Top Welding Fits

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

QISF 6 Pcs Magnetic Welding Head, Welding Ground Clamp, Magnetic Welding Support,Strong Magnetism Large Suction,Copper Tail Welding Stability Clamps(2 Sets)

  • 【Feature】-- This magnetic clamp is easy to attach to any smooth metal surface, flat or curved.Strong magnetic grip which can make you welding Work more easy and simple..
  • 【Convenient work】-- Undamage the surface or car's paint,this magnetic clip is very convenient..
  • 【Wide Fits】-- The clamp can also be attached to metal poles, struts, railings or the welding table..
  • 【Material】-- Copper / Insulation Board.
  • 【Package】-- 1Pcs Single Head Magnetic Welding Ground Clamp.
  • 1Pcs Double Head Magnetic Welding Ground Clamp.
  • 2Pcs Copper Tail Welding Stability Clamps.
Check Stock

PatchJoy Premium Tig-Pen Welding Finger Feeder | Tig Rod Finger Feeder | Welding Rod Holder | Best Gifts for Welders

  • ⭐ Efficient TIG Welding Wire Feed Pen, Small and light body, quickly and easily wire feed, can greatly improve working efficiency..
  • ⭐ Comfortable grip, Ergonomic grip of this TIG Wire Feed Pen, can perfectly fits the finger, very comfortable and anti-slip when using..
  • ⭐ This Welding Rod Holder has the process of Anodized surface finish which makes it beautiful and also rustproof..
  • ⭐ For 1.0-3.2mm welding wire, specially designed for TIG welding and argon arc welding, durable in use, not easy to damage..
  • ⭐Quality after-sale service: If you are experiencing quality issues or any problems, please contact our customer service in time. We will solve all your problems for you..
Check Stock

Anti Spatter Welding Spray，Welding Tip Cleaner Anti Spatter Welding Nozzle Gel

  • The weld nozzle Used for polypropylene, polythene, PVC and polycarbonate etc.variety hot melt plastic.
  • Resistant to high temperature, no leakage, convenience to replace, versatility.
  • Fits all popular hot air welding gun,like for LSITE, BAK etc hot air welder.
  • Most popular selling roofing membrane welding nozzles and vinyl flooring welding nozzles.
Check Stock

SÜA Oxygen and Acetylene Gas Cutting, Welding and Heating Set - Medium Duty Torch - Plastic Box - Model: Wyvern V

  • This Set includes: Oxygen and Acetylene Regulators, Medium Duty Torch with Model: 3-101-1 Acetylene Cutting Tip Compatible with Victor, 3 x W-1 series Welding Tips, Heating Tip, 15 feet Twin Hose, Single Flint Striker, Oxyfuel Goggles, Tip Cleaner and Spanner..
  • Can cut up to 6” with additional tips and up to 1” with the provided #1 tip. – Can weld or braze up to 1/2” with additional tips and up to 1/16” with the provided tips..
  • Acetylene Tank Connector: CGA-510 Fits Big Acetylene and Propane tanks EXCEPT Small Sizes MC and B (check all pictures for reference) - Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • Cutting attachment is compatible with Victor series 3 Acetylene and 3-GPN Propane Cutting Tips and Series 100 Handles. The Torch Handle is Compatible with W-1 Acetylene Welding Tips, MFA-1 Series Acetylene and MFN-1 Series Propane Rosebud Heating Tips..
  • This heavy-duty oxyfuel cutting and welding set is manufactured using high quality, strong materials. Durable and sturdy it is perfect for amateurs, DIY´s metalworker, or seasoned professionals, for industrial, farm, or home applications. Can be used on various processes such as welding, soldering, brazing, riveting, cutting, hard-facing and metal heating process..
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
  • Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
  • PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

RX WELD Upgrade version Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Outfit With Portable Tool Bag

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
Check Stock

WeldForce Welding Goggles, Includes Flip Front, 2-Inch x 4-1/4-Inch, 1-Pack, Black (Model: WF-1044)

  • Ultra clear view when not in welding. No need to remove your hood to check welding results. High definition clarity in welding, see clearer weld puddle. Light blue tint in welding, decrease your eyes strain..
  • Low to High sensitivity stepless adjustable for optimal lens performance based on application. Variable shade range of 5 - 13 for personalized shade control and seamless welding application changes..
  • Fits most Pancake and Pipeliner Hoods, in some case have to modify Tigerhoods to fit. 2pcs cover lens as spare parts to protect the lens front and back..
  • The battery life is about 800 hours. Actually the battery only supply the transient power when arc initiate, we advise you store the lens in dry and very dark environment when not use and buy CR1025 batteries as spare just in case, then you could use the lens much longer..
  • 100% money guarantee. If there is any quality problems with our lens, please don’t hesitate to contact us to ask your money back or new replacement, we will provide you the most satisfactory reply within 24 hours..
Check Stock

Leaseek Welding Hood Flame-Retardant Protective Welding Cap with Neck Shoulder Drape Welding helmet accessories,Head Protection for Men & Women Black

  • 【HIGH QUALITY LEATHER 】Made from the durable and pliable, abrasion and heat resistant selected split cowhide leather, this hood is durable, stable....
  • 【CONVENIENCE】This welding hat designed to protect head , eyes and neck.Easy to Store-Can be folded easily, does not account any places..
  • 【DESIGN 】Leather outer is heat and spark proof and an inner cotton lining for maximum comfort..
  • 【QUICKLY AROUND NECK 】Velcro design for easier putting on and taking off..
  • 【WIDE APPLICATION】Welding cap fits all kinds of welding hoods and helmets. It provides good protection for welding, grinding, painting, carpentry,....
Check Stock

SÜA - Ligth Duty Welding/Brazing Torch Handle Compatible with Victor Series J + Welding Tips

  • READ THIS BEFORE YOU BUY: ***This Torch handle fits ONLY Series W-J Acetylene Tips Compatible with Victor - Series W or W-1 Tips WILL NOT FIT THIS....
  • READ THIS BEFORE YOU BUY: ***This Torch Handle has 3/8"-24 (Type "A") Hose Fittings - Twin Hoses with 9/16"-18 (Type "B") Hose Fittings WILL NOT FIT....
  • READ THIS BEFORE YOU BUY: ***Please note that this outfit WILL NOT FIT disposable oxygen and fuel gas canisters. It will ONLY fit model MC Acetylene....
  • This torch has been designed to cover the full range of light-duty welding and brazing needs. Its size and maneuverability makes it ideal for the....
  • Welding Torch Handle, Welding torch handle with 3 welding tips and a full Set that includes.
Check Stock