Top Wear Gauge Brake Pad Tool

Dorman 20744 Brake Pedal Pad Compatible with Select Acura / Honda Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20753 Brake Pedal Pad Compatible with Select Ford / Lincoln / Mercury Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20729 Brake And Clutch Pedal Pad Compatible with Select Ford Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

ARES 70924-8-Piece Brake Pad Gauge Tool Set 20-Gauge Sheet Metal - Corrosion Resistant High Visibility Powder Coat Finish

  • SET INCLUDES: This Brake Gauge Tool Set includes eight brake gauges designed to help identify if a vehicle has sufficient brake lining in the following metric/SAE sizes: 2mm (0.0787 inches), 3mm (0.1181 inches), 4mm (0.1575 inches), 5mm (0.1969 inches), 6mm (0.2362 inches), 8mm (0.3150 inches), 10mm (0.3937 inches), and 12mm (0.4724 inches)..
  • QUALITY: These brake gauge tools are constructed of 20-gauge sheet metal with a red, yellow, or green durable powder coat for easy identification of brake lining that needs to be replaced and are held together by a heavy-duty rivet, so you'll never have to search for a piece of this handy set..
  • APPLICATION: This brake gauge set can be used to quickly and easily identify brake lining that needs to be replaced in any vehicle, from light cars and trucks to heavy duty transportation vehicles. The green brake gauges indicate that the brake lining is in good condition. The yellow indicate that service may be needed, and the red indicate that the brake pads or shoes should be changed immediately..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 8-Piece Brake Gauge Tool Set, simply conta....
Check Stock

Dorman 20723 Brake And Clutch Pedal Pad Compatible with Select Lexus / Toyota Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 20780 Brake And Clutch Pedal Pad Compatible with Select Dodge / Jeep / Ram Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Milton 942 8-Piece Manual Brake Pad Gauge Metric/SAE Tool Set, Easy to Read Color Coded - 2mm to 12mm

  • Usable Range:This brake gauge set can be used to both disc and drum style brake pads on any type of vehicle from passenger cars and trucks to heavy duty transportation..
  • Blade Sizes：This Brake Gauge Tool Set includes eight brake，each gauge blade has both Metric & SAE，Three green (0.4724, 0.3937, 0.3150 inch & 12, 10, 8 mm ), Three yellow (0.2362, 0.1969, 0.1575 inch & 6, 5, 4 mm ), and Two red (0.1181, 0.0787 inch & 3, 2 mm)..
  • Quality：This brake meter tool comes with a durable powder coating in three colors for easily identify the brake liner that needs to be replaced and hold it together with heavy duty rivets..
  • Color Function：The green brake gauges indicate that the brake lining is in good condition. The yellow indicate that service may be needed, and the red indicate that the brake pads or shoes should be changed immediately..
  • Exquisite Packaging：With an exclusive design of the exquisite paper card, easy to hang, as a gift to customers in need..
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • 【Professional Digital Caster Camber Gauge】The camber gauge is used to measure the camber and caster angles of wheels or brake discs.Camber gauge allows you to restore the strut to original camber position after disassembling and reassembling the suspension,or to check the camber change before reinstalling. It can help you adjust camber and caster to maintain correct wheel alignment, reduce tire wear, and increase the speed of your car. It can also be used to adjust the levers of the rear wheels..
  • 【Easy-to-read Digital LCD Display & ±90° Wide Range Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the ....
Check Stock

SAFELIFE Digital Tire Tread Depth Gauge, 3 Modes-Fractional Inch, Decimal Inch and Millimeter, Zeroable Tire Tread Depth Gauge for Motorcycles,Cars,Trucks,Vans,SUV Accurate Tyre Tread Depth Gauge

  • 3 MODES READABLE RANGE: Accuracy tire tread depth gauge has One-touch switch for Metric MM and SAE with option of decimal or fractional inch interchange. Readable range - able to show tread depth from 0-25.4mm in metric or 0-1-inch in sae (32/32-inch)..
  • ZEROABLE and BATTERY SAVE: Depth Gauge can be zeroed at any position for easy adjustment and precision readings. to preserve the included 3V CR2032 battery, the gauge will automatically shut off after 5 minutes of inactivity..
  • LARGE LCD DISPLAY: Digital screen makes tire depth gauge easier to read. The depth bar with scale, also can be meansuread the tire depth when the digital tire tread depth gauge's battery has run down..
  • WIDELY USAGE: Tread depth gauge suitable for all vehicle tires, truck, car, moto, pick-up measuring tread depth and brake pad wear.
  • minimizing tire surface damage and car accidents. Compact and portable design fits easily into a pocket or tool pouch..
  • ENSURE YOUR SAFTY:Normaly Driving Least 1.6mm. Always High Speed Condition Least 3mm. Driving in Rainy and Snowy Weather Least 4mm.Always be Safe.
Check Stock

Kent. 20 Girls Trouble Aqua/black Bicycle

  • 2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry....
  • Size: the road brake pad is about 50 mm/ 1.97 inch in length.
  • Each piece has a nut and a spacer, it's easy to remove and install with the tool.
  • V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
  • Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
  • Each pair c brake pad has left and right part, without front....
  • Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
  • Come with the lightweight tool for easy installation.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

VEVOR Sheet Metal Brake 36 In. Metal Bender Brake 910 mm Length Portable Metal Bender 0-90 Degrees & WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear

  • ...d your metal sheets, with its extraordinary bending performance making itself quite a necessary tool in factories and workshops..
  • Product 1: 0-90° Flexible Bending: You can adjust to a specific angle between 0° and 90° according to your work needs. The metal bender brake is ideal for bending heavy foils and light gauge metals. Bending material gauge up to 20 gauge mild steel & 14 gauge aluminum..
  • Product 1: Two C-Shaped Clamps & Knobs: Effortless bending can be achieved through adjusting two lengthen handles. Pre-drilled touting holes allow mounting on the bench. And two C-shaped clamps are provided.
  • you can fix the brake with clamps conveniently..
  • Product 1: Heavy Steel Construction: The sheet metal bending brake is well-built with premium steel. Solid construction will stand for many years of heavy use. And it's compact and portable.
  • you can easily bring it from home to your job site..
  • Product 2: Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute.
  • Product 2: Attack up to 20 gauge stainless steel and 18 gauge sheet metal.
  • Product 2: Lightweight design limits fatigue during operation.
  • Product 2: Utilizes a powerful 4-amp motor, curling the metal as it cuts.
Check Stock