Top Waste Metal Shear

CMT P07024 ITK Plus Fast Framing Saw Blade, 7-1/4 x 24 Teeth, 10° ATB+Shear with 5/8-Inch003c003e bore

  • For framing/decking & general construction. Faster cuts thanks to the special teeth geometry..
  • For cutting lumber, plywood and OBS sheets. To be used on portable and cordless circular saws..
  • 0.069 kerf thickness, 0.043 plate thickness, 20° hook angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock

Cricket S1 Pro Series 500 5 inch Shears Professional Stylist Barber Hair Cutting Scissors, Convex Edge, Swedish Steel

  • ...he edge by stabilizing the blades causing a more evenly distributed wear pattern. Custom each cut by tightening for fine hair or loosening for thick, coarse hair..
  • DETACHABLE FINGER REST - This shear is equipped with a detachable rubberized finger rest. This small piece of metal off the finger ring helps the stylist with control and balance when cutting hair. The detachable rest is rubberized for an easy grip and is threaded at the base to be unscrewed to detach if desired. This ergonomic shear, puts less stress on the hand, arm, shoulder and back while the stylist works, helping to reduce pain in the hand, elbow, shoulder and back..
Check Stock

CMT P10042W ITK Plus General Purpose Saw Blade cutting kit with 10-1/4\ x 42 Teeth, 10 degree ATB/Shear with 5/8\ Bore

  • Special Carbide prevents material failure, Non-Stick Orange Shield protects against corrosion..
  • For excellent rip and crosscuts on wood and plywood. Fast rip cut with high precision!.
  • For use with radial arm saws, miter saws and table saws for cutting soft/hardwood and plywood..
  • 0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
Check Stock

CMT P07024-X10 ITK Plus Fast Framing Saw Blade Masterpack, 7-1/4 x 24 Teeth, 10° ATB+Shear with 5/8-Inch003c003e bore - 10-Pack

  • For framing/decking & general construction. Faster cuts thanks to the special teeth geometry..
  • For cutting lumber, plywood and OBS sheets. To be used on portable and cordless circular saws..
  • 0.069 kerf thickness, 0.043 plate thickness, 20° hook angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock

Micro Jig SG-133 MATCHFIT Setup Gauge by MICROJIG. Dado Stop Accessory, Yellow

  • All-In-One Brake Machine: Industrial 12in 3-in-1 sheet metal machine is a smart choice for shops. This machine combines three functions into one that utilizes up little floor space and enhances work efficiency..
  • Solid Construction: This 3-IN-1 brake shear roll has a heavy cast-iron frame. The slip roll portion of the shear brake roll has hardened and polished shafts for long life. Designed to perform in a harsh condition and can stand for longer life..
  • Flexibility & Precision: The vertical press brake portion of the shear brake roll machine has a maximum bend angle of 90 degrees with adjustable fingers on the top beam to easily assist with making any size boxes. This ensures adjustability and high accuracy..
  • Manual Operation: You can operate the machine with this lever to make any bendings and rollings as you need. Roll diameter: 39mm. Max. Bending angle: 90°Max. thickness: 20Ga..
  • Multiple Utilization: Widely used in factories, workshops, shops, etc. This 12" brake shear roll can be utilized to cut multiple materials. The shear can be used for mild steel, aluminum, brass, copper, lead, plastic, and zinc..
Check Stock

SHALL Electric Metal Cutting Shear, 4.0-Amp Corded Sheet Metal Cutter, Variable Speed with 360 Degree Swivel Head, Continuous Cutting, Clean Cut for 14GA Sheet Metal & 16GA Stainless Steel, 2500 SPM

  • Clean cut: Double cut design for creating a 1/4-inch curled metal thin strip during operation by the double-cut blade. Compared with traditional manual metal shears and single cut shears that creating lots of tiny metal chips and wastes, ours 4-amp electric power metal shear delivers fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, ours key advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
  • 360 degree swivel head: Cutter head can be adjusted to a desired position for delivering comfortable cuts from any angle or direction. Offer convenience for cutting straight lines, large curves, circles and irregular shapes. Loosen the three hex head bolts, firmly grip the cutter head and twist it to the desired position then tighten the three hex bolts.
  • Variable speed operation: Speed (0-2500 SPM) is allowed to vary by users. Press trigger lightly to cut slowly and press trigger heavily to cut quickly. For stop cutting, just release the trigger to turn off the shear. Flexible and easy to control the cutting speed. Variable Speeds for users to cut specific materials in different situations.
  • Cutting capacity: Cutting up to 14 gauge sheet metal and 16 gauge stainless steel. In add....
Check Stock

6201 - Key Blades and Fixings 10\ x 5/8\ Arbor 40T Saw Blade Table saw Drop saw Blade Teflon Coated Professional Quality saw Blade Best for Quality and Price Saw Stop Compatible

  • For fast rip and crosscuts. Excellent cut on plywood, soft and hardwood..
  • To be used on radial arm saws, miter saws, table saws..
  • 0.102 kerf thickness, 0.071 plate thickness, 18° cutting angle, 10° ATB+Shear grind..
  • Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
  • Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..
Check Stock

GALAX PRO Electric Shear 4 Amp Corded Snapper Shear Variable Speed 0-2500 SPM Sheet Metal Shear with Belt Clip

  • Powerful Motor: The J1J-HD-1.2 Electric Shear holds a powerful 4Amp motor to meet your various cutting required projects.
  • Large Application: This tool provides fast, smooth and clean cuts. It is designed to cut mild steel sheet metal up to 16 gauge, try using on flashing for siding or roofing applications.
  • Three Blade Cutting System: The J1J-HD-1.2 Galax Pro Electric Shear creates ¼” ribbon of curled metal as it is cut, for clean, non-deformed edges.
  • Lock-On Switch: The Lock-On Button on the handle of the tool enables you to continue your work with no disturbances and have a free hand during projects. The Lock-On Button will give you a simple and easy user experience instead of tiring and heavy.
  • What you get: 1 x electric shear, 1 x hex-key, 1* manual, 1* warranty card.
Check Stock

PowerSmart Part Number 302080047 Chute Deflector Cable w/Spring

  • Enough quantity: Each package includes 20 sets of shear pin and cotters pin in sufficient quantity, enough for your daily use and replacement in winter..
  • Adaptable model: Our cotters pins & shear pin kits models are 738-04124 and 714-04040, suitable for MTD Craftsman Cub Cadet Troy Bilt snowblowers..
  • Good compatibility: You can use our products on a variety of machines. They are compatible with a variety of MTDs, yard machines, yard workers, snow blowers and lawn tractors..
  • Reliable quality: Our shear pins and cotter pins use high-quality metal raw materials, which can be rust-proof and corrosion-resistant..
  • Attention: Please consult your machine manual before ordering to make sure the replacement parts are correct..
Check Stock

Freud D1090X Circular Saw Blade, Multi

  • Shear-face grind design delivers effortless cuts with a reduced amp draw on tools for less material waste and to help maximize tool performance.
Check Stock

7-1/4 X 56 NON FERROUS/PLASTIC

  • Shear-face grind design delivers effortless cuts with a reduced amp draw on tools for less material waste and to help maximize tool performance.
  • Laser-cut stabilizer vents trap noise and vibration and stabilizes the blade.
Check Stock

PacTool SS424 Backerboard Shear - Fiber Cement Cutting -Contractor Grade- Professional Power Tools

  • CONTRACTOR TOOL: Cutting is finally easy with this precision-machined shear head with a contractor-grade 6.5-amp motor, capable of powering through to....
  • CEMENT BOARD: Get the tile project done with our electric metal shear. This tool is specifically designed to shear the backer board rather than cut so....
  • CUT OUT TOOL: No more score and snap. This tool's versatility makes it ideal for inside corner cuts, with far fewer broken corners. Equipped with....
  • SMART SHEARS: Developed to minimize harmful airborne dust while using it, this product allows workers to cut and install both inside and outside of....
  • PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line....
Check Stock