Top Welding Cable Twist Lock Connector

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

4 Pin RGB Male and Female Connector Wire Cable(10 Pack) with 10 x Male 4 Pin Plugs for 5050 3528 RGB LED Light Strip

  • 1.【Easy Installation】Easy to install no tool installation, no welding connection, 5050 4-pin RGB LED strip connector kit, plug and play.
  • 2.【Flexible】LED Strip Jumper Connector are fully bendable and are perfect for extending a run of LED light strip across a gap, around an obstacle, or for making a bend and the other side contacts are open to stick in..
  • 3.【Use Safety】 The pure copper wires inside are tin-plated, ensuring perfect electric conductivity and longer lifespan,and the conductor is made of tinned copper and PVC insulation sleeve, the insulation layer is soft and flexible..
  • 4.【Attention】When operate this connector,it need to be worked into all contacts touching at the right point and then lock them in, these connectors have little dimples to help lock in strip placement, it needed to be so exact in the placement of the strip..
  • 5.【What you get】10 pack 4 Pin RGB Male and Female Connector Wire Cable with 10 x Male 4 Pin Plugs,when you received the item with any problem,please contact with us for after-sale service..
Check Stock

Lenco 05335 International Dinse Type Machine Plug Adapter, Male and Female Connection

  • Welding cable quick connector male-female pair with accessories..
  • DINSE style connection. For AWG wires #6-#4 (16-25 sq mm) with 100Amp-200Amp current rating..
  • You get Two (2) quick cable connector pairs 100Amp-200Amp with accessories at this price..
  • Amazon satisfied customer service & fast ship.Please provide a deliverable address..
  • We are manufactory of welding accessories, if you need a large number of accessories. Please contact us!.
Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 4 DKJ35-50 & DKZ35-50

  • TIG Welding Cable Panel Connector Socket Quick Fitting Dinse-Style, Rated Current: 315amp Wire Section: 35-50mm2 Socket Mounting Size:....
  • 1pcs : DKJ35-50 315A Euro Style Cable Connector-Plug(with Black Color).
  • 1pcs : DKZ35-50 315A Euro Style Cable Connector-Socket.
  • 1Pcs DKJ35-50 Euro Style Cable Connector-Plug (with Red Color).
  • 1Pcs DKZ35-50 Euro Style Cable Connector-Socket (with Red Color).
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

NewFantasia Replacement Audio Upgrade Cable Compatible with Sennheiser Momentum, Momentum 2.0, HD1 Over-Ear On-Ear Headphones 1.2meters/4feet

  • Replacement Audio upgrade HIFI Cable with Twist-to-Lock connector deign Compatible with Sennheiser Momentum, Momentum 2.0 On-Ear & Wireless, Momentum 3 Wireless Noise Cancelling, HD1 Wireless Headphones extension cords.
  • Length: 1.2meters(4ft), package include: 1 replacement cable ( there is no headphone include ).
  • Cable Diameter : 4mm,cable material:the inside cable is OFC wire,the outside cable is Braided Tangle-Free cable.
  • Jack : 3.5mm Male & 6.35mm adapter to 2.5mm Male(comes with the lock the same as the Original cable).
  • This cable is only compatible with Sennheiser Momentum, Momentum 2.0 On-Ear & Wireless, Momentum 3 Wireless Noise Cancelling, HD1 Wireless Headphones(Note: it is not Compatible with other models of Sennheiser headphone, you can choose the correct one fit your headphone to order in our store).
Check Stock

EBOOT 20 AWG JST Plug Connector 2 Pin Male Female Plug Connector Cable Wire for LED Lamp Strip RC Toys Battery, 10 Pairs

  • Total cable length: approx. 210 mm/ 8.3 inch.
  • 2 Pin JST connector, one side for plug the other side for welding.
  • Package including: 10 pairs JST plug connector with cable wire (10 pieces female, 10 pieces male).
  • This JST plug connector is suitable for most mini RC helicopter, LED strip light and good for connecting motor, ESC battery.
Check Stock

Ancable Replacement 4-Pack TRS Male Plug 3 Pole 1/8' 3.5mm Solder Type DIY Audio Cable Connector for Repair Headphones Headset

  • Perfect for replacing worn out plugs for headphones or making a cable to a desired length or replacing a broken connector..
  • Easy to handle,you really don't have to be a professional to do this. Just insert the cables in the holes, twist and lock in place, and only then solder..
  • Suitable for the cable up to 5mm, if your cable is too thin, just use some sleeve to hold it properly to avoid the movement.
  • Wiring diagram: This connector has 3 solder pins,short silver pin --Tips( Left Audio).
  • This listing comes with 10-Pack connectors with some shrinkle tube. it saves you much and makes you always have enough backup.Additional shrinkle tube make it a plus for you.
Check Stock

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

  • 4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

  • Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
  • Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
  • 50-series (35-50mm, #2-1/0, P/N 129527/129526).
  • 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 315Amp (2, DKJ35-50)

  • Cable Panel Connector /Euro Style Cable Connector-plug Fit all TIG Welding and Plasma Cutter Machine.
  • 1pcs DKJ35-50 Connector with Black Color..
Check Stock

Kohree 50 AMP RV Power Cord Cover Twist Lock with Boot Inlet Locking Plug Protector Locking Shore Connector Replacement, 50A 125/250VAC

  • 【Application】: This 50amp twist lock with boot is designed to protect your cord connector, ensuring safe connection for RV, trailer other outdoor applications..
  • 【Durable】: This 50 AMP RV power cord is made of heavy-duty material with strong corrosion resistance, waterproof and weatherproof..
  • 【Ensurance】: Come with UL and CSA Certified. This 50amp locking shore connector is safely used with 50A 125/250V 4-wire cable..
  • 【Convenience】: The 50 Amp Connector is easy to use with colored-coded wire installation. W: white wire G: green wire X: red wire Y: black wire..
  • 【Widely Usage】Includeing weather-proof boot with locking ring. this connector replacement is perfect for RV, trailer, camper, marine, and boat..
Check Stock