Top Welding Fume Extractor

JFC Nori Fumi Furikake Rice Seasoning 1.7-Ounce Jars Pack of 4

  • Technical Parameter: Voltage: 110V, Efficiency: 99.97%, Power: 80W, Air Volume: 180m³/H, Noise: 58 dBA, Product Size: 37 x 25 x 40 cm/14.56 x 9.8 x....
  • Multi-layer Efficient Filtration: The selected high-quality deodorizing carbons have a better deodorizing effect on the laser-processed plastic....
  • 58 DBA Low Noise: The pure air fume extractor has a built-in noise reduction module with the 58 dBA the lowest volume, which avoids the noise during....
  • User-friendly Detail Design: The well-designed tight buckles distributed on both sides of the smoke air purifier, no smoke & reliable air tightness.....
  • Easy to Install & Disassemble: The cover of the air extractor adopts the detachable design for easy assembly. The instant disassembly and assembly....
Check Stock

Fox Alloy E71T-GS .030\ Flux Core Welding Wire Gasless Mig Wire - 2 Lbs Spool Welding Wire Mild Steel Filler Metal (0.8 mm)

  • 2-lb spool 0.030" gas-less E71T flux-cored ( FCW ) mild steel MIG welding wire with sturdy packaging, and comes with a 0.030'' contact tip.
  • Welding Wire E71T-GS conforms to AWS A5.20 (E71T-GS), AWS A5.36 (E71T14S-AZ-CS3), ISO 17632-A (T42 Z Z V N 1).
  • Flux core welding wire E71T-GS is self shield, no shielding gas needed, single-pass fillet and lap welding, all positional, low welding fume, minimum spatter,Smooth arc action,High feedability,Filler Metal welding wire is easy to weld in indoor and outdoor.
  • Mild steel welding wire E71T-GS is applied in welding of thin plate steel structure, i.e, doors， fence..
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

RIDGID 97457 VF6000 5-Layer HEPA Replacement Filter for 5-20 Gallon Wet/Dry Vacuums

  • The product is 97457 FILTER, HEPA VF6000.
  • The product use for fume and smoke extractor filters.
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station

  • Solder Fume Extractor/Smoke Trap/Smoke Eater/Smoke Filter/Solder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station..
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily..
  • Easy to replace filter, Includes one smoke trap replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz)..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock

Half Facepiece Reusable Respirator， with 2097 filters Against Dust, Particle, Pollen, Lead Paint & Asbestos,Widely Used in Painting, Cement plant，Decorating Carpentry, Welding, Metal Cutting

  • 【Comfortable sealing】-The sealing edge is made of high-quality silicone mixed materials, which fits the face very closely. The soft texture and adjustable headband provide you with a comfortable wearing feeling..
  • 【Dual protection】 The professional half-mask adopts a double filter system, which effectively blocks dust, asbestos, welding fume, metal fume, oily particles, organic vapor odor, and radioactive particles, and the protection efficiency is higher than 99.97%. It is an ideal protection device for your work.
  • 【Longer service life】 Reusable design. The work can be completed without frequent replacement. The package includes: 1 * half mask, 2 * 2097 filter cotton,.
  • 【 Widely used】 scientific work, outdoor work, cement factory, welding, railway, manufacturing, grinding, polishing, sawfly, workshop, eye protection DIY, laboratory, chainsaw worker, construction, desert, electrician, field work, machining, etc. ..
  • 【Satisfactory Service】We are committed to ensuring that you are 100% satisfied. If you have any questions, please contact us directly..
Check Stock

Hanperal 50mm SDS Plus Shank Hole Saw Cutter, Wall Hole Saw Drill Bit for Brick Concrete Cement Stone

  • -Simple operation, easy to use and fast perforated..
  • -This item is made of high quality carbide tipped metal material, durable..
  • -The SDS Plus Shank Carbide Tip Hole Saw Drill Bit suitable for drilling walls, stones, bricks or installation of air-conditioning etc, Oil Fume Exhauster and Sewer Pipeline Hole Open ect..
  • -Using the Electric Hammer of the impact and rotation function on the wall, hollow brick to operate air conditioning holes, pipe holes and so on..
  • -High-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth, precision engage, appearance..
Check Stock

HYDDNice Carbide Steel Wall Hole Saw Shank Hole Saw Cutter Concrete Wall Drill Bit with Wrench - 200mm Connecting Rod,30mm 40mm 50mm

  • The 30mm 40mm 50mm dia wall drill bit is made of high quality chrome vanadium steel,durable and fast perforated in a long life..
  • High frequency welding technology,welding openings is very strong with smooth welding mouth inside and outside.Please pay attention to coolant when operating..
  • Suitable for wall and brick structure to opening hole operation,like red brick and cement..
  • Widely used for installing the air conditioner, oil fume exhauster and sewer pipeline hole open ect..
  • Customer satisfaction is the most important, if you're not satisfied with the product,please contact us by email on Amazon of "Ask a question" button,we'll solve it for you..
Check Stock

CREWORKS Electric Honey Extractor 4 Frame, Honey Extractor Separator Bee Frame Spinner, Honeycomb Bee Frame Spinner, SS Motorized Honey Extractor Beekeeping Equipment Spinner Drum with Stand (4 Frame)

  • Sturdy and reliable structure: The main structure of the honey extractor is made from premium stainless steel and rolled by the seamless welding machine. Premium food-grade polished stainless steel honey drum can resist against rust and wear..
  • High-speed motor: Our tangential extractor has a motor power of 140W and 1.1A. Featuring 1300rpm motor, variable speed option, and high precision bearing, this electric honey extractor has a higher speed and longer service in life..
  • 4-frame Electric honey extractor: This honey extractor can handle 4 standard frames at one time. No matter they are deep, medium or shallow frames, this spinner will do its job perfectly. It is slightly rounded to the inner side in order to protect your honeycombs from breaking. The overall height of the extractor is 44 inches..
  • Honey gate: Honey will flow into the container with a filter through the 2-inch honey gate without efforts. 2 transparent plexiglass covers allow you to observe the extracting process..
  • Easy to install: Simple procedures are needed to set this extractor up. Put the honeycomb in, rotate the crank and honey will be extracted in a short time. It is an ideal choice for small-scale beekeeping or amateur..
Check Stock

CREWORKS Electric Honey Extractor 2 Frame, Honey Extractor Separator Bee Frame Spinner, Honeycomb Bee Frame Spinner, SS Motorized Honey Extractor Beekeeping Equipment Spinner Drum with Stand (2 Frame)

  • Sturdy and reliable structure: The main structure of the honey extractor is made from stainless steel and rolled by the seamless welding machine. Premium food-grade polished stainless steel honey drum can resist against rust and wear..
  • High-speed motor: Our tangential extractor has a motor power of 140W and 1.1A. Featuring 1300rpm motor, variable speed option, and high precision bearing, this electric honey extractor has a higher speed and longer service in life..
  • 2-frame Electric honey extractor: This honey extractor can handle 2 standard frames at one time. No matter they are deep, medium or shallow frames, this spinner will do its job perfectly. It is slightly rounded to the inner side in order to protect your honeycombs from breaking..
  • Honey gate: Honey will flow into the container with a filter through the honey gate without efforts. 2 transparent plexiglass covers allow you to observe the extracting process..
  • Easy to install: Simple procedures are needed to set this extractor up. Put the honeycomb in, rotate the crank and honey will be extracted in a short time. It is an ideal choice for small-scale beekeeping or amateur..
Check Stock

VEVOR, 4 Frame Electric Honey Extractor

  • Powerful Electric Motor: This honey extractor features a 140 W 1.1A, 1300rpm motor with variable speed options, high-precision bearing, so it has higher rotation speed and low noise, saving your time and labor..
  • Premium Stainless Steel: The motorized honey extractor body is made of high-quality stainless steel, wear-proof and secure for your long-lasting use. With the sleek finish and seamless welding construction, it is easy to clean after use..
  • 4-Frame Capacity: Our electric honey extractor equipment handles up to 4 frames at once time. Fit for frames of 9.2 x 17.3 x 19.2 in /23.5 x 44 x 48.8 cm. The enclosed gear upon the frame will not contaminate the honey..
  • Humanized Design: The 2" honey gate at the bottom of the tank allows the honey to flow at your will. Two clear perspex lids allow inspection of the extraction process while harvesting the honey. And the adjustable height fits your different needs..
  • Easy to Assemble & Use: Assembling our apiary centrifuge equipment is really easy with simple steps. Just put beehive frames in and plug in to start. It is ideal for the hobbyist or small apiarist..
Check Stock

SXDOOL Solder Smoker Absorber Remover Fan with Speed Controller,Fume Extractor Smoke Prevention,120mm 120V Cooler Adjustable

  • High airflow cooling fans designed for Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber.
  • Features a fan speed controller so you can optimize the airflow and noise for your application..
  • Dual ball bearing design allows the fan continuous operation 24/7 without too much of dust and high temperature concern and have a lifespan of 50,000....
  • Comes with 3pcs 120mmX120mmX3mm Active carbon filters,easy to replace. The filter is made of special foam with refined activated carbon, which has....
  • Great for mobile phone maintenance, great for soldering station work,electronics, arts and crafts, stained glass work, ..
Check Stock

Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station..
  • It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours..
  • Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption....
  • It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work..
Check Stock