Top Waveguide Tee - BuyWiseBest.com

JBL 306P MkII Powered 6.5" Two-Way Studio Monitor (Pair) with (2) IP-M Isolation Pad (Medium, Single) & (2) 20' XLR Cable Bundle

Bundle Includes: Two JBL 306P MkII Powered 6-inch Two-Way Studio Monitors.
High-quality: JBL 306P MkII has been equipped with acclaimed 3 Series transducers that now perform even better. Hear deep, accurate, and tightly controlled bass, thanks to a long-throw 6.5-inch woofer and the patented JBL Slip Stream low-frequency port.
Dynamic Range: With 112 watts of total power, the dual, integrated Class-D power amplifiers, custom-designed by JBL for each transducer, give you a generous dynamic range for any project.
Powerful Drivers: From music production and podcasting to cinematic sound design or daily vlogging, enjoy the output and power you need to hear exceptional detail at any volume - even at peak SPL. Simply plug in, power on, and start creating.
Image Control Waveguide: Reveal impressive detail, ambience, and depth in your mixes with JBL 3 Series’ groundbreaking Image Control Waveguide.

...4 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M115-8A x 2.

.... JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design.
High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M112-8. Input Connectors : Neutrik Speakon NL-4 (x1).

【Easy to Cut and Fit】: Size 130mm by 130mm will fit over 99% of all microwaves.Use old part as a template to cut out new waveguide.It is easy to trace and cut out. Simple replacement using the old cover as a model when marking the part, and then simply using the scissors to cut the new cover to fit.so it is suitable for most.
【Perfect Home Accessories】: The oven mica sheet is a nice home accessory to help repair your home appliance, extend the life of your microwave, hair-dryer, toaster, etc. It stops moisture and food particles getting into the delicate electrical parts of the microwave. Oven repair parts, play a protective role..
【High Quality Material】: Made of quality mica paper with silicone resin by gluing temperature and pressed, you can use it for a long time,high insulation temperature, it will not generate an electromagnetic reaction due to the action of the microwave..
【Wide Application】:This mica plates sheet is widely applied for home appliances such as electric hair-dryer, toaster, microwave oven, warmer etc..
Using them can extend the life of your microwave oven.
【Package Included】: you will receive 10 pieces mica plates , enough quantity can meet your daily needs.note:microwave oven waveguide cover is universal for....

Perfect combination of style and performance.
The integrated WaveGuide focuses the high frequency sound for dynamic, true-to-life reproduction.
PREMIUM PERFORMANCE: The 1” soft dome tweeter provides smooth, refined high frequencies..
Wood grain accents give a handcrafted, natural look..

TNF tweeter with Poron suspension for smoother sound.
RMS Output Power: 25W, Max Power Handling: 120W.
Urethane tweeter plate with waveguide for improved horizontal directivity and sound image.
Ultra-rigid MDF construction and non-parallel side panels for very little vibration and neutrality.

TNF tweeter with Poron suspension for smoother sound.
Urethane tweeter plate with waveguide for improved horizontal directivity and sound image.
Ultra-rigid MDF construction and non-parallel side panels for very little vibration and neutrality.