Top Water Hose Fittings

1/2’’ Soaker Hose for Garden 50 Ft, Soaker Hoses for Garden 100 Ft, Garden Soaker Hose 25 Ft Drip Hoses for Garden Drip Garden Hose Irrigation System (50 ft)

  • ... dry and free from fungal growth, while helping you conserve water. Then you will use less water to keep your plants growing and healthy, targeting only the base of your plants. Soaker hoses usually have a low up-front investment for the average home garden. They work well on timers to further conserve water..
  • Screw Fittings And Easy To Install - The soaker hose fittings are screw fittings. You can screw the end of the hose into the end of either another hose or the exterior faucet on your house. Installing a soaker hose is easy: simply hook up to the nearest faucet or rain barrel and snake around the plants you want watered..
  • Pressure And Length - Ideally, for this type of soaker hose, you are going to want the pressure to be about 10 PSI so that the water drips out of the hose slowly. If the pressure is too high, it will become a sprinkle. These soaker hoses come in 25 ft, 35 ft, 50 ft, 75 ft, and 100 ft lengths, so decide which one you prefer. Anything longer than these lengths will decrease the water pressure or need higher water pressure..
Check Stock

BISupply 10 Foot Water Pump Hose for Water Transfer Pump - Spigot Suction Intake Outtake Clear PVC Hose with Couplings

  • [Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
  • Use to evacuate a flooded yard, pump out water from a barrel, and more.
  • [Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
  • Fittings designed to fit standard garden hose spigot.
  • [Use Your Pump]: Threaded brass ends for use with your water pump.
  • Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
  • [No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
  • [Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.
Check Stock

1/2’’ Soaker Hose 100 Ft for Garden Beds , Soaker Hoses for Garden 100 Ft, Garden Soaker Hose 25 Ft Drip Hoses for Garden Drip Garden Hose Irrigation System (100 feet)

  • ... dry and free from fungal growth, while helping you conserve water. Then you will use less water to keep your plants growing and healthy, targeting only the base of your plants. Soaker hoses usually have a low up-front investment for the average home garden. They work well on timers to further conserve water..
  • Screw Fittings And Easy To Install - The soaker hose fittings are screw fittings. You can screw the end of the hose into the end of either another hose or the exterior faucet on your house. Installing a soaker hose is easy: simply hook up to the nearest faucet or rain barrel and snake around the plants you want watered..
  • Pressure And Length - Ideally, for this type of soaker hose, you are going to want the pressure to be about 10 PSI so that the water drips out of the hose slowly. If the pressure is too high, it will become a sprinkle. These soaker hoses come in 25 ft, 35 ft, 50 ft, 75 ft, and 100 ft lengths, so decide which one you prefer. Anything longer than these lengths will decrease the water pressure or need higher water pressure..
Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Check Stock

Lifynste Garden Hose Elbow Connector, 90 Degree Brass Garden Hose Elbow Adapter with Shut Off Valves

  • HIGH QUALITY MATERIAL: The brass hose elbow is made of 100% solid brass, durable, corrosion proof and has a long service time. Includeds 2 extra rubber washers included to prevent leaking..
  • ELIMINATE STRAIN: 90 degree garden hose elbow connector eliminates strain on hoses and water intake fittings, will extend the life of your garden hose by preventing twisting and straining..
  • CONVENIENCE: Standard 3/4 In. Our garden brass hose connector is designed to easily accommodate all standard hoses, equipped with high quality ball valves for easy and hassle free water flow..
  • THOUGHTFUL DESIGN: If your garden spigot is too close to the ground or wall, then our hose elbow connector is a must-have wonder. Perfect to change angle of conection, helps reduce unnecessary stress and strain on water intake hose fittings, easy to hook up water sprinkler timer, outdoor water faucet, great for garden, RV, lawn, etc..
  • PACKAGE INCLUDES: The 2 pack garden hose connectors comes with 2 pcs free rubber gaskets for replacement. TIPS: For outdoor use with cold water only. If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND..
Check Stock

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock

Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit – Marine Outboard Engine Flushing

  • ULTIMATE DUAL FEED FLUSHER: Use the Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit – Marine Outboard Engine Flushing to obliterate salt and mineral build up along with other contaminants from your outboard boat engine’s lower unit cooling system when hooked up to a garden hose.
  • Effective way to flush engine with fresh water to prevent clogging and corrosion and allow for engine adjustments.
  • EASY INSTALLATION: Requires no tools for installation or removal.
  • Simply slide the flusher muff cups over the top of the water intake slots on your boat and connect your garden hose to one of the included quick connect fittings to run motor out of the water or use to winterize motor.
  • Never turn water supply to full force or damage to drive may occur.
  • FITS YOUR BOAT: Compatible with most Johnson/Evinrude, Mercury, Yamaha, Chrysler, Force, Honda, Nissan, Suzuki, and Tohatsu outdrives.
  • As long as your boat includes side water inlet ports, this flusher is for you.
  • Rotate muff ears to fit and seal over the water pick-ups on the lower unit (cups swivel to be positioned horizontally or vertically for a multitude of ways to put it on).
  • NO LEAKAGE: Inferior round cups do not always fit correctly over intake ports, but....
Check Stock

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP

  • 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Check Stock

CGKJ Expandable Garden Hose 25ft with Extra Strength Fabric Triple Layer Latex Core, Flexible Water hose 3/4

  • ...ge Bag,3 x Spare Sealing Rings,. easy to store on the provided hanger or in the custom drawstring bag. Space saving. Makes a GIFT. Great for house/car/floor/yard washing, garden watering, pet cleaning..
  • ✿SOLID 3/4IN BRASS CONNECTORS : Expanding garden hose fits the typical outdoor garden taps in US,Has Solid Brass Fittings That Handle Water Pressure Better Than Plastic Fittings which maximum avoids of hose leaking water, and give excellent corrosion resistance and no rusting.
  • ✿MULTIFUNCTIONAL WATER HOSE NOZZLE : 10 watering patterns for every watering need,This heavy-duty nozzle have easy to use thumb control design,The No Squeeze, easy flow control allows for a controlled stream from a soft, delicate shower all the way to a high-velocity jet.The soft rubber coating handle makes this sprayer very comfortable to hold and it also prevents slipping.
  • ✿IMPROVED NEW HIGH QUALITY GARDEN HOSE : The flexible expanding water hose uses a high-density double-layer latex core and a powerful polyester fabric cover, to prevent breakage and leakage. It can withstand water pressure 3-12 Bar and temperature 41℉-113℉.No more worries about leaks, tear or cracks! The compact hose is for long-term use.
  • ✿EXPANDING GARDEN HOSE PIPE – Flexible garden hose is no....
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

  • 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
  • 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
  • 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
  • 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

  • [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
  • [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
  • [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
  • [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
  • [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check Stock