Top Wedge Anchor Screws

Worldity 200Pcs Self Drilling Drywall Anchors with Screws, Drywall Anchors Tapping Screw Kit, No Drill or Holes in Wall, Self-Drilling Drywall Anchors for Fixing Picture, Cabinet, TV Shelf -70lb

  • PREMIUM MATERIAL: Our drywall anchor kit is made of stainless steel, rust proof, moisture-proof, harder than other materials, which can be used for a long time. Its maximum hanging weight is 70 pounds. Heavy duty drywall anchor screws provide you a new style of wall hanging home installation tool..
  • EXQUISITE DESIGN: These drywall self-drilling anchors with screws are perfectly matched. After the drywall anchor is inserted, it is divided into two parts to better fix on the wall. The drywall anchors screw’s flat shape design, leaves only a small gap in the drywall when you remove it, convenient for you to repair later..
  • EASY TO INSTALL: Without using a hand drill to drill holes,only use a hammer to drive the ribbed anchors into the wall, then insert screws, and finally tighten the screws with a screwdriver until they are fixed.It can be completed within 30 seconds, improving work efficiency..
  • WIDELY USED: Very suitable for fixing curtains, home pictures hanging, closets, clapboard brackets and and TV wall brackets ect. Especially for apartment dwellers and anyone who rents (or manages rentals) to hang your art and pictures ....
Check Stock

H2o Kayaks Anchor Trolley Kit (Well Nut)

  • 4–pad eyes with 8 stainless steel screws and nuts and 8 rivets..
  • 1–3" Anchor Cleats with 2 stainless steel Screws and 2 stainless steel nuts..
  • 2–stainless steel Anchor Pulleys with nylon sheave..
  • 30 Feet (9 metres)–Braid 6 mm Trolley Line Instruction are included..
Check Stock

YakGear Deluxe Anchor Trolley Kit

  • 4–pad eyes with 8 stainless steel screws and nuts and 8 rivets..
  • 1–3" Anchor Cleats with 2 stainless steel Screws and 2 stainless steel nuts..
  • 2–stainless steel Anchor Pulleys with nylon sheave..
  • 30 Feet (9 metres)–Braid 6 mm Trolley Line Instruction are included..
Check Stock

Bill Premium Drywall Anchors with Wall Screws - Wall Anchors and Screw Kit - Set of 260 Pcs - Wall Hanging Kit - Assorted Plastic Anchors and Mounting Screws for Concrete Stucco Dry - Shelf Anchors

  • MADE IN EUROPE - PREMIUM QUALITY ANCHORS AND SCREW KIT: This screw kit will be a convenient box with 6 different drywall anchors and screws that can meet all kinds of needs, different sizes and styles to decorate your home. Anchors and screws kit is packed conveniently in a durable plastic case for your use and storage. The box also can be used for storage..
  • HIGH QUALITY AND ECO-FRIENDLY DRYWALL ANCHORS AND SCREWS: Plastic anchors are made of eco-friendly material, very durable and not easy to break. Screws are produced in accordance with international standards and are specially zinc coated to increase their durability. They are made of high quality steel that offers strong and good corrosion resistance in poor environments such as high temperature, cold weather and high humidity areas..
  • HOW TO USE: Drill a hole (depth and diameter in sync with the anchor) with an electric hammer drill, and then insert the anchor through the hole gently. Finally twist the self-tapping screw clockwise with a hammer or screwdriver. Ribs on both side of the anchor serve the function of stabilizing anchor tightly in the wall when twisting the screw in. At the same time, the split of anchor would expand to create a snug fit into the wall. So this could provide more holding....
Check Stock

Malta Dynamics Reusable Parapet Anchor for Temporary Fall Arrest Anchorage, Fits Parapet Walls from 2.36” to 14.1” Thick, No Installation Tools Required, Black

  • Reusable Parapet Anchor: This reusable parapet anchor is specifically designed to be used on flat roofs that are surrounded by a parapet wall with a minimum wall thickness 2.36". Maximum wall thickness 14.1”. Overall length 25.5”. Overall height 14.25". 9” minimum wall height ..
  • Non-Penetrating Design: Designed to prevent parapet wall penetration, this anchor features rubber protective pads to further eliminate damage to the parapet wall. Dual tightening handles for even force distribution.
  • protective pads eliminate damage during install.
  • Strong & Durable: Meets the standards of OSHA and ANSI Z359.18-2017 Type A. Manufactured with one zinc plated steel D-Ring, this anchor’s body is composed of alloy steel with zinc plated steel screws. Intended to use as part of a personal fall arrest system, it has a 130-310lbs weight capacity range..
  • Easy To Install: No installation tools are required for this parapet wall roof anchor. With its dual tightening handles for even force distribution, this anchor is fully adjustable .Main body: Alloy Steel. D-ring: Zinc Plated Steel. Set Screws: Zinc Plated Steel..
  • Let Us Help Protect You: At Malta Dynamics we have more than 140 years combined developing fall protection gear, we know a good....
Check Stock

Hard-to-Find Fastener 014973238124 Double Expansion Shields, 5/8, Piece-10

  • Product Name: Airplane Expansion Tube Anchor.
  • Package Content: 10 x Airplane Expansion Tube Anchor , 10 x Screws.
  • Plastic Anchor Size: 32 x 50 x 14mm/1.3" x 2" x 0.55"(L*W*T).
  • Screw SIze: 50 x 8mm/2" x 0.31"(L*Head Dia).
Check Stock

Folke & Vise Klubben Vol.10

  • Ultra strong and prevents wires from slipping out. The trellis' will sturdily hold the wire in place. The trellis has extreme pulling force.
  • Pack of 10 to be used with non coated wire. The anchor vise is compatible with bare and galvanized wire.
  • To be used with 8~11 Gauge wire (0.12"~0.16").
  • Each anchor vise measures 2.4 x 1.2 inches and weighs 1 ounce. The metal vise is durable, lightweight yet super strong.
  • 20 screws and 4 fence insulators are included in the package. The screws creates resistance while tightening the wire.
Check Stock

VEVOR Standoff Post Base 4 x 6\(Inner Size:3.74 x 5.12\) 10 PCS Stainless Steel Adjustable Post Base Adjustable Post Anchor with Fiber Drawing Surface and Full Set of Accessories for Rough Size Lumber

  • [Anchor Your Cemented Posts]: The BISupply U-Shaped 4x4 Post Anchor Concrete Brackets 4 Pack fits standard 4 x 4-inch (10.2 x 10.2 cm) square posts.
  • (2) 3.75-inch (9.5 cm) long closed sides with predrilled screw holes and (2) 3.4-inch (8.6 cm) long open sides.
  • [Anywhere Posts are Needed]: Use as deck footing anchor, patio post holder, pergola anchor, or gazebo stabilizer for posts up to 4 feet (1.2 m) high.
  • Anchor post spike holder stands 3 inches (7.6 cm) above surface while spike end pokes 7 inches (17.8 cm) into concrete to give you 10 inches (25.4 cm) total.
  • [Install Easily]: Set the rebar spike in wet concrete before it cures and let dry for a permanent post mount.
  • Insert your wood post and install screws (not included) through the 10 predrilled holes (5 on either side) that sit approximately 2 inches (5.1 cm) apart.
  • [Built to Last]: Post hole spike anchor constructed of durable steel with a black powder coat finish for maximum longevity.
  • 0.6-inch (1.6 cm) diameter rebar spike adds strength and stability.
  • [Package Contents]: Wood post anchors package includes 4 individual post holder deck brackets.
  • Wooden posts and installation screws not included.
Check Stock

uxcell 10Pcs 9mm-15mm Grip Range Toggle Hollow-Wall Anchor Screw Eye Assortment

  • Wedge anchor provides a secure hold in solid masonry and uncracked concrete.
  • Anchor consists of a 304 stainless steel body, washer, nut, and clip to provide more corrosion resistance than galvanized or zinc-plated steel anchors.
  • Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code.
  • Ultimate tensile strength is 2,000 lb. at 1-1/4" embedment depth in 4,000-psi concrete with a static load.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

(Qty 1280) Masonry Screws 1/4” x 2-1/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (15.99 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 3/16” x 1-3/4” Blue, P/Flat Head Concrete Screws Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock