Top Welding Cable Terminal Ends

Hammer Lug Crimper Tool, Huazu Hammer Crimper Wire Terminal Crimper for Crimps Battery and Welding Cables 8 AWG to 2/0 Wire Gauge

  • FEATURES: All steel material, sturdy and durable. Tight riveting, small size and easy to carry. The elasticity of the compression spring acts on the crimping port, so that the port is in contact with the terminal at all times for easy operation..
  • WIRE GAUGE: 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 1/0 and 2/0 (American Wire Gauge) cable..
  • EASY TO USE: Adjust the size of the wire terminal crimper according to the wire. The V-shaped channel can fix the terminal in place and prevent it from sliding. Then put the connector and cable under the hammer crimping machine to keep it stable, and finally hit 1-2 times with a hammer to clean crimps. It is recommended to use a larger hammer..
  • CRIMPING TOOL: Hammer Lug Crimper Tool is ideal for batteries and welding cables..
  • PRODUCT GUARANTEE: You can enjoy our first-class service with 12-MONTH Warranty and 24-hour support for customer service. Please feel free to contact us if you have any issues..
Check Stock

WeldingCity 100-amp 9-ft Air-cooled MIG Welding Gun Replacement Torch Stinger for Clarke Welder 130EN 180EN 140T

  • Premium quality 100-amp with 6-ft and 9-ft cable air cooled MIG welding gun, ideal replacement for Clark 130EN, 180EN and 140T. Reference Clark P/N: WE23000037..
  • With trigger direct plug, gas line and power cable lug terminal designed for easy replacement to many Clarke or Shark welders 85EN, 130EN, 180EN, 140T etc. with Tweco style torch. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Front consumables comes with Tweco style 11-35 (0.035") contact tip, 21-50 nozzle and 35-50 gas diffuser. Current rating: 100-amp..
  • Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

WeldingCity 100-amp 6-ft Air-cooled MIG Welding Gun Replacement Torch Stinger for Clarke Welder 130EN 180EN 140T

  • Premium quality 100-amp with 6-ft and 9-ft cable air cooled MIG welding gun, ideal replacement for Clark 130EN, 180EN and 140T. Reference Clark P/N: WE23000037..
  • With trigger direct plug, gas line and power cable lug terminal designed for easy replacement to many Clarke or Shark welders 85EN, 130EN, 180EN, 140T etc. with Tweco style torch. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Front consumables comes with Tweco style 11-35 (0.035") contact tip, 21-50 nozzle and 35-50 gas diffuser. Current rating: 100-amp..
  • Small, lightweight gun that's great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Waterproof Junction Box Mcredy Waterproof Electrical Junction Box Ip68 Black 4 Way 5.5 Inch Pack of 1

  • Package Content: 1 x Black junction box, 1 x 4-terminal group, 1 x Set of screws.
  • The outdoor junction box are compact junction boxes for exterior use.The screw connector is a standard strip block type..
  • IP68 Weatherproof Junction Boxes: Built-in waterproof flame retardant silicone seal ring, the water tight inlets work well, can be used outdoors , indoors and underground..
  • Junction Box Total Size: 14x8.5x3.67cm/5.51"x3.35"x1.44".
  • The Larger design makes the connection more convenient, no tools required, no welding required, only need to connect the same type of wire together, no cable cutting, more convenient and safer..
Check Stock

ORCISH Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer (White)

  • Wide applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • Package comes with 6 sets 6-10 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
  • Quality material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
  • Easily installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable working environment: there are 12 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.
Check Stock

JSAUX 10FT USB C to USB C Cable 90 Degree, 60W Right Angle USB C to C Type C PD Fast Charging Cord Designed for Games, Compatible with Steam Deck, Switch, Samsung S23 S22, Pixel, iPad Pro Air, MacBook

  • ...e 10/ Note 10+/ A80, Google Pixel 2/3/4/5/6, Macbook Air / Pro, iPad 10th Gen, iPad Pro 2018/2020/2021/2022, iPad Air 4th / 5th Gen , iPad Mini 6 and more..
  • 【Ultra High Quality Assurancel】:Upgraded 3D aluminum connector and exclusive laser welding technology to prevent terminal detachment or rupture.The most flexible, powerful and durable material, makes tensile force increased by 200%, which can bear 15000+ bending test..
Check Stock

CERRXIAN 3.5mm TS Mono Male to 2 Pin Screw Terminal Female AUX Headphone Replacement Solderless Balum Converter Adapter (2-Pack)

  • One truth about working, you always need the cable or adapter when you don't have in your toolbox. That's why we choose these terminal-block audio connectors. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs..
  • Connecting single wires with open cable heads to your 3.5mm mono jack.With this adapter, you can convert 3.5mm audio interface signals into wires that connect audio signals from 3.5mm mono adapters. Corresponding to the channel terminal block, the wires fixed with screws are more useful, convenient and fast!.
  • Reliable connect, good performance with plastic construction and strain relief..
  • It is more convenient to use more quickly without welding..
Check Stock

36-inch 3/8” Battery Replacement Cable, 10mm Copper Lug Ends, Super Heavy-Duty 2 AWG 100% Copper, Automobile, Marine, Boat, Solar, Tractor, Mower, Golf Cart, Motorcycle, Heavy Equipment, by Tech Team

  • When it comes to battery cables the LOWER the AWG number the HIGHER the current carrying capacity. Tech Team’s #2 AWG cables carry far more current than other #4 AWG, #5 AWG, or #6 cables. This means less heat buildup and less voltage / amperage drop which prolongs the life of starters, inverters, motors, and other connected electrically powered devices..
  • Tech Team’s cables feature 10mm – 3/8” diameter tinned double crimped 100% copper lug terminal ends with a protective heat shrink polyolefin sleeves to prevent moisture incursion and eliminate corrosion. There is no need to buy battery cables with 5/16” diameter lug ends because the 3/8” (6/16”) will fit both size terminal studs..
  • Tech Team’s battery cables are the best you will find anyplace and are the best possible option for Marine, Boat, Solar, Inverter, Motorcycle, Automobile, Tractor, Bulldozer, Excavator, Riding Mower, Golf Carts, and many other applications. We price our #2 AWG cables to be competitive with thinner, lower capacity #4 AWG, #6 AWG, and #8 AWG cables..
  • Includes one (1) red 36 inch #2 AWG 100% copper stranded wire battery cable with 100% copper 3/8” diameter tinned lug terminal ends with hear shrink protective sleeves..
Check Stock

SOLEILLUNE Battery Cable Lug Crimping Tool for AWG 10, 8, 6, 4, 2, 1 Terminals with 60Pcs 8Specs Copper Ring Cable Lugs Kit Heavy Duty Wire Terminal Crimper for Electrical Connectors

  • ... handle of the Wire Crimper tool is made of high-quality 6061-T6 aluminum alloy, with a lighter weight of only 2.35 pounds, which makes the crimping tool more convenient to carry and use. The head of the wire crimping tool is made of high-quality carbon steel with longer service life. The long handle of the battery terminal crimper wrapped with non-slip soft vinyl help you use less effort when crimping..
  • 【ROTATE CRIMP DIES】The professional cable terminal crimping tools are available in 6 crimping sizes, 10, 8, 6, 4, 2, 1 AWG (Corresponding to 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²), and use a hexagonal rotating crimp die which is retained in place with a spring loaded locking pin. Thanks to processed by Wire EDM Cutting, the crimp die is more accurate than the ordinary casting die or stamped die..
  • 【EASY OPERATION】Open the handle of the crimper, then press the Lockpin and rotate the crimp jaw to the size you need, place the cable and lug, then pull strongly on the ratcheting wire terminal crimper to make a great crimp on the cable lugs. Finally, rotate the connector 90 degrees to another direction and repeat the previous step for secondary crimping. Crimping twice is more secure..
  • 【APPLICATION AND COMPATIBLE】Compatible with copper, aluminum....
Check Stock

Poyiccot 3.5mm Speaker Wire Adapter, 3.5mm (1/8") 4 Pole Stereo TRRS Male Jack to AV 4 Screw Terminal Block Balun Connectors Cable 30cm (3.5mm M/ 4pin)

  • Speaker Wire to 3.5mm Cable with Connectors 1: 3.5mm 1/8" TRRS (4-Pole) Male jack, Connectors 2: AV 4-Pin Screw Terminal Block jack,please note: Did not when when attached to wifi projector.
  • 3.5mm screw terminal cable,connecting single wires with open cable heads to your 3.5mm jack..
  • 3.5mm 1/8'' trrs cable, it has four total conductors - three signal and a ground as opposed to a more common stereo jack's two..
  • No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. Wiring diagram: PIN 1 - red wire.
  • PIN 4 - black wire. OMTP standard: PIN1 - Left channel.
  • PIN 4 - Ground. CTIA standard: PIN1 - Left channel.
  • 3.5mm trrs plug cable is more convenient to use more quickly without welding, and you can use the 22-18 gauge to connect..
Check Stock

Brileine Battery Cable Crimping Tool from AWG 8-1/0, Battery Cable Lug Crimper Tool for Heavy Duty Wire Lugs, Battery Terminal, Copper Lugs AWG 8-1/0

  • The Battery Terminal Crimper - Built in 6 ways 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²(Similar to 6 dies of 8, 6, 4, 2, 1, 1/0 AWG) using rotating heads with a spring loaded locking pin to keep the heads.
  • Durable Material - Made of high quality carbon steel is more sturdy and durable for heavy crimping works.
  • Comfortable Ergonomics Design Handles - Comfortable grip with Anti-slip surface saves strength and improves user's experience.
  • Easy Operating Way - Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.
  • Battery cable crimper with high precision jaw design ensure a tightly connection after crimping with strong work pressure, which this tool has widely application in automatic electronics work.
  • Widely Application in the Copper & Aluminum Cable lug and Non-Welding & Standard Electrical Connection.
Check Stock

Senmit 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8, 3/16 Stainless Steel Cable Railing Fittings, Heavy Duty Head, Come with 8 Pairs Dies and Cable Cutter

  • ...nd Dies won't chip or flake. Dies are made of more hardened 40cr steel, this cable crimper is much better than classic chrome-plated models, for an enhanced performance..
  • 【WIDE APPLICATIONS】: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable crimper will do an outstanding job..
  • 【EASY TO USE】: 4 steps to perfect crimping: install the die set that matches your terminal size, rotate the release valve in order to close it, pump the handle until the resistance felt becomes significant and open the release valve by rotating to the left..
Check Stock