Top Welding Quick release Clamps

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

REDSHIFT Extra Handlebar Clamp Set for Quick-Release Aerobars, Bicycle Aero Bar Mount Clamps, Bike Accessories, Components and Parts

  • LETS YOU SWITCH YOUR AEROBARS – The Extra Handlebar Clamps are useful bike accessories that let you quickly switch the Redshift Quick-Release Aerobars (sold separately) between multiple bikes in seconds..
  • ATTACH AND REMOVE IN SECONDS – Attach or remove the Redshift Quick-Release bike aero bars (sold separately) in seconds, without using any tools. A patented clamping mechanism ensures quick and easy tool-free attachment of the aerobars..
  • CLAMPS SECURELY ON THE HANDLEBAR – These aero bar mount clamps will secure the aerobars in the same position every time. A secondary safety slot prevents them from accidental release..
  • COMPATIBLE WITH – Compatible with 31.8 mm Handlebars. For 26.0mm and 25.4mm handlebar sizes, handlebar shims are required to adapt this product to fit (sold separately)..
  • SUPERIOR QUALITY AND SATISFACTION – We stand behind the products we sell and want you to have an amazing experience with your Redshift bike parts and components. All our products come with a lifetime warranty..
Check Stock

Kidde 420118 Mounting Bracket for Mariner Dry Chemical Fire Extinguishers 2.5 lb thru 2.75 lb M5, M10, M110

  • 【Fits Almost All Automotive】Fire extinguisher mount vehicle fit for Jeep Wrangler JK JKU (07-18)/ JL JL (18-19)/ LJ (04-06)/ TJ (96-06)/ YJ (87-95).
  • UTV: Honda/ Yamaha/ Polaris/ Kawasaki/ Can Am/ Kymco/ Arctic Cat and Bobcat. Also fit for some boat, some motorcycle and tractor with roll bar..
  • 【Quick Release Fire Extinguisher Mount】Quick release to easily get your fire extinguisher out when needed. One hand pull the knob out horizontally, the other hand pull the fire extinguisher vertically. And easy to install. Please contact us if you have any question..
  • 【Package Include】1 x fire extinguisher mount vehicle made of 6061-T6 billet aluminum ( base and separable holder) and 8 x clamps. ❤ The clamps have black rubber sleeve to protect your hands from scratching. ❤.
  • 【8 Clamps】The 4 lengths of 8 clamps are 5"-9.4"/ 7.4"-11.8"/ 9"-13.3"/ 14.5"-16.5". You can choose 4 clamps of appropriate length to fix the roll bar and fire extinguisher respectively. The others 4 clamps for spare using..
  • 【Fire Extinguisher Bracket】The base of fire extinguisher mount is a layer soft felt cloth to avoid scratching the roll bar, at the same time make the fire extinguisher bracket is more firmly installed on the roll bar..
Check Stock

AUFER Quick Release Aluminum Roll Bar Fire Extinguisher Mount Holder Compatible with for Jeep Wrangler Gladiator UTV Polaris RZR Can-Am with Pillar Support 1-10Lb Extinguishers ,8 Mounting Clamps

  • 1.【Material】Made of premium and sturdy aluminum,instead of tear-apart-easily cloth.Unique appearance make it is unique with others..
  • 2.【Fitment】 Compatible with for Jeep Wrangler JK JKU 2007-2018➤JL JLU 2018-2019➤LJ 2004-2006➤TJ 1996-2006➤YJ 1987-1995➤Gladiator JT....
  • 3.【Release】Quick.One hand pull the Red knob out horizontally, the other hand pull the fire extinguisher vertically.It's easy and quick to release....
  • 4.【Installation】Easy.Attach the fire extinguisher bracket to the roll rack by adjustable rings,no drilling.The fire extinguisher bracket has four....
  • 5.【Package】Includes 1x mount and 8 mounting clamps (2 clamps:40-70mm,2 clamps:65-89mm,2 clamps:78-101mm,2 clamps:80-120mm ).Shipping by....
Check Stock

MIKMAYTOO Small Quick Release Horizontal Toggle Clamp Hold Down Hand Tool 201A Hand Tool 60 lbs / 27kg (201-8PACK)

  • 【Packing type】8 PCS hand tool Toggle Clamp GH-201 non-slip red horizontal clamp quick release tool.
  • 【Holding Capacity】27Kg / 60Lbs, solid grip.
  • 【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • 【CLAMP SPECS】7.5 x 2.5 x 1.7cm/ 3" x 1" x 0.7"(L*W*H).
  • Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
  • 【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

MIKMAYTOO Push Pull Action Toggle Clamps 6 PACK 301AM Latch Anti-slip Hand Tool 110Lbs Holding Capacity Quick Release Woodworking Clamp … (301AM)

  • 【Packing type】6 PCS hand tool Toggle Clamp GH-301AM non-slip red Vertical clamp quick release tool. 100% manufacturer money back.
  • 【Holding Capacity】90Kg / 198Lbs, solid grip.
  • 【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • 【Size】190 Degree Handle Opening Angle Plunger Stroke: 16mm/0.6"..
  • 【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

REDSHIFT Aerobars Bike Handlebar Shim Kit, Bicycle Handle Bar Clamp Shims, 26.0mm to 31.8mm

  • FIT YOUR AEROBARS TO YOUR HANDLEBARS – These Bike Handlebar Shims are useful bike accessories that allow you to easily clamp the Redshift Quick Release Aerobars to your 26.0mm handlebars..
  • FITS THE REDSHIFT QUICK-RELEASE AEROBARS – This handlebar shim kit is designed to work with REDSHIFT Quick-Release Aerobars. They adapt the 31.8mm clamps to fit your 26.0mm handlebar..
  • EASY TO INSTALL IN MINUTES – Place the bicycle handlebar adapter shims inside the handlebar clamps. Once installed, the shims are essentially invisible..
  • SUPERIOR QUALITY AND SATISFACTION – We stand behind the products we sell and want you to have an amazing experience with your Redshift bike parts and components. All our products come with a lifetime warranty..
Check Stock

90 Degree Corner Clamps for Woodworking - 4PCS Angle Clips for Wood-Working | Welding | Photo Framing | Drilling | Cabinets - Pro Right Angle Clamp Set of 4

  • [Corner Clamps for Woodworking Set of 4] This pro corner clamp set can quickly and easily fix the required shapes such as square, triangle, T shape, etc. The high spring tension can hold the plates in place when they are screwed to ensure that your clamping work is done conveniently and efficiently..
  • [Easy Operation] These angle clamps for woodworking are easy to use, which can save you time and reduce workload. And These corner clips are sturdy and non-slip, which is helpful for quick installation and fixation. Whether for carpentry, welding, photo frames, or DIY use, these 90-degree right-angle clamps are very useful tools..
  • [Scope of Application] Our clamps for the woodworking sets are very suitable for drilling holes, making cabinets and photo frames, etc. In addition, these woodworking clamps can also be used to install furniture and make various small wooden boxes..
  • [One-handed Operation] The packaging accessories include 4 90-degree angle clamps. Open this cabinet clamps with one hand, and the other hand can freely clamp the workpiece..
  • [The Best Choice for DIY Lovers] The adjustable corner clamps will be the best gift for woodworkers and DIYers. You can also use this corner clip to make handmade items with your family..
Check Stock

Adjustable Fire Extinguisher Mount Holder with 4 Clamps Quick Release Fire Extinguisher Bracket for Wrangler JK TJ CJ Rubicon JL UTV Polaris RZR Ranger

  • 1.【Fitment】- KOLEMO Roll Bar Fire Extinguisher Mount Compatible with for Jeep Wrangler JK JKU 2007 to 2018,Compatible with for JL JLU 2018 to 2019,Compatible with for LJ 2004 to 2006,Compatible with for TJ 1996 to 2006,Compatible with for YJ 1987 to 1995.Also Compatible with for UTV such as Honda,Yamaha,Polaris,Kawasaki,Can Am,Kymco,Arctic Cat and Bobcat.Also can used at garden,home and office etc..
  • 2.【Material】- This fire extinguisher Holder is made of premium and sturdy aluminum,instead of tear-apart-easily cloth or plastic,more durable and sturdy..
  • 3.【Quick Release】- One hand pull the Red knob out horizontally,the other hand pull the fire extinguisher vertically.It's easy and quick to release fire extinguisher..
  • 4.【Easy to Install】- Attach the fire extinguisher bracket to the roll rack by adjustable rings,no drilling.The fire extinguisher bracket has four protruding iron beads to prevent the fire extinguisher from falling off..
  • 5.【Packages】- 1x mount (base and separable holder) and 8 mounting clamps (2 clamps:40-70mm,2 clamps:65-89mm,2 clamps:78-101mm,2 clamps:80-120mm).♥♥♥We offer One years warranty for this Adjustable Fire Extinguisher Mount Holder..
Check Stock

WORKPRO Mini Bar Clamps for Woodworking, 6\(2) and 4-1/2\(2), 4-Piece One-Handed Clamp/Spreader, Light-Duty Quick-Change F Clamp with 150lbs Load Limit

  • ...ylon body and high-quality hardened steel bars provide great impact resistance, which is totally able to withstand the heavy use expected on construction sites.
  • Eye for Details: Non-marring removable and replaceable pads feature flexible material and non-slip texture, which enhances the overall clamping force. Quick-release latch allows you to adjust and lock the wood clamps simply and quickly. Somewhat surprising, the ergonomically-designed handle and dipping plastic on the quick-release latch are both for customers' comfort.
Check Stock

12 Pack 4 Inch Bar Clamps for Woodworking Quick Grip Clamps Trigger Clamp One Handed Ratchet Clamp, Mini Small Bar Clamps for Craft Wood Clamps for Gluing

  • 【Bar Clamp 4''】Wood clamps woodworking capacity up to 4 inch. Throat depth: 1.25inch..
  • 【Powerful Clamping Force】4 inch trigger clamp with up to 65lbs of squeezing force and a metal ratcheting mechanism, suit for light duty works, woodworking F clamps and DIY carpentry..
  • 【Clamp And Spreader】4 inch quick grip clamps for woodworking is used in two ways, clamp or spreader. Easy to reverse jaws can turns clamp into spreading clamp or stretching tool..
  • 【One-Handed Clamp】One handed release F clamp is adopted new grip and trigger design provides simple, you can operate with one hand. Spreader bar grip is comfortable to hold, press quick-release button to slide arm into desired length..
  • 【Durable And Sturdy】Mini bar clamps are made of nylon body and high-quality hardened steel that provide great impact resistance..
Check Stock