Top Weld Power

Spot Welder Rechargeable Upgraded Enhanced Spot Welding Machine 6700Mah Battery for Energy Storage Protable Spot Welding Equipment with USB Fast Charging

  • ...ge for 4 hours.Built-in high rate lithium polymer battery, the maximum output current up to 650A, after full charge can continuously weld thousands of points. 6 levels can be adjusted and Battery spot welder meet the needs of more professional.
  • Safety Comprehensive Indicator- Portable spot welder machine with output power and residual power indicator, weld machine are 2 output modes: 1.5S timing trigger output and automatic detection solder pen output.
  • The spot welding kit tool has 4 double-color indicator lights, blue indicating remaining power and red indicating output power.
  • Charging indicator: red means charging, blue means full.
  • 6700 mAh Battery- As a rechargeable mini spot welder, diy spot welder adopts built in 6700mAh high-rate rechargeable battery. So, spot welding fully charged within 3 hours. It can continuously weld thousands of points after being fully charged with max output 650A. Portable welding machine can easily be used continuously for 18 hours. Welding machine has been professionally tested and can be used for more than 8 years.
  • Intelligent and Safe - The use of upgraded chip, so that the use of electric welding more in line with the human nature. When the temperature is higher than 60¡ã, portable welding machine will automatically....
Check Stock

Forney 30701 E7018 Welding Rod, 3/32-Inch, 1-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock

Weld On Grab Chain Hook G70 3/8\ Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tow Tie Down Forged Steel Working Load Limit: 6600 lbs

  • Weld-on Type, Grab, Hook. Working load limit 6600 lb.. Size 3/8 inch, Grade 70, for use with 3/8 in chain.
  • The best hook-used for welding on the tractor bucket, it is very suitable for any field of use, and can be used with the following statements: weld on hooks weld chain hook weld on clevis weld-on clevis grab chain hooks weld tow hook weld hooks for buckets forks weld hook3/8 weld hook grab hooks 3/8weld on grab hook weldable hooks weldon hooks weld clevis hook 3/8weld on chain hooks.
  • Grab hooks work well with chains and ratchet binders for securing your load or for tow anchors..
  • Material: Forged Steel，Package Includes:4pcs hooks.
  • Note: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We make every effort to provide customers with satisfactory service. Feel free contact us by emails if you have any problems..
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

Forney 30705 E7018 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

2021 Everlast PowerPro 164Si 160Amp TIG Stick Pulse 40Amp Plasma Cutter 110v/220v Multi Process Welder

  • Generous 60% Duty Cycle in TIG mode at full power.
  • Simple 2 position pulse allows you to select 1 Hz or 25 Hz for improved weld appearance and arc focus.
  • Ideal for portable repair or farm / light shop use.
  • weld up to 1/4" on single pass and 3/8" on multi pass.
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Spot Welder, Seesii 11000mA-h Battery Spot Welder with LCD Screen Upgraded Enhanced 80 Gears Adjustable Portable Mini Spot Welder with 2x5M Nickel Sheet & 4X4 Holder For Making Battery Packs

  • ✅【Upgraded Enhanced Battery Spot Welder】: This mini spot welder enhances the battery energy storage capacity to 11000mAh, power-bank design, with type-C charging cable,can be fully charged within 3-5 hours,and it can continuously weld thousands of points after being fully charged.Most importantly, the upgraded spot welder can easily weld 0.1-0.15mm thick nickel sheets, which can help you make a perfect battery packs,(Note:Cannot weld nickel strips with a thickness of 0.2mm)..
  • ✅【80 Levels of Adjustable Output】: Our Seesii spot welder SE-002 with 80 levels output power adjustable,it can be adjusted 1-8 and 1.1-5.4-8.0 levels according to your different needs,very fine adjustments can make the welding more precise and the spot welding effect more perfect.If you are a new learner you can adjust the delay time to delay the automatic weld time( 1-5s）, it’s very friendly for the beginner..
  • ✅【LCD Visible Screen Display】: Our spot welder for battery is 2022 newly designed with visible colorful LCD Screen, can clearly know the remaining battery, delay time, temperature and gear level of the spot welder.The working condition of the product can be understo....
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Plast-aid Multipurpose Repair Plastic - 6 oz Kit

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be....
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

Eagle-2000-FSC Gate Opener with Free Receiver, 2 Remotes and EG360 Monitored Photo Eye Included

  • ...ontrol Board, the ultimate feature packed and installer friendly control board in the industry. Featuring an open and close delay, motor brake, anti-tailgating, partial open, stop-reverse and auto close timer.
  • Safe and Secure – The Eagle-2000-FSC allows you to open the gate with a use of the release crank during a power outage. This model cannot be manually pushed open nonetheless, it is equipped with lighting and surge protection.
  • Power and Hardware– With the service technician in mind, the Eagle-2000-FSC is easy to install. Equipped with a no-weld Chain Brackets and a Pre-wired Receiver Terminal. It is also powered by ½ Horse Power Motor & an AC 120 VAC @ 60 Hz 5.7 AMP. Additionally, with an all-weather UV Resistant cover shell, the Eagle-2000-FSC can withstand all types of weather environments.
Check Stock