57 x h 9 cm

  • Complete kit of six PVC insulating panels. It also includes a plastic wall to be replaced with the opening wall of the Dogvilla kennel.
  • The pannel allow you to completely isolate the inside of the kennel from the outside so as to retain heat and control the cold in winter.
  • In winter, we recommend applying all six insulation panels to the walls and roof, while the fixed side should be attached instead of the opening side.
  • The insulation kit is available in different models suitable for all thermoplastic resin kennels Dogvilla by Ferplast.
  • This model is ideal for dog kennels model Dogvilla 90 and it also includes a set of screws to connect the plastic side wall to the Dogvilla kennel.In summer, use two insulation panels and fix them under the roof of the kennel and protect from sunlight.
Check Stock

Mr Heater MH18CH F227500 Radiant 18,000 BTU Portable Propane Cabinet Heater

  • (Wall Mounted Heater Only.) Wi-Fi enabled makes it possible for you to control the temperature from your phone!.
  • Safe to the touch grill. 1500 watts of power.
  • Space saving wall mount design means you don't lose floor space. Perfect for bedrooms, kitchens, offices and more.
  • When installed over the outlet, you can hide the cord inside the heater. This unit stays cool to the touch and the wall stays cool..
  • Safe to the touch grill. Wall mounted version, Feet not included..
  • 1500 WATTS of power and 5200 BTU. As a primary heat source: (Up to 150 sq. ft of zone heating (in a well-insulated room). As a supplemental heat source: (Up to 1000 sq. ft of zone heating (depending on room insulation).
Check Stock

2 Pcs 3/4 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Cable Protector by YUKSY (4ft, Black & Red)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 3/4" in diameter large heat shrink tubing black and red (Note: it is 3/4" in round diameter, but not 3/4" in width). Other sizes also a....
Check Stock

Wirefy Heat Shrink Tubing Kit - 3 1 Ratio Adhesive Lined Marine Grade Shrink Wrap - Automotive Industrial Heat-Shrink Tubing - Black Red 200 PCS

  • 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation..
  • VARIETY OF SIZES - We have included larger diameter heat shrink tubing ranging from 1/8" to 1". Shrink tubing is precut to 1.75 inches..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Professional connections made in seconds..
  • DUAL WALL TUBING - Outer wall provides abrasion resistance. Inner wall creates waterproof seal and strain relief..
Check Stock

1/2 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 4 feet long 1/2" in diameter large heat shrink tubing (Note: it is 1/2" in round diameter, but not 1/2" in width). Other sizes also available in our stor....
Check Stock

Abco Refrigeration CU0415MA-1A Essential Ice Undercounter Ice Maker, Medium Cube Style, Air Cooled, 2 Circuit Wires, 50 lb. Production, 115V/60 Hz/1-ph

  • ...iling water is added, boiling hot steam may push the lid up and cause potential danger..
  • TOP MATERIAL:High quality stainless steel double-layer vacuum structure, the outer layer of the cup body is made of food grade stainless steel, which can be completely disassembled and washed without BPA, creating a very thermal insulation effect. Food grade stainless steel inner tank, with heat insulation layer and vacuum temperature locking layer on the outer wall of the inner tank to enhance the cold and heat preservation effect.(Insulation duration: more than 12 hours).
  • WIDE MOUTH: Wide mouth of diameter 2.25 inch, especially designed for ice lovers, you can put big ice cubes into the bottle without stucking in the middle. BPA free food-grade bottle guarantees no flavor transfer to ruin the original taste of your water..
  • EASY CLEAN: It can be washed manually or by a long-handle brush. DO NOT clean the bottle with stainless steel scrubber, it may scratch the powder coating badly..
Check Stock

2 Pcs 1 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black & Red)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 1" in diameter large heat shrink tubing black and red (Note: it is 1" in round diameter, but not 1" in width). Other sizes also availab....
Check Stock

Wirefy Heat Shrink Tubing Kit - 3 1 Ratio Adhesive Lined Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black 180 PCS

  • 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation..
  • VARIETY OF SIZES - We have included 7 most commonly used diameters ranging from 3/32" to 3/4". Shrink tubing is precut to 3.5 inches..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Professional connections made in seconds..
  • DUAL WALL TUBING - Outer wall provides abrasion resistance. Inner wall creates waterproof seal and strain relief..
Check Stock

PIILOO Portable Propane Forge Single Burner Furnace for Blacksmith Tong Knife Farrier Tool Forging Making Large Capacity

  • Structure--Internal large capacity (7.5"x10"x6.3") with oval design, provide the largest working space, suitable for various small forging works. Full size thick refractory bricks (4.5" x 9" x 1.25"), placed at the bottom of the forging furnace, serves as a solid base for the metal stock..
  • Rapid Heating--High efficient single forge burner can easily heat metal stocks to 2300+ °F / 1260+ °C. Oval-shaped forging wall can help heat the workpiece uniformly, improve efficiency and save your time..
  • Easy-Regulation--Equipped with gas pressure regulator with a rating of 0-20 PSIG, can provide excellent neutral flame and easily adjust the flame temperature. 55.9 inch hose pipe can keep the gas tank away from the hot temperature to ensure safety..
  • Superior Heat Insulation--Equipped with 1 inch thick high density ceramic fiber blanket, which can withstand temperature up to 2000+ °F, provides excellent heat insulation performance, reduces fuel consumption and increases propane forge’s service life..
  • Package Includes--1X portable propane forge, 1X burner assembly, 1X ceramic fiber blanket, 1X gas pressure regulator & hose pipe, 1X firebrick..
Check Stock

Stainless Steel Double Insulated Gravy Boat with Hinged Lid (16 OZ / 450ML)

  • Double Wall Insulated: Gravy boat with lid -Double wall insulation keeps gravy and other sauces hotter for longer. Also ideal for keeping milk and cream cooler for longer..
  • Features anti-drip:Metal gravy boat-spout for smooth pouring plus a hinged lid for heat retention and to make re-filling a breeze..
  • Stainless Steel:Sauce Jug-Satin Finish premium Stainless steel body with strong, easy grip chrome effect rim and lid (made from hard wearing heat resistant plastic for durability).
  • Hinged Lid - Gravy boat with lid and ladle:The BPA free plastic heat-resistant hinged lid and handle enable safe and easy pouring with one hand.
  • Large capacity- Gravy boat with saucer:Large capacity of 16 fl oz, enough for parties or festivals to share delicious food with friends.
Check Stock

Nesco 30 Cup Coffee Urn

  • Double-wall insulation allows it to retain heat longer than single-wall models.
  • This Nesco coffee urn has an approximate brewing time of 1 cup per minute.
  • This coffee urn is made from durable stainless steel.
  • Can hold up to 30 cups (5.7-oz each) / Indicator light.
  • Stay-cool handles for extra safety / Locking lid / Includes a handy water gauge.
Check Stock