Top Welding Fixture Table Clamps

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

Cylinder Pneumatic Clamp Air Clamp Hold Down Clamp with U-Bar, GH-12130 Air Toggle Clamp

  • METAL MATERIAL: This pneumatic clamp is made of high-strength metal material, which is anti-oxidation, wear-resistant, strong and reliable.
  • STABLE OPERATION: Built-in air flow control provides smoother operation during repetitive clamping operations than manual clamps.
  • HIGH EFFICIENCY: The pneumatic clamp can shorten test time,and improve production efficiency which reduce labor intensity of workers.
  • WITH U-BAR: Holding screw moves on the U-shaped hold-down bar for larger clearance angle.
  • WIDELY APPLICATION: The pneumatic clamp can be used in welding, fixture, mold and other positions.
Check Stock

Klutch Mobile Welding Workstation 26-Pc Metal Fit-Up Kit

  • 4mm thick table top with fixed position steel top boards featuring 4 separate 20in. x 12in. sections.
  • Standard 16mm dia. holes evenly spaced 2in. apart for exceptional flexibility in fixture setup.
  • Firm grip handle and 4 heavy-duty 3in. swivel casters allow you to easily move the welding table where you need it, while built-in stabilizer feet....
Check Stock

5pcs/ Pack 45 Carbon Steel T Slot Nut M8/M10 Threads Black Oxide Finish for Machines Tool Tables(M8)

  • Made of 45 steel, black oxide finish, features high hardness, high strength, durable in use.
  • Undersized to fit machine table slot case hardened.
  • It is used for T-slot aluminum extrusions to connect other parts.
  • Bottom of T-Slot nut is staked to prevent the stud from protrusion.
  • T-Slot nuts enable the user to add clamps to a fixture without tearing down existing clamps.
Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock

4PCS C-Clamp Stainless Steel Clamps Heavy Duty Bracket for Woodworking Mount, with Wide Jaw Openings

  • Table Clamp Material: It is made of high-quality 304 stainless steel precision casting, the workpiece is compact and has no loose pinholes, rust and scratch resistance, and durable..
  • Clamps Widely Used：Wide range of uses: It is suitable for assembly, fastening, and welding in metal processing and automotive applications.with strong clamping force and easy to use..
  • C Clamp Easy to install: With adjustable positioning screws, it can be easily clamped on any plane, and the screws can be adjusted according to needs, which is convenient to use..
  • Clamps Design：The design of the c-shaped clamp can provide a comfortable use experience, Bandwidth port the design of the clamp can ensure that the clamped object will not be easily deformed, thereby ensuring a firm grip..
  • C Clamps Heavy Duty Size: The clamping range is 16-25mm/0.6-1 inches, there are 3 M8 threaded holes, and the opening is 30mm..
Check Stock

Right Angle Clamp ,90 Degree Corner Clamp with Adjustable Double Handle Corner Clamp for Woodworking the Working of Framing Drilling Welding Doweling Making Cabinet Installing Furniture

  • HIGH QUALITY: The Right Angle Clamps is made of strong aluminum alloy materials, will not rust or crack , and can easily drill diagonal holes to make the joint perfect. At the same time, this fixture can create flush, angular shapes. angle clamp connector suitable for woodworking the working of framing drilling welding doweling making cabinet installing furniture.
  • CONVENIENT AND FAST: Drill inclined quickly and easily to hide the screws in the wooden furniture. 90° drilling angle to ensure accurate screw connection, please note: the max thickness for this angle clamps can fix up to 2.3inches (58mm).
  • EASY TO USE: It works smoothly and has no burrs, and its easy to drill Right Angle to hide screws in wooden furniture, which helps improve work efficiency.
  • Portable & CARRY: Weight 0.34kg small size can be held by one hand, DIY woodworking tools and can realize precise screw connection.
  • CUSTOMER SERVICE:If you have any problem or question of our product, please contact us via e-mail , our Customer Service will respond within 24 hours.
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

YESWELDER Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Suspender Fixture Adjustable Pads Kit(4 Pcs)

  • HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time.
  • EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply.
  • MAGNETIC HOLDERS▶ Magnets on the pad face only.
  • INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps.
Check Stock

Dewalt Adjustable Height Portable Steel Welding Table and Work Bench 18 x 46-inch Tabletop Folding Legs Carrying Handle and Cord Minder

  • Steel construction - durable steel construction with an even distributed weight capacity of 1000-pounds.
  • Mounting options - strategically located slots / post holes for mounting and clamping any shape project.
  • Tabletop or stand-alone - useable folded up atop existing work table or as a 36-inch tall free-standing welding station.
  • Double locking legs - table legs have both spring pin / snap button locks and locking for added security under load.
  • Grounding stud - conveniently located ground stud for connecting grounding clamps and leads.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock