Top Water Sensing Meter

Megger MIT310-EN Insulation Tester, 1000 Megaohms Resistance, 250V, 500V, 1000V Test Voltage

• Insulation tester for testing insulation resistance, voltage, and continuity in electrical installations.
• Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
• Dual digital display with analog arc function to replicate response of analog meters.
• Measures insulation resistance from 0 to 1,000 megohms, voltage from 0 to 600V, and continuity from 0.01 to 100 ohms.
• Safety rated to European Standard EN61010-1 Category III, 600V and IP54 rated for protection against dust and splashing water.

Fluke 324 True RMS Clamp Meter

• Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms.
• True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform.
• Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit.
• Audible continuity sensor confirms that the circuit conducts electricity.
• Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.
• CAT IV 300V/CAT III 600 Volt safety rating.

Digital CO2 Carbon Dioxide IAQ Monitor Controller with Relay Function 4.5m Cable NDIR Sensing Probe for Green House Home, Office, Factory

• 【Smart Controlling】This controller has a built-in photo sensor that overrides the CO2 control and shuts off the CO2 device when it senses darkness.It helps you to Monitor & Controlling CO2 value in Greenhouse or residential..
• 【Control CO2 Generator】With minimum and maximum CO2 levels. In Plant Mode, when the minimum level is sensed, power is supplied to a CO2 generator or regulator via the output socket. When the maximum level is reached, the power is turned off. Opposite in Human Mode..
• 【Adjustable Altitude】The monitor can be used in different altitude. You may adjust the current altitude to get precise value..
• 【Extendable Sensing Probe】Display CO2 chart with adjustable time scale (week/day/hour/min/auto). Sensing probe cable is 4.5 meter long to extend your measure spot 4.5 meter away from display..
• 【High Accuracy】Accurate 2-Channel low drift NDIR CO2 measurement , programmable CO2 control value & zone value allows you to set desired CO2 level for different plants..

Megger 212159 Analog Hand-Crank Insulation Tester, 2,000 Megaohms Resistance, 100, 250, 500, 1000 V Test Voltage

• Insulation tester for measuring insulation resistance and voltage.
• Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
• Analog meter with manual range selection for flexibility of use.
• Guard terminal to eliminate surface current leakage.
• Safety rated to European Standard EN61010-1 Category II, 300V and Category I, 600V.

Jayron JR-HM016B LCD Wireless Digital Hour Meter Gauge Vibration Activated,Waterproof Design,for All Vibrating Machine,Air Compressor,Generator,Lawn Mower,Motorcycle,Chainsaw

• VIBRATION ACTIVATION----The wireless vibration activated hour meter tracks the number of hours you have placed on the machine by detecting the....
• HOUR METER----Vibration hour meter accumulative total running time TOT, total time cannot be reset.Timing range: 0-99999H, 0.1H accuracy.Recording....
• VIBRATION SENSITIVITY----There are two selectable sensitivity levels (low and high) for accurately sensing the vibration frequency of different....
• LOCK FUNCTION---- Hour meter includs lock function, which can prevent waste during transportation effectively. When the timer is locked, it is....

Hioki 3246-60 HiTester Pen-Sized Digital Multimeter with Flashlight, 42 Megaohms, 600V

• Digital multimeter measures voltage and resistance.
• Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform.
• Built-in flashlight illuminates dark work areas.
• Pen-sized meter fits in a shirt pocket when not in use.
• Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 600V, Category III installations up to 600V, and Category IV installations up to 300V.

KAIWEETS HT206A Clamp Meter Multimeter TRMS 4000 Counts, Auto-ranging Amp Voltage Tester with Backlight, Measures AC Current, AC/DC Voltage, Capacitance, Resistance, Diodes, Continuity

• [Auto-Ranging Clamp Meter]: The meter measures AC Current to 600 amp, AC and DC Voltage to 600 V, Resistance to 40MΩ and Capacitance to 4MF. Does not measure DC Current..
• [True-RMS Amp Meter]: The sensing meter accurately measures distorted waveforms and provides true readings when measuring linear or non-linear loads..
• [Advanced Functions]: Auto-off of inactivity after 15 minutes, Data Hold, MAX/MIN Reading, Low Battery Indicator and Continuity Loud Buzzer..
• [Two-Color Backlight and Work Light]: Two-color backlit LCD Display - When the voltage 003e 80V, the current 003e 3A, the LCD backlit screen turns orange to warn you, The LCD Backlit Screen and Work Light make it easy to use in a dark working area..
• [Suprior Safety and Service]: Standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service..

Kuled 10-led Wireless Motion Sensing Stick-on Anywhere Step LED Light Bar with Magnetic Strip Pure White 3-Pack

• Cabinet LED Light, Sensor LED light 80lm: the light will light up when you get within 3 meter of it and will go out 15 seconds after you walk out of....
• 3 pack Auto motion sensing LED light: 10 pcs bright white LED with super bright, long operating life, energy saving, and environmental friendly light..
• Please wait for 10 seconds to active the sensor for first time install the batteries..

Garmin Rally XC100, Single-sensing Power Meter, Compatible with SHIMANO SPD Cleats

• Designed for off-road use, superior pedal design installs like any other pedal and quickly transfers between bikes.
• compatible with SHIMANO SPD cleats (sold separately).
• Rally XC100 single-sensing power meter measures total power and cadence with the option to upgrade to a dual-sensing system.
• Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge cycling computers or the Garmin Connect app on your compatible smartphone.
• For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect app, with a compatible device, as well as platforms such as Strava and TrainingPeaks.
• With a compatible device, train indoors by connecting with the Tacx Training app and additional third-party platforms, including TrainerRoad and more.

TPI 135 Manual-Ranging, Average-Sensing Digital Multimeter with Protective Boot, 750VAC, 1000VDC, 10 Amp, 40 Megaohms, 20,000 Microfarads

• Digital multimeter measures voltage, current, resistance, and capacitance.
• Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform.
• Audible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuit’s diodes.
• Hold function keeps a reading on the LCD, even after the meter is disconnected.
• Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1,000V and Category III installations up to 600V.

XLUX Soil Moisture Meter, Plant Water Monitor, Soil Hygrometer Sensor for Gardening, Farming, Indoor and Outdoor Plants, No Batteries Required

• Reliable and accurate: Sensing probe ensures accurate and instant testing results, matching for both indoor or outdoor use..
• Easy to read: Large and clear dial, including ten scales, plug and read..
• How to use: Simply insert the moisture meter into soil and you'll get the test result instantly. Help your plants grow healthy and strong..
• Less hurts: Single probe, less hurts to the roots, doesn't dig up too much soil after test..
• Important tips: 1. Do not use it to test very hard soil 2. Never use it to test water or other liquid. Designed for testing soil only. 3. After use, please wipe clean the probe..

Precision Sensors ProFinder 7000+ Professional Stud Finder