Top Welded Metal Sheet

Bad Dawg Accessories Kawasaki Mule Pro FXT Front Bumper 693-6819-00

  • The 1/8 in. thick sheet metal is laser cut, precision bent and, hand welded at our facility.
  • Our high strength tubing mounts provide rigid support that is second to none. This bumper comes winch.
  • Easy installation,high durability, and an all around great look make this bumper a "must.
  • Fits for - 2015-2016 Kawasaki Mule Pro FXT.
Check Stock

14-Pack Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • Durable Material : The preferred material used was top-quality steel which has excellent thermal resistance.The cutting blade has a diameter of 3/8 inches, and the arbor is of standard 1/4 inch size..
  • Double Sided : Double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.when 1 side gets dull you simply have to flip the bit around on its arbor assembly..
  • Easily Separate : There is a spring-loaded pin in the center of these blades to guide the cutter to grind through the spot-welded material,drilling out spot-welds in a manner that leaves a very clean hole without distorting the sheet metal..
  • Fit For : Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets..
  • Spot Weld Cutter Tool:Easy to replace the blades when it begins to dull..
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

3PACK Steel Mesh Screen 11”X11”(280mmX280mm), 20 Mesh Steel Woven Wire Mesh 304 - Never Rust 1mm Hole Keep Rodent Out or Make Any Shapes by Valchoose

  • ✿---- Stainless steel perforated sheet is made of 304 stainless steel, high strength, corrosion-resistant, anti-corrosion and rust-proof, durable and has a long service time..
  • ✿---- Perforated metal sheet has a wide range of use for home, industrial, indoor and outdoor, you can prepare some at home, you will use it..
  • ✿---- Perforated Sheet not only has a strong practicability, but also has decoration function..
  • ✿---- Size: 11.8inch * 11.8 inch (30*30cm) , thickness 1.2 mm(0.048 inch), can be welded or cut arbitrarily..
  • ✿---- Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Silver

  • Silver Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening.
  • Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads.
  • Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings.
  • 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum.
Check Stock

Baileigh 40-Inch Sheet Metal Finger Brake (BB-4012F)

  • 40" BOX BRAKE: Bends up to 12-gauge mild steel (16-gauge stainless steel)..
  • FULLY-WELDED HEAVY STEEL FRAMEWORK: Minimizes flex and deformation..
  • HARDENED BENDING DIE: Ensures years of high-quality results..
  • SPRING-LOADED CYLINDER: Assists in lifting the apron, especially helpful when you’re bending at full capacity..
  • FOOT-CONTROLLED CLAMP: Leaves your hands free to position the sheet metal before clamping in place..
  • CREATE DIFFERENT SIZES: Includes 11 hardened fingers of varying widths that you can easily rearrange..
Check Stock

AggAuto Universal 40"x13" Car Grill Mesh - Aluminum Alloy Automotive Grille Insert Bumper 4x8mm Rhombic Hole, One of the Most Multifunctional Shape Grids 100x33cm Black

  • 【Specifications & Materials】This metal mesh is stamped and made of steel plate, Not welded and braided, The holes of this metal mesh are diamond-shaped, 0.6"X1.6" mesh, Spacing 0.08" , Thickness 14GA (about 0.08"), Size 48"X24", Mesh 1.6" parallel to 48", Mesh 0.6" parallel to 24", The metal grate is flat, it is shipped flat, Not curled..
  • 【Quantity&Property】1-packs, You will receive 1 pieces of metal mesh, The size is: 48"X24", The mesh is 0.6"X1.6" diamond-shaped opening area 80%, Flat packaging. This metal mesh is very strong, Ordinary scissors cannot cut it, You'll need an angle grinder..
  • 【Wide range of applications】Very durable expanded metal, this metal mesh can be used to make screen door guard and screen door grill, all kinds of maintenance and making screen grille guards, can also be expanded metal for grill, can be used as decorative sheet metal, expanded metal sheet can be sprayed Your favorite color, beautiful and sturdy.
  • 【Precautions】This expanded metal mesh is bare steel, you may receive it with rust, but this does not....
Check Stock

A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black

  • Black Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening.
  • Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads.
  • Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings.
  • 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum.
Check Stock

Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

  • ◆【Fit for】 : sharp double-sided blades, made of high-quality heat-resistant and thick steel. The perfect tool can remove the spot-welded panel or metal plate without distorting the metal or damaging the panel below, thereby reducing skid welding and The need to break the weld. efficient. Suitable for thin stainless steel plate, iron plate, aluminum plate, F.R.P or other thin metal plates..
  • ◆【Material】: The preferred material is made of high-quality steel with excellent heat resistance, high hardness and wear resistance. The drill center pin is spring type.The diameter of the cutting blade is 3/8 inch, and the shank is a standard 1/4 inch size.with a flat shank to eliminate rotation in the chuck..
  • ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
Check Stock

LJXX Stove, Wood Burning Portable Stove, Portable Camping Hiking, Backpacking and Survival Stove, Charcoal Camping Stove with Handle for Ourdoor, Cooking, BBQ

  • ...lication】: The tent wood stove is very suitable for outdoor,camping,tent heating,hunting,fishing,cooking,boiler water,etc. Please wear gloves when assembling the tent wood stove. Sometimes there are sharp edges on the pipes and stove that can cut you..
  • ♣【Heat output and high efficiency】: The furnace is fully welded, airtight, and the combustion speed can be precisely adjusted..
  • ♣【Sturdy Structure】: Our wood stoves are extremely easy to assemble. With open mouth for convenient adding wood, the stove can stably place your cookware..
Check Stock

Body Armor 4x4 TJ-4322 Black - Steel Standard Wheel Base Tub Rail for 1997-2006 Jeep TJ YJ and CJ-7 Pair

  • The tub rail from Body Armor is the first bolt-on rail that is designed to protect the Jeep's tub from trail damage.
  • Designed to match the look of the Body Armor rock crawler side bars.
  • Sheet metal back plate with 1.75 inch diameter 3 millimeter thick wall tube welded on for strength.
  • Simple installation, drilling is required.
Check Stock

MUKLEI 6 Pcs 6 x 6 Copper Sheets 20 Gauge/0.8mm Thick Pure Copper Sheet Metal Copper Sheet with Protective Film for Crafting Repairing and Welding

  • ...lent workability. The sheet is cut by professional machines, and it has a clean-cut surface, uniform thickness, and precise size..
  • EXCELLENT WORKABILITY - The copper plate is strictly processed and examined, which ensures a reliable quality. The plate is easy to stretch, polish, coat, cut, drill, and bend. It can be welded and electroplated without causing deformation..
  • VALUABLE PACKAGE - The package contains 6 pieces of metal copper sheets with a size of 6 x 6 inches and a thickness of 20 gauges/0.8 mm. Both sides of the plate are covered with protective films preventing it from scratching and oxidizing during packaging and delivery..
  • MULTIPLE USES - The 20 gauge copper sheet can be used in many sectors like construction, electronics, transportation, shipping, car maintenance, manufacture, etc. It can be a good choice to produce hardware accessories, marine equipment, machine units, etc..
  • CONSIDERATE SERVICE - There is no doubt that if the copper sheets don't satisfy you, please feel free to contact us. Our products provide a 30-day refund service. You have no risk of buying. Our customer service will provide suggestions and answer any questions within 24 hours. I hope you enjoy a pleasant shopping experience..
Check Stock