Top Water Cooled Flooded

Acquaer 1HP Sump Pump 4948GPH Submersible Drain Pump with Automatic Float Switch, Remove Clean/Dirty Water for Basement, Hot Tub, Pools, Garden Pond

  • High Performance: 1HP sump pump has large capacity and strong suction with Max. Flow 4948GPH or Max. Head 30ft. Powerful capacitor motor ensures efficient and quiet operation. This dirty water pump can handle up to 1-1/3″ soilds, ideal for draining flooded basement. It can also transfer clean water for garden irrigation.
  • Portable & Durable Design: Reinfored engineering thermoplastic casing resists corrosion and abrasion. Carrying handle with lightweight, easy to transport. Quality mechanical seal prevents leakage effectively for long service life. When dry running causes overheating, built-in thermal overload protection will shut down the pump to prevent burning..
  • Multi Outlet Adpater: 1-1/2'' NPT discharge comes with 1-1/2'' elbow adapter and snap coupling adapter of 3/4'', 1'' or 1-1/4'', easy to install. Higher base plate prevents debris collection in the sump pit. Fully immerse the pump before startup and prevent it from freezing in cold winter.
  • Portable & Durable Design: Reinfored engineering thermoplastic casing resists corrosion and abrasion. Carrying handle with lightweight, easy to transport. Quality mechanical seal prevents leakage effectively for long service life. When dry running, built-in thermal overload protector will shut off the pump....
Check Stock

WeldingCity TIG Welding Torch Accessory Kit Large Gas Lens Setup 1/8 Collet-Large Gas Lens-Cup-Gasket-Back Cap for Torch 9 20 and 25 Series Lincoln Miller Hobart ESAB Weldcraft CK AHP T45

  • Premium TIG welding torch accessory kit (large gas lens set-up) for air-cooled and water-cooled TIG torch 9, 20 and 25 series for use with Tungsten....
  • Accessory kit contains torch consumables 13NL-series collets and 45VS large gas lens collet bodies (0.040", 1/16", 3/32" and 1/8"), 53N/57N-series....
  • Detailed content description for each accessory kit is shown in listed parts table and pictures. Compatible with TIG welding torches from Lincoln,....
  • For use with air-cooled TIG welding torch 9-series (125-amp), water-cooled 20-series (250-amp) and 25-series (200-amp)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WaterAce WA59UP Submersible Utility Pump, Black

  • Ideal for flooded basement floors, window wells, spas, cisterns and sumps.
  • Great for recirculating water in water fountains or water falls.
  • Ideal when automatic turn on or off is needed.
  • Integrated automatic on and off smart switch.
  • Download the user manual under the technical specification section of this page for safety, installation, troubleshooting, and information.
Check Stock

Lanchez Sump Pump Submersible Utility 1/4 HP Pump with 1556 GPH Flow for Water Removal，Portable Water Pump, Drain Pump for Swimming Pool Garden Pond Basement, Transfer Pump 25 feet Power Cord- Black

  • 【Application of Pump】The submersible pump is designed for water removal in home applications. Pump can be used for sump service and dewatering. Great for flooded area, flooded basement, swimming pools, cellars or garden pond..
  • 【1/4 HP Power Energy】The sump pump has professional-grade power.1/4 HP motor. It can maximum lift water up to 26.5ft and 1556 gallons per hour rating tackles any draining job at a fraction of the time..
  • 【Safety Ensure】The pump is made of the thermoplastic composite material, which is highly rugged, anti-corrosion, ensure its the service of products from details. According to the valid safety requirements, Lower noise and energy-efficient..
  • 【Lightweight and Compact】The water pump will be directly running when power on, can remove water level down to 0.2''. Easy to install for quick draining, portable small pump with 25 ft power cable..
  • 【Notice and Warning】 Do not use power cord to lift motor for utility pump. Always use handle. Thread outlet pipe into pump body carefully to avoid stripping or crossing threads. Pump should be located and should rest on level solid foundation..
Check Stock

BestEquip Cooling System CW5200DG Industrial Water Chiller CW-5200 White

  • Product Parameter: The CW-5200DG industrial water cooler chiller is 8.5L capacity, Using standard R470C refrigerant,10L/max.flow, Precision:....
  • Efficient Cooling Fan: The water cooler chiller has two professional forced air-cooled radiators, high heat dissipating capacity, and not easy to be....
  • Constant & Intelligent Temperature Mode: CW-5200 series industrial chiller can be used to cool high-power lasers. Two working temperature modes are....
  • Various Alarm Functions: This professional industrial chiller has multiple warning protection mechanisms such as water flow alarm protection, high/low....
  • Multiple Application: CW-5200 Series professional industrial water cooler machine is suitable for small water-cooled cooling devices requested....
Check Stock

Rage RC B1207 Super Cat 700BL Brushless RTR Catamaran Boat

  • Adrenaline-pumping speeds of up to 40mph.
  • Brushless, water-cooled 2000Kv motor and 40A water-cooled ESC.
Check Stock

Alphacool Eiswolf 2 360mm AIO GPU Cooler with Backplate RX 6800/6900 XT Nitro+

  • Active cooling backplate：The newly developed and designed graphics card backplane water block covers the entire back of the PCB, which effectively....
  • Jet type micro channel structure:The 0.5MM gap has strong passability, even when using color powder or nano-silver water-cooling liquid, it is not....
  • T2 high-purity copper plate: The heat-absorbing plate of the water block is made of the national standard T2 high-purity purple plate, the base....
  • Suggested water way: The new bridge module is used for Unicom's graphics card water cooling head and backplane water cooling head. It is small in size....
  • Heat dissipation cooling water-cooled head backplate: The water-cooled head is equipped with an exclusive backplane of high-quality electroplated....
Check Stock

Fast Recovery Diode Module Full Crimped Structure MBRP400200CT 200A 25V -55~150℃ Rectifier Diode Module

  • FULL CRIMPED STRUCTURE: The diode module has full crimped structure with excellent temperature characteristics and power cycling capability.
  • AIR-COOLED AND WATER COOLING: The full crimped recovery diode block below 200A are forced air-cooled, modules above 300A are selected for air-cooled and water cooling.
  • STABLE PERFORMANCE: High quality of the diode recovery module can provide stable performance. Simple installation, easy to use and maintain.
  • AC 2500V: The recovery diode module is easy to use, the chip is electrically insulated from the backplane, 2500V AC voltage.
  • SPECIFICATION: ​Forward Average Current IF (AV): 200A.
  • One-cycle Forward Non-repetitive Surge Voltage IFSM: 25V.
Check Stock

EDTREK Performance Waterfowl Hunting Hat with American Flag Patch - Camo Duck Hunting Hat with Duck Embroidery (Old School Camo), One Size

  • HIGH PERFORMANCE - This cap is water-repellent, breathable and wicking. The inner band uses wicking mesh which allows air going through. Keep you cool and comfortable in woods or marsh.
  • PROFESSIONAL DUCK HUNTING HAT - Both old school camo and marsh digital camo pattern offers great concealment in flooded timber, flooded marshes and open fields.
  • LOOKS GREAT - Flying duck embroidery on front panel, American flag patch on side showing your pride as an outdoorsman. Great look for both indoors and outdoors.
  • MESH BACK - This performance cap features a mesh back which offers improved airflow, keeping your head cool and dry during wear.
  • ONE SIZE FITS ALL - EDTREK Navigator cap is fully adjustable, ensuring a comfortable fit across a variety of head sizes.
Check Stock

LIANQIAN Automatic Electric Ice Crusher and Ice Shaved Machine,1200W Water Cooled Countertop Snow Cone Slushie Maker With Stainless Steel Blade, Snowflake Machine For Commercial Use-485LBS/Day

  • ...ectric Ice Crusher and Shaved Ice Machine is a commercial-grade snow cone machine that is supported to produce up to 485 lbs of shaved ice per day.Works perfectly with all Nostalgia snow cone kits - try the Snow Cone Kit, Snow Cone Syrups, or the Straws and Cups..
  • 【Water-cooled High Efficiency】It features a water-cooled countertop design, unlike air-cooled machines, which can overheat and shut down if used continuously, water-cooled bingsoo machines can operate for longer periods without any issues. This helps to ensure that the machine can keep up with the demand for shaved ice, even during peak hours.No more pre-freezing ice cubes..
  • 【Stainless Steel Blade】This ice crusher uses high quality stainless steel bla-des to provide high efficiency and crush ice faster. High power 1200W motor ensures high speed to make ice slushie,continuously making a large amount of nice fluffy snow for summer fun desserts in a short time.Release your hands!.
  • 【0-60 Adjustable Speed】The snowball machines by adjusting the speed and uses different syrups, smoothies with different tastes and thicknesses can be obtained.Perfecting for mak....
Check Stock

MATX PC Test Bench Computer Water Cooling Open Frame Overclock Air Case Mini Aluminum HTPC Support Graphics Card

  • Case structure：MATX，Supporting integrated water-cooled installation (120 240 water-cooled drainage).
  • Package including：1 x assembly parts of computer case.
Check Stock

Miller Weldcraft A-200 Redhead TIG Torch Kit Flex 12.5 Rubber WP-R26F-12-R

  • Eliminate the expense of a water-cooled system. The air-cooled capability pairs reliability with cost-effectiveness for all field applications..
  • Maximum versatility. Utilize the Redhead Series torches in a variety of welding applications without adding expenses..
  • Flexibility. Using the A-200 Flex, the flexible neck easily adjusts to any angle for better torch control in limited-access joints..
  • Torch packages include torch body, handle, power cable and long back cap..
Check Stock