Top Wear resistant Tap Set

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
  • total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

Drillco 2000R Series 20 Piece High-Speed Steel Tap and Carbon Steel Round Adjustable Die Set, Uncoated (Bright) Finish, UNC Thread

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Comes in an attractive, hand made, wooden case.
  • Set includes : 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 3/4″.
  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Comes with 1-1/2-inches round die stock, #7 to 1/2 adjustable tap wrench, #12 to 1/2-inches t-handle tap wrench, and 1 screwdriver.
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

uxcell Thread Milling Tap 8-32 UNC, M42 HSS (High Speed Steel) Uncoated 3 Straight Flutes Machine Screw Threading Tap 2B Tolerance Grade

  • Tap Size: M1.8 x 0.35 metric thread, H2 thread tolerance grade. Straight flute design, downward chip removal, fast tapping with accuracy. Titanium coating can improve wear resistance, corrosion resistance and rust protection..
  • Applications: Suitable for processing through holes or shallow blind holes. Perfect for tapping stainless steel, copper, aluminum, etc.. Micro taps are mainly used for watches and clocks, and drilling materials in low hardness, such as wood, plastic and soft metals..
  • Cobalt High Speed Steel Tool: High speed steel (HSS) tool with cobalt has higher hardness and precision, better wear resistance and toughness, higher heat resistance. It is made by adding 5%-8% cobalt to the general-purpose high-speed steel..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Recommended feed rate: General steel: 6-15m/min.
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

JEFE HEX 5/16\ Hex Shank Titanium HSS Twist Drill Bits, 135 Degree Easy Cut Split Point Drill Bit for Steel, Copper, Aluminum, Zinc Alloy, Wood and Plastics, Packed in a Double Blister.

  • ... fits for electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine..
  • 【Premium HSS】Made of premium high speed steel and titanium coating, the impact drill bit set features sharp and fast execution and better precision to retain strength and efficiency, the hex tail has good impact resistance and fracture toughness. Rust-proof and corrosion-resistant, more wear-resistant and long lasting..
  • 【Multiple Application】The drill and tap set with high hardness, can easily work on wood, PVC, plastic, aluminum, copper and metal sheet etc. These metal drill bits suitable for drilling, tapping, deburring and countering holes..
  • 【High efficiency】 All in one, no need to drill a hole with a drill bit, and then knock it out with other tools, which improve work efficiency and greatly save a lot of time and trouble. Ideal for DIY projects, general building/engineering using and household maintenance and repair..
Check Stock