Top Weld on Hubs

CURT 49120 2-Inch x 12-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49180 2-Inch x 18-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49060 2-Inch x 6-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Translucent Yellow - 25 ml

  • J-B WELD PLASTICWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on various plastic surfaces (Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl). J-B Weld PlasticWeld comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticWeld takes 5 minutes to set and 1 hour to cure. J-B Weld PlasticWeld set and cure color is Translucent Yellow..
  • STRENGTH: J-B Weld PlasticWeld has tensile strength of 3900 PSI..
  • SURFACE APPLICATIONS: Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

WEISHUJI 7mm Wheel Hex Hubs Drive Adapter, Wheel Hex Drive Hub Adaptor, Wheel Hex Convert Adapter Hub A949-11 for WLtoys A959 949 969 1/18 RC Car Spare Parts

  • 7mm Wheel Hex Hubs Drive Adapter fits for 1/18 Wltoys 4WD A949 A959 A969 A979 K929 A959-B A969-B A979-B..
  • 7mm Wheel Hex Hubs Drive Adapter is easy to run 12mm wheels on a 1/18 Wltoy car..
  • 7mm Wheel Hex Hubs Drive Adapter hex dimension is 0.47 in (7mm), Wheel Hex Convert Adapter Hub Axle hole diameter is 0.157 in, Wheel Hex Convert Adapter Hub Thickness is 0.157 in..
  • 7mm Wheel Hex Hubs Drive Adapter is made of high-quality Aluminum alloy, Wheel Hex Convert Adapter Hub is lightweight and durable..
  • Package of 7mm Wheel Hex Hubs Drive Adapter includes: 4 x Wheel Hex Convert Adapter Hub 4 x Axle Pins.
Check Stock

J-B Weld 50151 WoodWeld Epoxy Syringe - Light Tan -.85 fl. oz.

  • J-B WELD WOODWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on wood surfaces J-B Weld WoodWeld is perfect for DIY wood repair and wood projects by creating a bond stronger than wood J-B Weld WoodWeld now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, WoodWeld takes 6 minutes to set and 1-3 hours to cure J-B Weld WoodWeld set and cure color is light tan.
  • STRENGTH: J-B Weld WoodWeld has tensile strength of 1800 PSI.
Check Stock

Mounting Bungs and Plugs Stainless Steel M18 x 1.5 Thread Notched Style Exhaust Weld in Bung with Gaskets 2 Sets

  • The mounting bung is made of stainless steel, easy to weld on exhaust, headers, down pipes, etc..
  • Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • The bung cap can be used to seal sensor bungs that are not being used in the exhaust system. The gasket helps create a tight seal to prevent any....
  • The M18*1.5 bung features a notched style, making it easy to weld by having the curve sit against the rounded surface of the exhaust or downpipe..
  • The weld in bung and plug set features a straight thread size of M18*1.5 mm, which is suitable for most vehicles..
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

J-B Weld Tabletop Epoxy Resin, 1 Gallon Kit, Cures Clear, Fast Cure Time, Minimal Bubbling, Scratch & Water Resistant

  • J-B WELD CLEARTOP: is a 1:1 mix ratio, crystal clear pour-on epoxy that provides a protective surface for all your projects. J-B Weld ClearTop is a self-leveling, high viscosity and solvent-free formula allowing for a safe, smooth and even finish on your project. J-B Weld ClearTop resist scratching, contact heat (up to 150oF) and impact! ClearTop can be mixed with dyes to add coloring to the Epoxy and be sanded after fully cured. The half gallon bottles have graduated marking on them to help make sure you measure even amount of Part A & B..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

IPS AAB4 Weld-On 1.25 oz Applicator Bottle with Needle

  • For use with Weld-on #3 and Weld-on #4 Acrylic Plastic Cement.
Check Stock

Coleman Bungee Sling Camping Chair, 66x70x91cm, Lime

  • COMPACT: Saves up to 35% more storage space than the Coleman Utopia Breeze Chair.
  • QUICK SETUP: Coleman SpyderHub technology features spring-loaded hubs that rotate to attach frame and keep tension on the fabric, for easier setup and takedown.
  • poles with shock cords store inside the hubs for stress-free organization and carrying.
  • roomy 18.5-in. seat, comfortable 15.5-in. sitting height.
  • CUP HOLDERS: Hubs unfold, converting into 2 built-in cup holders conveniently located on each side.
  • KEEPS YOU COOL: Breathable mesh sides provide airflow for ultimate comfort at the beach.
  • STABILITY: Rounded feet offer added stability on different types of terrain.
Check Stock

Auto Locking 4WD Hub Link - Fits Front Left or Right - Replaces 1C3Z-3B396-CB - Compatible with Ford, Lincoln Vehicles - 1999-2004 F250, F350, F450, F550, Expedition, Navigator - 1C3Z3B396CB

  • Replacement 4X4 4WD Auto Locking Hubs - Located on the front wheel hubs the 4WD actuators control power transferred from the axle assembly to the front wheels. This 4x4 locking hub fits both right and left front axles on your F250, F350, F450, F550 Super Duty and Expedition, Excursion, and Navigator..
  • Compatible Replacement for Ford & Lincoln - Fits both front left or front right wheel locking hubs on F250, F350, F450, F550 Super Duty 1999, 2000, 2001, 2002, 2003, 2004 - Excursion 2000 -2005 - Expedition and Navigator 2001-2002 - Includes model years 99, 00, 01, 02, 03, 04, 05.
  • Replaces Part# - Replaces part number 1C3Z-3B396-CB and 1C3Z3B396CB - While this is a not a genuine OEM part, it is a direct replacement for the factory 4WD locking hubs on the driver or passenger side of your F250, F350, F450, F550 Super Duty and Expedition, Excursion, and Navigator..
  • OEM Fit, Quality, Finish - This 4x4 front axle actuator is a direct replacement for the factory actuator. Each actuator comes pre-lubed for easy installation on the wheel hub and axle assembly. Save hundreds off dealer prices and restore the function of your 4x4 system with a new locking hub..
  • Lifetime Warranty - The 4WD Auto Locking Hubs comes complete with a lifetime warranty. If the locking ....
Check Stock