Top Welding Cable Lug Connector

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

  • 4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

  • Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
  • Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
  • 50-series (35-50mm, #2-1/0, P/N 129527/129526).
  • 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 315Amp (2, DKJ35-50)

  • Cable Panel Connector /Euro Style Cable Connector-plug Fit all TIG Welding and Plasma Cutter Machine.
  • 1pcs DKJ35-50 Connector with Black Color..
Check Stock

Hammer Battery Lug Crimping Tool for 8, 6, 4, 2, 1/0, 2/0, 3/0, 4/0 American Wire Gauge (AWG) Wire and Cable

  • Hammer Battery Lug Crimper for use with 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1/0 AWG, 2/0 AWG, and 3/0 (American Wire Guage) cable.
  • Perfect for crimping battery cables, welding cables and any other wire crimps for your auto or marine project.
  • Lug Crimper is spring loaded and only requires a standard hammer and solid surface to operate.
  • Lug Crimper is made of high quality hardened steel for years of maintenance free use.
  • Compact size! Only 3 1/2 inches tall, allowing easy storage in any size tool box.
Check Stock

9TRADING Replacement Mig Welding Gun Stinger Torch Lead 4 Clarke 130EN 180EN Welder Parts

  • The gun is 10 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
  • You can see the gas hose, trigger connector, and the welding current cable in the second picture..
  • This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers..
Check Stock

Senmit Hydraulic Crimper with 11 Die Sets– Premium Quality Industrial Hydraulic Cable Lug Crimper – Solid Electrical Terminal Cable Wire Crimper –20 US Ton Capacity – 6 Gauge through 600mcm

  • COMPLETE CRIMPER KIT: This lug crimper includes everything you need for a smooth and user-friendly experience: hydraulic crimper, 11 dies (AWG: 6, 4, 2, 1/0, 2/0, 3/0, 4/0, MCM: 300, 350, 500, 600) and a portable, heavy-duty storage case..
  • CAPACITY: This industrial lug crimper has a true 20 US ton capacity, being designed for 6 gauge through 600mcm, providing perfect crimp terminations with every use..
  • WIDE APPLICATIONS: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable lug crimper will do an outstanding job..
  • HEAVY DUTY DURABLE CONSTRUCTION: Featuring a black oxide crimp head and dies which are guaranteed not to chip or flake, this lug crimper is much better than classic chrome-plated models, for an enhanced performance..
  • EASY TO USE: 4 steps to perfect crimping: install the die set that matches your terminal size, rotate the release valve in order to close it, pump the handle until the resistance felt becomes significant and open the release valve by rotating to the left..
Check Stock

ABN L5-50R Connector – 50 Amp Twist Lock Inlet Locking Power Cord Connector Locking Power Inlet Plug 50A 125/250V

  • CONNECT YOUR CABLE: Use your generator, transfer switch, welding equipment, trailer, RV camper power inlet with this ABN Inlet Locking Connector.
  • KEEP OUT PESTS: Replace your power cord with this twist lock connector so the cord can be removed and stored without leaving an opening that mice or....
  • SECURELY HOLD CABLE: This connector comes with strain reliefs that mount inside the base of the connector to hold the cable (clamp for the cord).
  • PERFECT SIZE: Approximate measurement across the face is 2 inches (5.1cm).
  • Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm....
  • Remove housing by loosening face screws and slide over cable (If a weather-resistant boot is used, slide this over....
Check Stock

150 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
  • Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
  • Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

150 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
  • Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
  • Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

WeldingCity 100-amp 9-ft Air-cooled MIG Welding Gun Replacement Torch Stinger for Clarke Welder 130EN 180EN 140T

  • Premium quality 100-amp with 6-ft and 9-ft cable air cooled MIG welding gun, ideal replacement for Clark 130EN, 180EN and 140T. Reference Clark P/N: WE23000037..
  • With trigger direct plug, gas line and power cable lug terminal designed for easy replacement to many Clarke or Shark welders 85EN, 130EN, 180EN, 140T etc. with Tweco style torch. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Front consumables comes with Tweco style 11-35 (0.035") contact tip, 21-50 nozzle and 35-50 gas diffuser. Current rating: 100-amp..
  • Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 100-amp 6-ft Air-cooled MIG Welding Gun Replacement Torch Stinger for Clarke Welder 130EN 180EN 140T

  • Premium quality 100-amp with 6-ft and 9-ft cable air cooled MIG welding gun, ideal replacement for Clark 130EN, 180EN and 140T. Reference Clark P/N: WE23000037..
  • With trigger direct plug, gas line and power cable lug terminal designed for easy replacement to many Clarke or Shark welders 85EN, 130EN, 180EN, 140T etc. with Tweco style torch. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Front consumables comes with Tweco style 11-35 (0.035") contact tip, 21-50 nozzle and 35-50 gas diffuser. Current rating: 100-amp..
  • Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

KOTTO Hammer Lug Crimper Tool Combo Battery terminal Wire and Cable with 60 PCS Terminal Connector and 80PCS insulation tape heat shrink tube

  • WIRE GAUGE: Hammer Battery Lug Crimper for use with 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1/0 AWG, 2/0 AWG, and 3/0 (American Wire Guage) cable..
  • HIGH QUALITY: Lug Crimper is made of high quality hardened steel for years of maintenance free use. Ring Terminal made from pure copper with good conductivity and the Heat Shrink Tubing made of Polyolefin, shrinkage ratio:2:1.
  • WIDE APPLICATION: Perfect for crimping battery cables, welding cables and any other wire crimps for your auto or marine project..
  • AFTER SERVICE WARRANTY: Our US based customer service means that you can trust that if you’re not satisfied for any reason, you can get a hassle-free refund or replacement..
Check Stock