Top Welding Electrode Sharpeners

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Denso (5304) IK20 Iridium Power Spark Plug, (Pack of 1)

  • 0.4 mm iridium center electrode: world's smallest diameter that maximizes firing potential.
  • U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching.
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode.
Check Stock

Denso (5341) ITV24 Iridium Power Spark Plug, (Pack of 1)

  • 0.4 mm iridium center electrode: world's smallest diameter that maximizes firing potential.
  • U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching.
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode.
Check Stock

Denso (5340) ITV22 Iridium Power Spark Plug, (Pack of 1)

  • 0.4 mm iridium center electrode: world's smallest diameter that maximizes firing potential.
  • U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching.
  • DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode.
Check Stock

200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

  • GREAT FOR most Arc, MMA, Hand Stick welding jobs.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with..
  • MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections..
Check Stock

E6013 - General Purpose/Mild Steel - Welding Electrode/Rod - 14" x 1/8" (PACK: 44 LB)

  • All-position, mild steel electrode for welding light to medium-gauge steel. Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills.
  • Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage.
  • One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities.
  • This electrode has a soft, steady and quiet arc that produces very little smoke or spatter.
  • Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters..
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

STINGER Stv002 Electrode Holder Insulated

  • V Securely Holds Electrode, Ergonomic Comfortable Rubber Handle.
  • Amperage: 0 - 350, Electrode Capacity: 5 MIL / 3/16", Cable Capacity: 1/0 ga..
  • Eliminates Arc Burns From Rod "Popping" Out.
  • Molded Thermoset insulating cover set meeting the requirements of your welding projects.
  • Most Heavy Duty Welding Electrode Holder on The Market, Made In The USA.
Check Stock

Baluue TIG Welding Tungsten Electrodes Ground Finish Welding Rods Thoriated Electrodes for WP

  • lanthanated tungsten rods Multiple choices for your high-quality welding..
  • lanthanated electrode Pure Tungsten forms a clean, balled tip when heated and provide great arc stability for AC welding with a balanced wave..
  • Welding Tungsten Electrode Rod Good mechanical cutting performance, good electrical conductivity, easy operation and long service life..
  • tig tungsten Smallest electron emission, low steam pressure, low resistance and good electrical conductivity..
  • ground annealed Tungsten electrodes Pure tungsten welding electrodes also provide good arc stability for AC sine wave welding, especially on aluminum and magnesium..
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

Welding Electrode Holder 400AMP Heavy Duty Holding Welding Plier Fit for ARC Welder Welding Machine Stick Electrode Clamp of Welding Stinger

  • Welding rod holder Accepts rods up to 5/16''.
  • Electrode thickness:1/16-5/32(1.6-4.0mm) This Electrode holder is made of High Quality Brass material with Insulated Handle for high conductivity and improved cable connections..
  • Well-organized grooved jaw for firm grip of rods indifferent positions.Screw type 400A holder.
  • Well made welding rod holder,Size: 21.5*8*4CM (8.45*3.15*1.55inches).
  • high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...istant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer ....
Check Stock