Top Welding Gas Kit

RX WELD Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case-Portable Cutting Torch Set Welder Tools Black

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
Check Stock

Mig Welding gun accessory 0.035 kit for Lincoln Magnum 100L or Tweco Mini/#1 Mig gun 20pcs Contact Tips 11-35 0.035 + 2pcs gas nozzles 21-50 1/2 + 2pcs gas diffusers 35-50

  • Mig Welding gun accessory 0.035" kit with contact tip,gas nozzle,gas diffuser for Lincoln Magnum 100L & Tweco Mini/#1..
  • Including:20pcs mig welding Contact Tips 11-35 0.035" + 2pcs gas nozzles 21-50 1/2" + 2pcs gas diffusers 35-50.
  • Fits for Tweco Mini/#1 and Lincoln Magnum 100L K530 series Mig welding guns.
  • Amazon satisfied customer service & fast ship.
Check Stock

Weller Mini Butane Torch - WLTBUM2

  • 【Durable】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear.Come with automatic ignition device.
  • 【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can up to 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Use】 Install the end of the welding torch on the gas cylinder, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Ergonomic Design 】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Operation And Tips】Use only MAPP and propane gas.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • Before attaching torch to gas cylinder,check and ma....
Check Stock

funchic Mini Welding Gun Micro Gas Little Torch Welding Soldering Kit with 5 Interchangeable Torch Tip

  • Micro Mini Little Torch Soldering Welding With 5 Tips,Funchic Hoses Mini Gas Little Torch Welding Soldering Kit for Jewelers Jewelery.
  • Flexible hoses connect to any standard pressure regulator..
  • This torch is easily maneuvered in areas impossible to reach with conventional torches..
  • Used with acetylene, hydrogen, propane, propylene, map, and natural gas..
Check Stock

ALLY Tools Professional Large and Small 13 Wire Oxy-Acetylene Tip Cleaner Set for Cleaning Welding Cutting Nozzles/Tips Gas Orifices Carburetors Spray Guns Paint Guns Sprinklers and Shower Heads

  • [THE PERFECT COMBO]: Kit includes one 130mm (5”) and one 75mm (3”) Tip Cleaner. Each Welding Tip Cleaner includes 13 Wire Files (49 to 77) at different lengths (4-1/3” or 2-1/3”). Includes a flat file..
  • [MADE FOR WELDING]: Perfect as a Torch Tip Cleaner for Cleaning Gas Orifices..
  • [QUALITY]: Wires are Made from Quality Stainless Steel and Enclosed in a Sturdy Aluminum Casing..
  • [VERSATILE]: This welding tip cleaner works well as a carb cleaner, paint gun cleaning kit, small engine cleaner, jet cleaner, spray gun cleaning kit, and carburetor cleaner..
  • [CLEANS DEBRIS]: Great Nozzle Cleaner and Removes Debris from Tips and Small Holes. Perfect for clogged natural gas/propane jets and engine carburetors..
Check Stock

Heavy Duty Cutting Torch, Oxygen Propane/Acetylene Welding Torch, Flame Torch Handle & Cutting Attachment with Propane Tip

  • 【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
  • 【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
  • 【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
  • 【FULL SET】Full kit include torch handle，cutting torch and propane torch tip. Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
  • 【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Check Stock

Mig Welding gun accessory 0.030 kit for Lincoln Magnum 100L Tweco Mini/#1 Mig gun 20pcs Contact Tips 11-30 0.030 + 2pcs gas nozzles 21-50 1/2 + 2pcs 35-50 welding diffuse

  • Mig Welding gun accessory 0.030" kit tip-nozzle-diffuser with contact tip,gas nozzle,gas diffuser for Lincoln Magnum 100L & Tweco Mini/#1..
  • Including:20pcs Contact Tips 11-30 0.030" + 2pcs gas nozzles 21-50 1/2" + 2pcs 35-50 welding diffuser.
  • Fits for Tweco Mini/#1 and Lincoln Magnum 100L K530 series Mig welding guns.
  • Amazon satisfied customer service & fast ship.
Check Stock

Devardi Glass Lampworking, Blowing, Beadmaking COE 104 Beginner Starter Kit - Intermediate

  • 【SPECIFICATION】The highest welding temperature can reach over 1700 degrees. Rugged braided dual line hoses is fit for any standard pressure regulator.The hose has special domestic oxygen and butane (liquefied gas) connectors, which can be directly connected to the torch connector..
  • 【MEET DIFFERENT NEEDS】It is equipped with 5 tips. The size of each tips is different, you can choose different tips according to your needs. Tips provide a wide range of flame lengths and heat output for various metals and thickness..
  • 【WELDING TORCH KIT】This jewelry welding torch is easily maneuvered in areas impossible to reach with conventional torches. Used with acetylene, hydrogen, propane, propylene, map, and natural gas. Great tools for the welding of gold, silver, copper, etc..
  • 【WIDELY APPLICATION】Suitable for welding all kinds of precision products such as goldsilverK goldplatinumpalladium pperlead tin alloy and some other crafts such as welding, jewelry repair and construction, hobbyists, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing..
Check Stock

TOAUTO Heavy Duty Cutting Torch, Oxygen Propane Acetylene Welding Torch Flame Torch Handle & Cutting Attachment with Propane Tip

  • 【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
  • 【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
  • 【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
  • 【FULL SET】Full kit include torch handle, cutting torch, 1pc propane tip and 1pc acetylene tip （To meet different requirements) . Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
  • 【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Check Stock

Mig Welding gun accessory 0.035

  • Mig Welding gun accessory kit 0.035" for Miller Millermatic M-10, M-15 and Hobart H-9,H-10 with contact tip,gas nozzle,gas diffuser.
  • Including:20pcs Contact Tips 000-068 0.035" + 2pcs gas nozzles 169-715 1/2"+ 2pcs gas diffusers 169-716.
  • Fits for Miller Millermatic M-10, M-15 and Hobart H-9,H-10.
  • Amazon satisfied customer service & fast ship.
Check Stock

YESWELDER MIG Welding Gun Kit .035 Tip-Nozzle-Diffuser-Adapter for Lincoln Magnum 200/250 Tweco #2

  • MIG welding gun accessory 0.035" kit tip-nozzle-diffuser-adapter for Lincoln Magnum 200/250 & Tweco #2..
  • Fits Lincoln Magnum 200/250 & Tweco Professional #2 MIG welding gun or equivalents..
  • 2-pcs Adjustable Slip-On Gas Nozzle 22-50 (1/2"), 20-pcs contact tips 14-35 (0.035"), 2-pcs gas diffusers 52 and 2-pcs nozzle adapters 32.
  • Please see all listed pictures to check your MIG gun details for part compatibility..
Check Stock

AWLOLWA Oxygen Acetylene Torch kit Medium Duty Cutting Torch and Welding Kit (Blue)

  • 【Oxy Acetylene Torch Kit】 The welding & cutting torch set are made of high-quality materials, which are durable to be your long-term choice. Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Precision Design】The oxy acetylene torch kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【Easy To Use】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • 【Versatile Use】Oxygen and acetylene fuels can be used in various types of portable welding, rivet cutting, soldering, brazing, surface hardening and metal heating processes.....
Check Stock