Top Welding Clamp Connector

4 Pcs Locking C Clamp Set Locking Pliers with Fixed and Swivel Pads 6 Inch 9 Inch 11 Inch Metal Tools Welding Clamps for Home Farm

  • Locking C Clamp Set: 4 welding clamps are included, including 1 piece of 6 inch locking C clamp with fixed pad, 1 piece of 6 inch locking C clamp with swivel pad, 1 piece of 9 inch locking C clamp swivel pad and 1 piece of 11 inch locking C clamp with swivel pad, meeting your everyday needs.
  • Sturdy to Use: the jaw is forged with carbon steel as a whole, featuring with good toughness.
  • The handle of stamped steel plate, clamping object without deforming.
  • The heat treatment adjusting rod is easy to adjust the suitable size.
  • Additionally, the serrated jaw of locking C clamp has a strong clamping force.
  • Adjustable Design: the locking C clamp is easy to adjust to the appropriate clamping size because of the fine tuning knob design.
  • The quick release handle is convenient and labor saving.
  • Moreover, the spring provides good tensile force.
  • Firm Locking: welding clamps are mainly applied for clamping parts for riveting, welding, grinding and other processing.
  • Since the jaw can generate large clamping force, the clamped objects will not loosen.
  • Essential Supplies: in daily life, the lock C clamp is suitable for electricians and welders to clamp welding boards.
  • And woodworkers can use this metal tool to quickly clamp boards or frames.
Check Stock

ABN L5-50R Connector – 50 Amp Twist Lock Inlet Locking Power Cord Connector Locking Power Inlet Plug 50A 125/250V

  • CONNECT YOUR CABLE: Use your generator, transfer switch, welding equipment, trailer, RV camper power inlet with this ABN Inlet Locking Connector.
  • KEEP OUT PESTS: Replace your power cord with this twist lock connector so the cord can be removed and stored without leaving an opening that mice or....
  • SECURELY HOLD CABLE: This connector comes with strain reliefs that mount inside the base of the connector to hold the cable (clamp for the cord).
  • PERFECT SIZE: Approximate measurement across the face is 2 inches (5.1cm).
  • Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm....
  • Remove housing by loosening face screws and slide over cable (If a weather-resistant boot is used, slide this over....
Check Stock

HitLights LED Strip Connector 2Pin 8mm LED Connector Kit Include Solderless Gapless Connector, 6Inch Jumper Connector, DC Female and Connector, DC Jack Splitter for 3528 5050 LED Strip

  • 【USE FOR 2835 3528 LED Strip】The gapless LED connector, jumper connector, and DC female and connector can use for 8mm 3528 or 2835 High Density led strip light. The DC jack splitter use for all led tape lights..
  • 【LED Connector Kit Package Included】 8 x Gapless Connectors, 6 x LED Jumper Connector, 4 x Female and DC Connector, 2 x 2way DC Splitters. 8mm LED Connector Kit can meet almost all the needs for hanging up LED light strips..
  • 【8mm LED Strip Complete Solution】This is a complete DIY led light strip accessory kit that provides the perfect solution for your furniture, cabinets, and more..
  • 【Easy Installation】Simple installation,connect according to the positive and negative terminals of the connector, simply slot the strip light into connector and clamp the cover. No welding and other processes are required.
  • 【HitLights Quality Warranty】90 days refund, 1 year warranty. You can contact our customer service at any time to help solve installation and after-sales problems (reply within 24 hours)..
Check Stock

hynade Brass T-Style Welding Ground Clamp 300-Amp Wide Jaw Clamp Tool

  • Ground clamp size :7 inches long, 1.18 inches max chin opening.
  • The welding ground clamp adopt high-quality brass material, sturdy structure, strong grip, multifunctional wide-jaw grounding clamp.
  • The clamp tool suitable for most grounding situations, specially designed for heavy-duty high-current welding applications/MIG/MMA/TIG/plasma welding/cutting machines.
  • Large contact surface area provides good cable connection and positive grounding.
  • If have any questions, please contact us and we will provide you with 100% satisfactory service.
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

Soldering Helping Hands Clamp, NOEVSBIG 4 Soldering Arms with Adjustable Vise Clip, PCB Third Hand Holder for Electronics Repair, DIY Arts Craft Hobby Soldering Aid

  • won't tip-off: This soldering helping hands base is a clamp on type to bench or tabletop, features soft rubber clamp pad providing more tighter slipping-free position, does not occupy your extra tabletop or bench space. Fits any bench up to 2.75 inches thick..
  • 4 Precision Alligator Clips：360° rotating clamps for various sized components and boards, perfect for holding circuit boards, wires, motors and more..
  • Flexible arm：Y-shaped flexible arm, light weight, pressure resistance, good stability It can be used universally, perfect for computer boards repairer/ jewelry makers/ miniature makers/ arts crafts hobbyists/welding reworker and so on..
  • Various Usage Third Hands：Use for any electronic, soldering, crafting, painting, replica, figurine and hobby work - or any precision project that requires extreme accuracy, such as model airplane repair, easy to clamp the solder and operation. Best gifts for hobbyists and DIY crafts..
  • 2022 new upgraded helping hands clamp, the end of the soldering arm adopts a sturdy metal connector, which is more closely matched with the table-clamp, not slip teeth, and lasts longer..
Check Stock

ESPEEDER 3.0 Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 3.0" OD Pipe to 3.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs.....
  • The lap joint clamps 3.0" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat....
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without....
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" lap joint band clamp, you can feel free to contact us via....
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock