Top Weld on Exhaust Systems
Exhaust Tip 3.00" Inlet Dual 3.00 X 9.75 Long Round Double Wall Gloss Black 304 Stainless Steel WDWR300975-300-GBK-SS Wesdon Exhaust Tip
- Exhaust Tip 3.00" Inlet Dual 3.00 X 9.75 Long Round Double Wall.
- Weld On Style fits a 3.00 Exhaust Pipe 3.00 inlet.
- 304 Stainless Steel High Gloss Black Powder Coated.
- This is made to fit a 3.00” exhaust pipe. Please measure your exhaust pipe to make sure you have a 3.00” exhaust pipe outlet and that you have the room for it to fit..
Check StockUpower 2 inch Inlet Exhaust Tip Burnt Muffler 3 inch Outlet, 2' to 3' 14.6' Length Exhaust Tip Universal For Car Truck
- Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.6 inch, Exhaust Muffler body width 4 inch.
- 2 in 1 Design: This is a 2 inch muffler resonator with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
- High Quality Material: Upower exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made by premium cotton helps absorbing sound and producing a low, deep tone, durable and Anti-corrosive, never Rusty.
- Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe..
- Note: 1 Year Warranty, No instruction is included. Professional installation is highly recommended..
Check Stock2 Bottles of New BG 44K Platinum
- Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
- Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
- Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
- Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
- Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check StockCURT 49090 2-Inch x 9-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockCURT 49240 2-Inch x 24-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockCURT 49120 2-Inch x 12-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockCURT 49180 2-Inch x 18-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockCURT 49060 2-Inch x 6-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube
- STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
- HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
- REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
- READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
- PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check StockRemflex 2048 Exhaust Gasket for Chevy V8 Engine, (Set of 2)
- Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6/6.0L- LS1, LS2 Vortec, 1-1/2" RP, For Weld Bead Headers, 2/Set.
- additional sealing material is provided around the weld bead to provide a better seal.
- There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check StockJWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories
- Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
- Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
- Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
- Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
- Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check StockExhaust Tip 3.00' Inlet 4.00' Outlet 16.00' long Dual Slant Angle Stainless Steel WDWD304016-300-SS Wesdon Exhaust Tip
- Exhaust Tip 3.00″ Inlet 4.00″ Outlet 16.00″ long Dual Slant.
- Double Wall Slant Could be used as Left or Right Side.
- Weld On Style fits a 3.00 Exhaust Pipe 3.00 Inlet.
- (Please measure to make sure it fits your Car or Truck) fits a 3.00 Exhaust Pipe 3.00 Inlet.
Check StockExhaust Tip 2.50' Inlet 4.00' Outlet 16.00' long Dual Slant Angle Stainless Steel WDWD304016-250-SS Wesdon Exhaust Tip
- Exhaust Tip 2.50″ Inlet 4.00″ Outlet 16.00″ long Dual Slant.
- Double Wall Slant Could be used as Left or Right Side.
- Weld On Style fits a 2.50 Exhaust Pipe 2.50 Inlet.
- (Please measure to make sure it fits your Car or Truck) fits a 2.50 Exhaust Pipe 2.50 Inlet.
Check Stock