Top Water Solenoid

Beduan Brass Electric Solenoid Valve 1/2 12V Air Valve Normally Colsed for Water Air Gas Fuel Oil

  • Durable brass construction and a quality copper solenoid. And high quality copper coil, NOT aluminium coil..
  • Temperature Range: 41-185°F , Working Pressure: Water/Oil 0-0.5 Mpa.
  • High quality normally closed electric solenoid valve for air ,water or oil..
Check Stock

DIGITEN Water Flow Control Meter LCD Display Controller+G1/2\ Water Hall Sensor Flow Meter Flowmeter Counter 1-30L/min+G1/2\ Solenoid Valve Normally Closed N/C+DC 12V Power Adapter

  • ...reen & Monitor Flow Rate】: Support reading with Liter or Gallon unit, LPM/GPM switchable. DFC15 will display the flow rate(the REAL-TIME volume of liquid which passes per minute), the flow total volume and sensed temperature clearly..
  • ★【Quantitative Control & Alarm Function】: The controller will turn off the solenoid valve automatically when flow reach to the setting value you desire, it's easy to install and control. It can automatically stop water filling into your concrete mixer. When the total amount reaches the setting value, the controller will alarm..
  • ★【Work with All Hall Effect Flow Sensor】: It can work with various different flow sensors through adjust the K value. High quality, come with temperature sensor, it can measure liquid temperature..
  • ★【Wide Applications】: Swimming pool, water dispenser, coffee machine, drip irrigation system, beer brewing, etc. For example, if you want 5 liters of water, you can set up 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller will control the solenoid valve to close it, the water flow automatically stops, and you just get 5 liters of water. Please select a suitable flow meter. An oil flow meter is required for liquids other than wat....
Check Stock

HFS 110v Ac Electric Solenoid Valve Water Air Gas Fuels N/c - 1/2IN NPT Available 110V AC 1/2IN NPT

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016" * 2.44"), thread diameter: 20mm (0.787"), interface pipe diameter: 1 / 2" NPT thread, flow diameter: 16mm (0.63").
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 1.2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

Beduan 2 Way Normally Closed DC 12V Electric Solenoid Air Valve 1/8\ NPT

  • 【Service Media/Material】 Air, Gas, Liquid, Water./ Anodized Aluminum.
  • 【Port Coil Voltage】 12V Port size: 1/8" Female inlet/outlet port..
  • 【Temperature/ Pressure Range】 23-176°F, Pressure Range:115 PSI..
  • 【Selenoid Valve Type】 2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing..
  • 【Feature】This solenoid water valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/2IN NPT Available (12V DC 1/2IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 102mm*62mm (4.016 '' * 2.44 ''), thread diameter: 20mm (0.787 ''), interface pipe diameter: 1 / 2 '' NPT thread, flow diameter: 16mm (0.63 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

HFS (R) 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c - 1/4IN NPT Available (12V DC 1/4IN NPT)

  • [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve.
  • [SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '').
  • [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use..
  • [WIDE APPLICATION]: Applicable temperature: - 5 ℃ ~ 80 ℃,Working pressure: water, air: 0 ~ 7kgf/cm2, oil: 0 ~ 5kgf/cm2,Working environment: air, water, oil and gas.
  • [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working..
Check Stock

DIGITEN DC 12V 1/4 Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed

  • DC 12V 1/4" Quick connect Solenoid valve..
  • Working pressure:0.02-0.8Mpa. Its working temperature:32-158℉ (0-70℃)..
  • It will become hot because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60℃. If you want it works long hours, you should find a N/O normally open solenoid valve..
Check Stock

Aquarium Choice 6 Pieces CO2 DIY Reactor Bottle Cap Fish Tank DIY Quick Twist co2 Bottle Cap with 118 INCH Long Hoses

  • 【Support MORE raw materials】2.3L capacity and thickened wall cylinder, supporting 400g citric acid + 400g baking soda + 600ml water. Other....
  • 【304 stainless steel】Corrosion and high pressure resistant 304 stainless steel cylinder with a pressure load of 180kg/cm² (2560 psi). Safer to....
  • 【High quality solenoid valve】The bubble counter is integrated with the solenoid valve and has a built-in check valve. And the solenoid bubble....
  • 【Attention】This set contains almost all the necessary accessories, only the reaction raw materials need to be prepared by yourself..
  • 【Most parts are replaceable】Quality inspection one by one, rather than random inspection! We are serious about quality control and buyer....
Check Stock

Engine Wire Loom Wiring Harness for GY6 125cc 150cc 250cc Scooter Quad Bike ATV Buggy Go Kart Dune

  • Starter Solenoid Relay + Starter Motor for GY6 4-Stroke ATV Dirt Bikes Pit Bike Scooters Go Kart Moped Quad 4 Wheelers Buggys 50cc 150cc 200cc 250cc Engine. Compatible with Tao tao SUNL Coolster Baja Roketa Icebear Jonway GY6 engine parts replacement..
  • Starter Solenoid Relay for 4-Stroke GY6 Engine 50cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Dne Buggys Quad 4 Wheelers Pit Bike Moped Roketa SSR Taotao Sunl Coolster..
  • Motor Starter for GY6 125cc 150cc Scooter ATV Moped Go Karts Quad 4 Wheelers Taotao SUNL Baja Icebear Roketa Jonway.
  • GY6 Motor Starter For 152QMI 157QMJ engine motor. 12V / 9 Teeth / CW Rotation..
  • Starter Solenoid Relay,Starter Relay Solenoid also works with Honda Clones 50cc, 70cc, 110cc, 125cc, 250cc etc. GY6 Starter Solenoid Relay Replace oem part number: 35850-286-007,35850-286-027,35850-286-017,35850-375-000. High cranking power,reduce startup switch electric current.
  • High quality material,efficient and durable..
  • 4 Stroke Engine Parts GY6 150cc starter motor may also know as 150cc motor,150cc scooter motor,4 wheeler motor,starter motor motorcycle,gy6 starter motor,150cc gy6 starter motor,50cc starter motor,150cc starter motor,125cc starter motor,moped starter motor,scooter starter motor,go kart starter motor,ATV starter motor. ....
Check Stock

Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01

  • The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
  • This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
  • Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
  • While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....
Check Stock

Starter Solenoid Relay + Starter Motor for 4-Stroke GY6 Engine 50cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Compatible with Taotao SUNL Coolster Baja Roketa 4 Wheelers Moped by BOOTOP

  • Starter Solenoid Relay + Starter Motor for GY6 4-Stroke ATV Dirt Bikes Pit Bike Scooters Go Kart Moped Quad 4 Wheelers Buggys 50cc 150cc 200cc 250cc Engine. Compatible with Tao tao SUNL Coolster Baja Roketa Icebear Jonway GY6 engine parts replacement..
  • Starter Solenoid Relay for 4-Stroke GY6 Engine 50cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Dne Buggys Quad 4 Wheelers Pit Bike Moped Roketa SSR Taotao Sunl Coolster..
  • Motor Starter for GY6 125cc 150cc Scooter ATV Moped Go Karts Quad 4 Wheelers Taotao SUNL Baja Icebear Roketa Jonway.
  • GY6 Motor Starter For 152QMI 157QMJ engine motor. 12V / 9 Teeth / CW Rotation..
  • Starter Solenoid Relay,Starter Relay Solenoid also works with Honda Clones 50cc, 70cc, 110cc, 125cc, 250cc etc. GY6 Starter Solenoid Relay Replace oem part number: 35850-286-007,35850-286-027,35850-286-017,35850-375-000. High cranking power,reduce startup switch electric current.
  • High quality material,efficient and durable..
  • 4 Stroke Engine Parts GY6 150cc starter motor may also know as 150cc motor,150cc scooter motor,4 wheeler motor,starter motor motorcycle,gy6 starter motor,150cc gy6 starter motor,50cc starter motor,150cc starter motor,125cc starter motor,moped starter motor,scooter starter motor,go kart starter motor,ATV starter motor. ....
Check Stock

Transgo SK 4L60E Shift Kit - 4L60E 1993-ON

  • Note: This part is a refurbished part,If you have to replace the solenoids or valve body, or reprogram the system, always perform the adaptive relearn. If you don’t, you could run into harsh or erratic shifting..
  • Fitment:Compatible with Fits all GM Products with the 4L60E Model Automatic Transmission 2003-On.
  • Package List:This kit includes everything pictured: One (1) A Shift Solenoid One (1) B Shift Solenoid One (1) 3-2 Downshift Solenoid One (1) EPC (Pressure Control) Solenoid One (1) TCC/PWM Solenoid.
Check Stock