Top Water Powered Backup Sump Pump
Pump Sentry Emergency Power Battery Model 822PS for Sump Pumps 1200W Capacity by Sec America Bundle with HogoR Snap Top Battery Box (822PS+27-Snap-Top-Box)
- Pump Sentry will reliably power your sump pump during a power outage.
- it automatically switches to battery when AC power goes out & will automatically recharge when power is restored.
- UL & CSA accredited, this 1200 Watt battery backup is compact.
- it’s designed to operate most sump pumps up to 9 amps& comes with indicators for power output, battery charge, & battery replace.
- This sump pump battery backup is housed in rugged aluminum & comes in a compact size.
- supports full pump capacity & can be easily installed.
- For functionality of the battery backup, connect a 12Volt deep cycle marine battery (purchased separately) with a capacity rating between 90 & 200 ampere hours.
- The charging of the battery is resumed by the 822PS until the battery is returned to full capacity in preparation for the next power failure..
Check StockSuperior Pump 92911 1/2 HP Cast Iron Primary Sump Pump and Backup Pump Kit , Black
- Primary pump-pumps up to 4200 gallons per hour, pumps water up to 25 vertical feet.
- Pre-assembled kit: Primary pump model 92511 cast iron sump pump and 12V DC backup pump.
- Kit includes 87 decibel alarm, electronic control panel with indicator lights, battery box, mounting hardware, 2 AMP DC charger (12 volt deep cycle battery not included).
- Vertical float switch on primary and backup pumps.
Check Stockbriidea Dual Pump Install Kit - PVC WYE with Integrated Quiet Sump Pump Check Valves
- – The briidea dual pump install kit has everything you need to connect 2 sump pumps to a single 1 1/2″ discharge line. Full flow 1-1/2″ check valves and Y-connector allows maximum pump output.
- – Connects 2 primary sump pumps or primary and backup pump.
- – Easy installation with a standard screwdriver. There’s no need to purchase PVC pipe, elbows, couplings, no glue or cement required.
- – Silent check valves eliminate water hammering for quiet operation.
- – PRODUCT GUARANTEE: You can enjoy our first-class service with free refund without reason, 2-year warranty and 24-hour support for customer service.
Check StockSump Pump M95
- Includes: Model 53 115-volt pump, Model 508 Aqua not, 115 Volt DC backup system with pump, check valve, float switch and piping.
- Comes fully assembled and ready to install in your clear water sump.
- Extra protection when the primary AC pump fails due to power outages.
- Fully solid state automatic 10A charger/controller with alarm, light indicator and warning system.
Check StockPumpSpy Silent Sump Pump Check Valve - 1-1/2 with Buna-N Couplings Model CV-150 Spring-Loaded Flapper Quiet Check Valve Sump Pump Life Expectancy Increase Includes Steel Clamps Fit 1-1/2″ Pipe
- QUIET OPERATION: Our sump pump check valve has a unique spring-loaded flapper that helps eliminate the water hammer noise that standard check valves produce. The water hammer noise occurs when the discharged water slams the check valve flapper down. This silent check valve can bring a quiet operation to your sump pump..
- CLEAR VALVE BODY: This check valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational..
- INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 1-1/2" Schedule 40 pipe. Fits within a 5-1/8" gap..
- KEEP WATER OUT: This check valve is designed to keep pumped water within the discharge pipe from falling back into the sump basin. A fully functional sump pump check valve can increase pump life expectancy by preventing water from being pumped twice..
- ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevents costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working pr....
Check StockBasement Sentry Automatic Emergency Backup Sump Pump System (12V Battery Powered) Provides Additional Protection Against Basement Flooding When Power Goes Out
- Installs in sump basins along with a primary, 115V sump pump.
- Provides additional protection against basement flooding when the power goes out.
- Includes 12V pump, controller, alarm system, battery charger, float switch and battery box (primary sump pump not included - see Combo).
- Works with a deep-cycle battery but Basement Sentry brand batteries recommended (sold separately - See Basement Century STB75B Battery)..
- Basement Sentry Backup System Model STBB100.
Check StockSump Pump Submersible Pump 1/4 HP Sump Pump 1800 GPH Submersible Utility Pump-Black
- ★【The Specifications of This Sump Pump】 Power: 1/4 HP.
- Max. Flow: 1800 GPH, Solids Handling: 1/8 Inch, Cord Length: 10Feet, Outlet size: 1-1/4” FNPT & 3/4” GHT..
- ★This Sump Pump has a large 1-1/4 inch discharge for high capacity pumping. The built-in thermal overload can protection ensures the utility pump operates within spec for longer durability..
- ★This Sump Pump has a very good structure design, and it uses tough thermoplastic materials and a high-quality motor and other accessories, its process is strictly controlled to ensure reliable quality. It is durable, waterproof, rustproof, Corrosion resistant, and easy to move..
- ★This Sump Pump is great for clean or dirty water. The multiple applications include basement, crawl spaces, window wells, flat roofs, rain barrel, pools, pool cover, and more. And the sump pump can remove water level down to 1/4 inch. Just don't risk the water pump to be dry running..
- ★This Sump Pump has a one-year warranty(Attention: Defects due to improper use of the pump are not within the warranty) and NOTE: It is prohibited to use with no water. Please feel free to contact us if you have any questions about the product..
Check StockPumpSpy Silent Sewage or Sump Pump Check Valve 2-Inch Check Valve Stainless Clamps Fit 7-1/4 Gap in 2-Inch Schedule 40 PVC Spring-Loaded Flapper Quiet Check Valve Sump Pump Life Increase
- QUIET OPERATION: Our sump pump check valve has a unique spring-loaded flapper that helps eliminate the water hammer noise that standard check valves produce. The water hammer noise occurs when the discharged water slams the check valve flapper down. This silent check valve can bring a quiet operation to your sump pump..
- CLEAR VALVE BODY: This check valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational..
- INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 2" Schedule 40 pipe. Fits within a 7-1/4" gap..
- KEEP WATER OUT: This check valve is designed to keep pumped contents within the discharge pipe from falling back into the sump basin. A fully functional check valve can increase pump life expectancy by preventing contents from being pumped twice..
- ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevent costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working properly..
Check StockPumpSpy Threaded Quiet Sump Pump Check Valve with 100% Stainless Steel Clamps Included - Threads Directly into the Pump's 1-1/2" NPT Discharge to Connect it to a 1-1/2" Pipe - Model CV-150T
- ...arge to connect it to a 1-1/2" pipe and is engineered to allow for maximum flow from your sump pump. Works with any pump containing a 1-1/2" NPT discharge..
- UNIQUE SPRING-LOADED FLAPPER: The unique spring-loaded flapper on our sump pump check valve eliminates the water hammer noise of standard check valves for silent operation. No more sudden noises that disrupt your lifestyle or sleep. With this check valve, water hammer noise will be a nuisance of the past!.
- 100% STAINLESS STEEL HOSE CLAMPS: Our sump pump check valve threads directly into the pump's 1-1/2" NPT discharge to connect it to a 1-1/2" pipe and is engineered to allow for maximum flow from your sump pump. With durable ABS construction, you can have a system that'll last for a long time. The use of stainless steel hose clamps prevents rust and corrosion for a secure, leak-proof connection..
- PRE-DRILLED WEEP HOLE: The pre-drilled weep hole of our pump sump check valve eliminates the air lock that may occur in bottom suction pumps. Our “full-flow” check valves prevent the water that remains in the sump discharge pipe from falling ba....
Check StockVEVOR 1.5 HP Submersible Cast Iron and Steel Sump Pump, 6000 GPH Submersible Water Pump with Integrated Vertical Float Switch, for Basement Water Basin and Flooding Area
- 1.5 HP Power for Your Pump: Our submersible sump pump can lift water vertically up to a height of 33' and moves water up to 6000 gallons per hour. The 1100W efficient copper motor with thermal overload protection and 45dB low noise ensures secure and excellent performance. It is perfect to keep your basement dry during a heavy water flow like rain, snow melting, etc. Using your new sump pump is gonna be a blast!.
- Designed to Last: High-quality materials are guaranteed for high-quality results. The basement sump pump features a corrosion-proof cast iron frame with a rust-proof surface and high-quality stainless steel for long-lasting underwater use. It comes with an IPX8 waterproof rating and has achieved UL certification, so there is no need to worry about the quality..
- Hands-free Operation: Wouldn't you prefer to sit from the comfort of your couch and let your pump do its job? Well, now you can! Thanks to the vertical float switch, our heavy-duty sump pump will start working automatically when the water level rises above 8.7" and stop working when the water level is below 4.7". It is designed for energy-saving and labor-saving use in draining ap....
Check StockZoeller 508-0007 Aquanot 508 ProPak98 Preassembled Sump Pump System with Battery Back-Up
- Includes: Model 98 12-volt pump, Model 508 Aqua not, 12 Volt DC backup system with pump, check valve, float switch and piping.
- Comes fully assembled and ready to install in your clear water sump.
- Extra protection when the primary AC pump fails due to power outages.
- Fully solid state automatic 10A charger/controller with alarm, light indicator and warning system.
Check StockLittle Giant SPDK Sump Pump Discharge Hose Kit, 1-1/4” Hose – 1-1/2” & 1-1/4” Adaptors, 24-Feet
- SUMP PUMP HOSE: Sump Pump Discharge kit includes 1-1/4" and 1-1/2" NPT barbed adapters.
- DISCHARGE HOSE: It is Ideal for discharging water out of a basement sump pit to a safe location outside of the home. Kit includes 24' corrugated polyethylene hose.
- COMPATIBLE HOSE: It is compatible with sump pumps with 1-1/4 inch FNPT or 1-1/2 inch FNPT discharge. It includes ABS thread x barbed adapter and galvanized steel clamps. IT IS NOT COMPATIBLE WITH GARDEN HOSE FITTINGS.
- WATER PUMP HOSE DIMENSION: The sump pump discharge hose kit is of opening size 20 x 17 x 5.5 inches.
Check Stock