Top Waveform Generator

RIGOL DG2102 Function/Arbitrary Waveform Generator,100MHz 2 Channels

  • SiFi (Signal Fidelity) for 100% waveform replication.
  • 2Mpts or 8Mpts/CH(std.), 16Mpts/CH (opt.) arbitrary waveform length.
  • Standard 2 full functional independent channels.
  • ±1ppm frequency stability, -125dBc/Hz phase noise, 200ps low jitter.
  • Built-in 7 digits/s counter up to 200MHz.
  • Intuitive arbitrary waveform editing software.
  • Full modulation supported: AM, FM, PM, ASK, FSK, PSK and PWM.
Check Stock

Hantek Professional Automotive Oscilloscope 2D82AUTO, 4 in 1 Handheld Oscilloscope Multimeter, Digital USB Oscilloscope with 2 Channels 80 MHz Bandwidth, Oscilloscope Kit 2D82 III

  • 4CH oscilloscope,with 1CH Arbitary/function waveform generator,independent keys of oscilloscope and waveform generator which is easy to operate at the same time..
  • 250MHz bandwidth, minimum measurement range 500μV /div,1GS/s sample rate,advanced digital trigger system,high trigger sensitivity..
  • The high-resolution 7-inch color LCD screen (800x480 pixels),provides more than 14 trigger functions: edge, overtime, pulse, pattern, interval, etc..
  • Function/arbitrary signal generator25MHz,12BitS resolution, 200MHz DDS, ARB/square wave/sine wave/triangular wave/trapezoidal wave/impulse wave/DC etc.,easy to simulate the sensor..
  • Before use,please read the instructions enclosed with the product.If you have any questions about the product, please contact us promptly.We will provide you with 100% satisfaction guarantee and perfect service..
Check Stock

UNI-T MSO3000E Series Digital Oscilloscopes 250MHZ 2CH, 50MHz Built-in Waveform Generator

  • Product 1: UNI-T Arbitrary Waveform Generator UTG932. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-30MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • Product 2: 150MHz bandwidth. 2 channels, wide vertical range: 1mV/div to 20V/div. Automatic measurement of 32 waveform parameters. New interface style. Widescreen display. 7 inches TFT LCD WVGA, RGB. 800×480 resolution. Multilingual menu available..
  • Product 2: 1GSa/s sampling rate. Storage of waveform setups and interface waveform and setup reproduction. Unique waveform record and replay function. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. USB drive system software upgrade..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

FNIRSI 1014D Digital Storage Oscilloscope 100MHz Dual Channel Oscilloscope Signal Generator

  • Built in DDS signal generator, support 12 kinds of function signal. Industry's original 【Capture output signal】 function，can store up to 1000 capture signals. Targeted high intelligent decoding algorithm, the encoder life is infinite.
  • Intelligent anti-burn，1X Can withstand up to 400V withstand voltage. 100MHz analog bandwidth @ 1GSa/s sampling rate（1X = 5MHz，10X = 100MHz）. Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast.
  • High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 0 ~ 400V，100X can measure 0 ~ 4000V. Up to 12 parameters measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period.
  • Cursor measurement function, it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic). At any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO.
  • One-button waveform storage and screenshot. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zoomin....
Check Stock

UNI-T MSO3000E Series Digital Oscilloscopes 4CH, 50MHz Built-in Waveform Generator (MSO3254E 250MHz 4CH)

  • Product 1: UNI-T Arbitrary Waveform Generator UTG962. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-60MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • Product 2: 150MHz bandwidth. 2 channels, wide vertical range: 1mV/div to 20V/div. Automatic measurement of 32 waveform parameters. New interface style. Widescreen display. 7 inches TFT LCD WVGA, RGB. 800×480 resolution. Multilingual menu available..
  • Product 2: 1GSa/s sampling rate. Storage of waveform setups and interface waveform and setup reproduction. Unique waveform record and replay function. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. USB drive system software upgrade..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

1HZ-500KHZ DDS Functional Signal Generator, Seesii DDS Function Low Frequency Signal Generator Sine/Triangle/Square/Sawtooth Waveform

  • 1HZ-500KHZ DDS signal generator is small but has many functions, easy to operate and carry. The power supply can be either AC/DC adaptor or a battery..
  • It can be used with oscilloscope to test and debug electronic circuit, the frequency response of audio amplifier and impulse response,It also can calibrate the sweep time factor of oscilloscope..
  • The square waveform is suitable for oscilloscope attenuator and the adjustment of probe impulse response..
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave..
  • This functional signal generator can test many kinds of wave forms such as: sine, square, triangle, positive and negative sawtooth waveform. It is especially designed for those professional worker..
Check Stock

Loto OSC482X, USB Oscilloscope + Signal Generator + Logic Analyzer + Data Logger, 4 in 1, 50M S/s, 8~13 bit Vertical Resolution (PC Oscilloscope + Signal Generator + Logic Analyzer, OSC482X)

  • Hand-held portable || USB 2.0, USB powered || AC/DC coupling || Trigger || FFT || Math || X-Y Plot || Interpolation || Acquisition Modes.
  • Extension port for DIY || Optional modules (logic analyzer/signal generator//DIY modules... ) || Size: 15.25 x 9.32 x 2.31 cm.
  • Waveform recording and playback || Serial bus decoding || Buffer waveform thumbnail || Waveform comparison reference || Over-voltage warning..
  • Zoom in/out || Mouse wheel control || Auto measurement & cursor/ruler measurement || Annotations || Auto set || Save as image || Save as file || Print..
  • 72 hours data logger || Vertical resolution: 8~13 bit (HiRes mode) || Waveform persistence..
Check Stock

Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator

  • 2 Channel Digital Oscilloscope + Arbitrary Waveform/Function Generator + Synchronizing Signal + External Trigger..
  • 7 inch 64 k color LCD display, Resolution 800 x 480..
  • 32 kinds of Automotive measurement with FFT function..
  • 25 MHz Arbitrary waveform output (Sine wave up to 75MHz)..
  • Powerful trigger function: Video, Edge, Pluse Width, Slope, Overtime, Alternate Trigger..
Check Stock

Micsig Digital Tablet Storage Oscilloscope 100MHz 4CH TO1104

  • 4 analog channels, 1 arbitrary waveform generator, 1GSa/s sampling rate, 250MHz bandwidth.
  • Over 20 functions, including pass/fail test, trigger, dynamic cursor tracking, waveform record and replay.
  • Heat-resistant and scratch-proof compact case, powered by connecting to computer USB ports.
  • Compatible with Win 7/8/10, Android via H-scope/Openscope, Linux via Openhantek, and OSX through virtual box/machine.
  • Provides development library DLL with Labview/VC/VB/QT development examples.
Check Stock

UNI-T UTG962 + UTD2152CEX, Function Generator and Oscilloscope Kit

  • MSO3000E not only has 4 analog channels, but also provides 16 digital channels to accurately capture and display digital level signals and bus logic status.
  • Built-in dual-channel 50MHz arbitrary waveform generator function, integrating oscilloscope, logic analyzer and signal source into one, bringing you a more efficient test experience..
  • Rich trigger function to meet more test conditions, and the time base of each channel is independently adjustable, which is convenient for users to observe four signals with large frequency differences at the same time..
  • It has a fast numeric keyboard to input the required data quickly and effectively, and it has an independent 4-window display to bring a more efficient user experience..
  • 70Mpts storage depth per channel, while observing four channels of signals at the same time, it can maintain the highest sampling rate for a longer period of time, without losing any waveform changes, and can also analyze waveform details.
Check Stock

Combo 7 in 1 Package of Hantek 1008C Automotive Diagnostics oscilloscope (Combo 7 Package)

  • 4 analog channels, 1 arbitrary waveform generator, 1GSa/s sampling rate, 250MHz bandwidth.
  • Over 20 functions, including pass/fail test, trigger, dynamic cursor tracking, waveform record and replay.
  • Heat-resistant and scratch-proof compact case, powered by connecting to computer USB ports.
  • Compatible with Win 7/8/10, Android via H-scope/Openscope, Linux via Openhantek, and OSX through virtual box/machine.
  • Provides development library DLL with Labview/VC/VB/QT development examples.
Check Stock

Professional Upgraded DDS Signal Generator Counter, Seesii 60MHz LCD Display High Precision 200MSa/s Dual-Channel Arbitray Waveform Function Generator Frequency Meter

  • 【Upgraded Signal Stability】Seesii Dual-channel DDS arbitrary waveform generator adopts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened..
  • 【Storage And Custom】 You can store 99 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 60MHz. 200MSa/s sampling rate. It has 60 positions for saving user-defined waveform. In addition, it has a very good software package that allows you to create your own waves and frequency combinations. After you save them, you can disconnect the unit from the computer and use them for any applications you wish..
  • 【High Precise】 Using Dual-channel DDS signal and TTL electric level output to generate precise, stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Sawtooth wave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters.Duty cycle of each channel can be adjusted separately. Precision can be 0.1%..
  • 【Frequency Meter】With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measureme....
Check Stock