Top Welding Deformation

Tefuawe 2×4 1/4 Auto Darkening Welding Lens, Low Amps 5A Tig, Shade 10, Ultra Clear, Cool Blue Color for Pipeliner and Pancake Welding Hood

  • Super thin at 0.19”, fits in all 2 x 4-1/4-Inch welding hoods..
  • View low amps TIG without flicker, min. rating 5A. High temp. resistant housing reduces lens failures due to heat deformation, meet most needs of industrial use..
  • Superior solar panel and arc sensors for more consistent welding experience and increase lens life. Tefuawe exclusive optics system enables stably capture dynamic arc when you work on different welding applications and workplaces to ensure more efficient working..
  • High-definition view for precision arc recognition and higher-level welds. Tefuawe True Color Lens technology with light state 2.5 allows welders to experience a brighter and more natural view. They don’t have to flip up the helmet frequently before, during and after welds, highly increasing the productivity with less rework..
  • Our worry-free 12-month warranty, and friendly lifetime customer service, 24/7 standby..
Check Stock

AUTOSAVER88 4 Inch Inlet Exhaust Tip, 4' Inlet 6' Outlet 15' Long Chrome Polished Finish Stainless Steel Universal Exhaust Tail Tip for 4' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt On, Silver

  • Dimension: standard 4″ x 6″ x 15″(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, the chrome polished finished offer your car with a a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

Tefuawe 2x4 1/4 Auto Darkening Welding Lens, Low Amps 5A Tig, Shade 11, Ultra Clear, Cool Blue Color for Pipeliner and Pancake Welding Hood

  • Super thin at 0.19”, fits in all 2 x 4-1/4-Inch welding hoods..
  • View low amps TIG without flicker, min. rating 5A. High temp. resistant housing reduces lens failures due to heat deformation, meet most needs of industrial use..
  • Superior solar panel and arc sensors for more consistent welding experience and increase lens life. Tefuawe exclusive optics system enables stably capture dynamic arc when you work on different welding applications and workplaces to ensure more efficient working..
  • High-definition view for precision arc recognition and higher-level welds. Tefuawe True Color Lens technology with light state 2.5 allows welders to experience a brighter and more natural view. They don’t have to flip up the helmet frequently before, during and after welds, highly increasing the productivity with less rework..
  • Our worry-free 12-month warranty, and friendly lifetime customer service, 24/7 standby..
Check Stock

AUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3' Inlet 4' Outlet 12' Overall Length Stainless Exhaust Tips Powder Coated Finish Tailpipe, Universal Fit for 3' O.D. Tailpipe, Rolled Edge, Bolt/ Clamp On

  • Dimension: standard 3″ x 4″ x 12″(inlet, outlet, and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the Black Powder Coated Finish offer your car with a elegant and mysteriou appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 3 Inch Exhaust Tip, 3' Inlet 4.5' Outlet 9' Overall Length Chrome-Plated Finish Tailpipe Stainless Steel Exhaust Tips for 3' O.D. Tailpipe, Rolled Edge Slant Angle Cut, Bolt On, Universal

  • Dimension: standard 3″ x 4.5″ x 9″ (inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel， our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, the chrome-plated finish would give your car a new & sporty appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 9' Overall Length Chrome-Plated Stainless Steel Exhaust Tail Tip for 2.5' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt-On

  • Dimension: standard 2.5″ x 4″ x 9″(inlet, outlet, and overall length).
  • universal fits for vehicles with 2.5-inch outside diameter exhaust tail pipe(please make sure the outside diameter of your car tailpipe is 2.5″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated finish offers your car with a bright shine and nice appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

2' Performance Muffler, 3' outlet N1 Burnt, 14.6' overall length Exhaust Tip.

  • 2" Performance Muffler, 3" outlet, 14.6" overall length..
  • Stainless Steel Construction For Lifelong Protection..
  • Protect Your Original Pipe From The Sun and Rain, Avoid Rusting and Deformation..
  • Welding Is Required. Professional Installation Is Highly Recommend..
Check Stock

20mm Flat Welding Nozzle Tips for PVC Floor 40mm Weld Nozzle Plastic Welder Tip for Hot Air Tourch Gun Soldering Supplies Accessory 1Set

  • Standard Material: Made of stainless steel alloy with good corrosion resistance, good plasticity and high strength..
  • Specific Features: The nozzle have long life, heat resistance, high temperature resistance, and more resistant to dirt..
  • Nice Quality: Low temperature strength and mechanical properties make the poduct not easy to rust and oxidize deformation..
  • Widely Range: This hot air welding gun nozzle is used for PP, PVC and other plastic plates welding, meeting almost needs..
  • Easy & Safe: The product is convenient and practical to use with high quality, fine workmanship bring smooth surface..
Check Stock

AUTOSAVER88 Adjustable 1.5-2.0 Inch Inlet Exhaust Tip, 1.5"-2.0" Inlet 3.5" Outlet 9" Long Black Powdercoat Exhaust Tail Tip with 3-Bolts Adapter Fit 1.5"/1.75"/2.0" Outside Diameter Tailpipe, Bolt On

  • ...3.5" x 9" (inlet, outlet, overall length).
  • Only universal fit for vehicles with 1.5"/1.75"/2.0"outer diameter exhaust pipes (Please make sure the outlet outer diameter of your vehicle tailpipe is between 1.5-inch and 2.0-inch before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the black coated finish would decorate your car with an elegant & mysterious appeal.
  • Easy installation: 3 Bolts on design makes it super easy to fasten to your exhaust pipe with M10 wrench, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE....
Check Stock

PCE Universal USB Game Joystick Circuit Board, Arcade Rocker Circuit Board Controller Control Board Assembly Support Laptop For Windows 98/ME/XP/Vista

  • 【High Standard】This joystick circuit board is formed without deformation, and the cutting surface has no burrs, which meets the standard..
  • 【High Performance】Solder joint does not stick, no virtual welding, full, smooth, work with high performance. The surface of the circuit board is very clean, the handwriting is clear, easy to recognize..
  • 【Newest Technology,】This arcade rocker arm circuit board uses the latest technology, the entire network's unique Accuracy technology SMD electronic board. Product is better..
  • 【Plug and play】Plug and play, do not need to install the driver. High Accuracy material, environmental protection, fire resistance, high temperature, deformation resistance..
  • 【After Sales Service】If there are any using problems or unsatisfactory with our products, please feel free to contact us, our professional customer service team will consult the issues with sincerity. Thanks for purchasing from us..
Check Stock

4.9' to 7.8' Aluminum Adjustable Trailer Ladder Rack Capacity 400 LBS for Enclosed and Open Trailers Vans Cargo Trucks Pickups

  • Wide Fitment & Function: This ladder roof rack can compatible with any size of enclosed trailers. It will prevent your belongings from sliding off, such as ladders, lumber, pipes, and other long materials..
  • Adjustable Design: Size: 4.9’ to 7.8’. Our ladder roof rack is designed to cater to a variety of trailer sizes, including any size of enclosed trailers. Triangular structure at the welding, more stable, more weight bearing, will not easily shake and deformation..
  • Heavy Duty Construction: This ladder roof rack is made of extruded aluminum, with 4 stainless steel screws per side mount for stronger construction. Upgraded welding also adds strength and durability..
  • Surface Finish: Oxidation treatment forms a protective film for rust prevention. It will not only increase service life of the rack, but also improve the appearance of your vehicle..
  • Installation: Our ladder roof rack is engineered to be a direct bolt-on installation. Instruction and necessary installation accessories are included..
Check Stock

LCGP 3' Inlet Universal Exhaust Tip, 4' Outlet - 5' Long, Stainless Steel Double Wall Angle Cut

  • 3 inch Inlet Universal Exhaust Tip , Double Wall Angle ,Stainless Steel,4" Outlet 5" Overall Length..
  • Surface Finished:Polished & Tig welding Exhaust Tip.
  • Made of high quality T304 stainless steel for long-lasting durability..
  • Protect your original pipe from the sun and rain, avoid rusting and deformation..
  • Installation Type: Weld-on. Professional Installation is recommended..
Check Stock