Top Welding 3 way Clamps

EVIL ENERGY 3.0 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel

  • Size: Joins 3.0" OD pipe to 3.0" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

EVIL ENERGY 3.0 Inch Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2PCS

  • Size: Joins 3.0" OD pipe to 3.0" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 3.0 Inch

  • Size: joins 3.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
  • Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
  • Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..
Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • ...R PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
  • Each wood working clamp comes lightly pre-oiled fo....
Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 3.0 Inch,2Pcs

  • Size: joins 3.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
  • Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
  • Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..
Check Stock

HEIHAK 3 Packs 18 Inch Large C Clamp Locking Pliers with Swivel Pads, Heavy Duty Vice Grip Clamp Set, Adjustable Welding Clamps Tools for Woodworking Welding

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

Fulton 2 Pack of Aluminum Universal Fence Clamps with a ¼ inch to 6¼ inch Clamping Capacity with Steel Threaded 3/8 inch Post

  • The Fulton Aluminum Universal Fence Clamps are the perfect solution for clamping auxiliary fences, stop blocks, setup blocks, corner clamps and more to vertical flat surfaces like fences without the clamps getting in the way. The clamp post arm fits into a 3/8” hole and is at a slight inward angle to keep the lower part of your fence or block up against a flat surface. Fitting into a hole on the top of the fence or block keeps the clamp completely out of the way unlike F-clamps or C-Clamps..
  • The versatility of these clamps allows you to use them in most any way imaginable to make your work flow quicker and easier. With these fully adjustable clamps, you can clamp stock pieces as small as ¼” and stock pieces all the way up to 6¼”. This means that you can attach your sub fences and more to most any table saw, router or even a band saw fence. You can even use these clamps to clamp blocks flat onto your workbench to act like a pseudo bench dog..
  • This pack of clamps includes two Fulton Aluminum Fence Clamps which is perfect for most fence or block applications. Two clamps also work well with 90 degree corner clamp squares with a 3/8” pre drilled hole opening on both sides of the clamping square. Some 90 degree clamping squares are plastic or a com....
Check Stock

MAXPOWER 15-pieces Locking Pliers with C-clamps Set, Long Nose Pliers, Pinch Off Pliers, Sheet Metal Clamp, U Shaped Pliers with Tool Bag for Storage

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

YESWELDER Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Suspender Fixture Adjustable Pads Kit(4 Pcs)

  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time.
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply.
  • MAGNETIC HOLDERS▶ Magnets on the pad face only.
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps.
Check Stock

MIG Welder ，MYYWELD Welding Machine 160A 3 in 1 MMA/MIG/LIFT TIG Welder Machine with IGBT Inverter，Flux Core Welder Gas/Gasless Welding Wire Dia 0.8-1.0 mm 2lbs Welding Wire Stick Welder 220V

  • 1.EASY TO USE-This welder is a perfect entry level dual digital display easy to read and set. Besides, the welder machine uses 0.8mm.or 1.0mm flux....
  • 2.BROADLY APPLIED- Our stick welder is a wide range of uses-suitable for basic DIY such as household welding, hanger, covering, guardrail, Repair,....
  • 3.IGBT TECHNOLOGY -Using IGBT inverter technology gives a more stable performance than traditional welder. It has the following advantages--stable....
  • 4. MULTIPLE WELDING-MIG/lift TIG/stick/MMA welding machine,gas/gasless modes all are available. Can be used for welding kinds of metals. Meeting....
  • 5. THE PACKAGE INCLUDS -1 MIG-160Welder Machine, 1 welding holder, 1 ground clamp ,1 welding torch, 2 hose clamps , 2lbs welding wire, 1 transparent....
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock