Top Water Pressure Solenoid Valve

uxcell Pulse Solenoid Valve G1/2 DC3.6V Copper Male Thread Valves with Filter

  • This solenoid valve is basic automated components that electromagnetically control fluids..
  • Flow Direction: Unidirectional (Follow the Arrow on Valve Body).
  • Solenoid type magnetic field makes the valve reach higher pressure, which greatly improves the flow of the passed medium..
  • Replacement solenoid valve for induction fittings. Replace the bad work solenoid valve for machine..
Check Stock

AOMAG® 1/8\ NPT DC 12V Electric Solenoid Valve 2 Way Water Air Valve Normally Closed

  • 【Service Media】: Air, Gas, Liquid, Water 【Material】Anodized Aluminum.
  • 【Valve Type】2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing..
  • 【Port Coil Voltage】 12V Port size: 1/8" Female..
  • 【Temperature Range】 23-176°F , Pressure Range : 115 PSI.
  • 【Feature】This solenoid valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). . Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
Check Stock

ZRDR Aquarium Co2 System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output

  • [Professional Factory] We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel. And we have adopted a stricter sampling system for product quality problems.
  • [High Security] Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • [Refine The Bubbles] Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • [Low Cost] You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • [Quality service] ZRDR is a customer-centric brand. Years of customer feedback make u....
Check Stock

HFS 110v Ac Electric Solenoid Valve Water Air Gas Fuels N/c - 1/2IN NPT Available 110V AC 1/2IN NPT

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/2IN NPT Available (12V DC 1/2IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/4IN NPT Available (12V DC 1/4IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

DIGITEN DC 12V 1/4 Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed

  • DC 12V 1/4" Quick connect Solenoid valve..
  • Working pressure:0.02-0.8Mpa. Its working temperature:32-158℉ (0-70℃)..
  • It will become hot because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60℃. If you want it works long hours, you should find a N/O normally open solenoid valve..
Check Stock

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01

  • The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
  • This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
  • Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
  • While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....
Check Stock

Kegco Premium Commercial Grade Dual Gauge Two Product CO2 Draft Beer Regulator

  • Dual stage construction & adjustable output pressure. Dual stage construction provides stable output pressure regardless of how much CO2 gas remains inside the CO2 cylinder, eliminating unpredictable catastrophes such as an end-of-tank-dump (EoTD). The output pressure is adjustable from 0-65 PSI based on customers’ different needs..
  • Modular manifold block design. Two manifold blocks are included. Each block comes with its own high-precision needle valve and can be operated independently. You may use one block for one aquarium or use both for two aquariums..
  • Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
  • Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
Check Stock

1/2\ Brass Electric Solenoid Valve,110v Ac Brass Electric Solenoid Valve for Water Air Gas Fuel Oil

  • High quality normally closed electric solenoid valve:Model:2W160-15.
  • Size:1/2 inch,Working temperature range: 23-176°F；Pressure range：0-145Psi.
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket..
  • Applicable use in many fields: Irrigation controls (garden, farm,etc.), liquid controls ( pipeline, artificial river etc. and air controls ( lab, factory, etc.).
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
Check Stock

Aquarium DIY CO2 Generator System Kit CO2 Generator System with Solenoid Valve Bubble Counter Check Bubble Diffuser Carbon Dioxide Reactor Kit for Plants Aquarium

  • ✪【Be made of aluminum alloy】It is strong, durable and efficient. Well-sealed caps and pipes, leak-proof, non-deformed, never loose. Professional pressure guage for pressure watching. Cheap, simple to create pure CO2 constantly by chemical reactions..
  • ✪【Solenoid valve】To control the on and off of CO2 generator system using with a timer(not included). Bubble counter with check valve: Flow-rate of CO2 gas indication device and prevent water flow back into the bottle..
  • ✪【Equipped with a safety valve】The pressure is greater than 4kg pressure will relief automatically, carbonated beverage bottle pressure is 8kg, safety is ensured..
  • ✪【The safety valve supports manual pressure relief】When the pressure is below 4kg, it can be manually relieved by pull the ring of the safety valve. It is very safe..
  • ✪【Come with a bubble diffuser】Refine the bubbles and make it easy to dissolve in water and be absorbed by plants. Inject to your aquarium with CO2 quickly and easily..
Check Stock