Top Weld Neck Steel Flange

Qiilu 2in Weld On Filler Cap Aluminum Alloy Weld On Filler Neck and Cap 2' Weld On Fuel Filler Neck with Cap Fuel Tank Parts Car Refitting(Black)

  • 2" Weld On Filler Cap --- This fuel filler neck and cap is suitable for welding on 2 inch inner diameter pipe interface. The weld on fuel tank filler neck and cap is easy to install, no need complicated tools, convenient and practical for using.
  • Superior Quality Aluminum Alloy --- The weld on fuel filler neck with cap is made of high‑quality aluminum alloy material, firm, anti‑rust, and durable in use. 100% brand new, please be assured of your purchase.
  • Professional Manufacturing --- The aluminum weld on filler cap has excellent mechanical stability and corrosion resistance for high reliability. Precision‑machined to exact tolerances for trouble‑free performance.
  • Size --- The cap diameter is about 58mm / 2.3in, cap height is about 15.5mm / 0.6in, overall height is about 81mm / 3.2in, bore is about 47mm/1.85in, neck outer diameter is 2in, neck thread and cap thread are M52x2.5.
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every fuel filler neck must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

  • 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
  • 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
  • 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
  • Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
  • Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check Stock

Dynabrade 52633 5-Inch 127 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch - 11 Spindle Thread,Teal

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 5-Inch (127 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25215 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 5-Inch (127 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

Dynabrade 52632 4-1/2-Inch 114 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch 11 Spindle Thread

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 4-1/2-Inch (114 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25212 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 4-1/2-Inch (114 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

Fujikura New Model FSM-38S V-groove Alignment Welding Fusion Splicer with CT-50 Cleaver and other accessories.

  • ...amping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
  • 【Feature】1.Speed regulation. 2.Structure of precision, easy to operate, flexible to use. 3.Especially suitable for under 10KG flange, steel pipe and other seam welding. 4.High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision.
  • 【High Positioning Accuracy】Light weight, easy to use, handling, easy to operate.
  • Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
  • Using foot switch control table rotation, easy to control rotation.
  • 【Shipment】We ship directly from the US warehouse.Feel free to contact us if you have any questions.We will provide the best suitable solutions for you.We are committed to provide best service for every customer!.
Check Stock

3M 31801 Green Corps 1/2" x 18" 36 Grit Abrasive File Belt

  • Sanding belt for spot weld and hem flange removal.
  • Aluminum oxide minerals deliver a fast cut rate.
  • Abrasive belt made for increased durability and long-lasting service.
Check Stock

Dynabrade 52712 Diameter Right Angle Depressed Center Wheel Grinder, 2-Inch 51mm

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 2" Diameter, Right Angle, .4 hp, Rear Exhaust. 20,000 RPM.
  • Includes 90999 Depressed Center Wheel (24 grit), 2" diameter with 3/8" center hole, guard and wheel flange set also included.
Check Stock

RetroRubber OEM Grade Butyl Headlight Sealant, Gray

  • ★Butyl Sealant Main Application: Butyl rubber tape is suitable for the shock-absorbing paste of windshield, door waterproof film,decorative parts,car lamp,bus body and frame,as well as the sealing of body seam and flange plate.
  • ★Excellent Sealing: Our Butyl rubber sealant features excellent sealing adhesion,butyl tape can be sticky to any type of metal, concrete,glass,plastics and porous surfaces,no worries for falling off. Easy installation and removal.
  • ★Easy To Use: Simply release the butyl sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the weld areas should be dry,clean,free from dust,oil and grease.Butyl rope prevent leakage,corrosion,deformation,vibration, weather and aging. Non-toxic, tasteless, pollution-free, easy to use.
  • ★Black Butyl Tape: Rubber Sealant is a non-drying,non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and waterproofing,high viscosity,elasticity and tightness.
  • ★Butyl Windshield Sealant Size: Butyl sealant Diameter: 9mm, Length: about 4 meters. It is long enough for re-sealing about 2 or 4 headlight assemblies, easy to cut to fit for your need.
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

HITBOX 200A ARC Welder Alkaline Electrode Weldable, 110V 220V 2 IN 1 Lift TIG/MMA VRD Continuous Welding Machine Fits Below 1/8' 4.0 mm Welding Rods,Hot Start Welder for Outdoor Home Industry Use

  • Unique arc welder with lift function-Usually, arc welders can only weld carbon steel, alloy steel, mild steel, and zinc plated pipes. With lift tig capability, our MMA-200 can weld these materials as well as stainless steel. Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 200A, and it can handle alkaline welding rods! !!.
  • Weld more types of rods-As you know, it is difficult to weld 7018 and cellulose rods with an arc welder with low no-load voltage. To meet the needs of our customers who weld these rods, we increase the no-load voltage of this welder to 78V. Now you can weld other common rods such as 7018 cellulose rods and 6013J422. You can weld 2.5mm 3.2mm rods for a long time, drag solder or weld 1/8" 4.0mm rods for 1-2 hours.
  • 110V 220V Dual Voltage Arc Welder-This welding machine is 110V 220V and comes with a 35-50mm² quick connector, which can withstand higher current than other connectors. This feature allows the welder to work longer.Because of the high current, extending the weld cable to 50 meters does not attenuate the current..
  • 60% duty cycle, longevity-The rated duty cycle of HITBOX MMA200 is 85% for arc welding and 50% for TIG welding. Auto....
Check Stock

2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel

  • 【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
  • 【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • 【Size】M18X1.5 thread adapter, confirm the product size before buying..
  • 【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
  • 【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock

TFCFL Turntable Table, DC24V 20W Rotary Welding Positioner Turntable Table High Positioning Accuracy Suitable for Cutting, Grinding, Assembly, Testing and Other Seam Welding (10KG)

  • ...le rotation, easy to control rotation.
  • Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
  • Anti-electromagnetic design, efficiently reduce high frequency interference on TIG welding..
  • √ 【Rotary Welding Positioner Turntable Table Application】Especially suitable for under 10KG flange, steel pipe and other seam welding. Used for annular welding, cutting, polishing, assembling etc. Support CO2 welding, MIG, MAG, TIG welding etc. Also for cutting, grinding, assembly, testing and other processes..
Check Stock