Top Welding Square Ruler

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Creative Grids Quilt Ruler 6-1/2in x 12-1/2in - CGR612

  • ...4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance..
  • Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge..
  • Use these markings to square up flying geese units.
  • squares set on point or mark cross-hatching. The ruler also features a 30degree/60degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders..
  • The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features..
Check Stock

Combination Square 12 Inch, Stainless Steel Inch/Metric Measuring Ruler, Adjustable Sliding Protractor Level Measure Measuring Set 4-Piece 4R Combination Square, Measuring Tool for Wood Working

  • 【IDEAL MEASURING TOOL】The combination square is made of high-quality stainless steel, which can be used conveniently when you need to measure. Rugged, multi-angle measurement, very suitable for measuring the internal and external angles of objects. The gear frame is made of high-quality zinc alloy and has a long service life..
  • 【HIGH PRECISION MEASUREMENT】This combination square ruler has a measurement range of 0-180 degrees and an accuracy of 5’/0.08 degrees. This combination square ruler is a must-have tool in your toolbox. Allows you to quickly and accurately mark and measure in various applications..
  • 【EASY TO USE】This carpenter square adopts a nut fixing body, which can be removed and used. Allows you to quickly and easily draw lines for cross-cutting, beveling, splitting, arranging any angles, and finding the centerline of a circle, pin, or rod. This is essential in any woodworking or metalworking project..
  • 【SCOPE OF APPLICATION】This combination square can measure the depth of shallow cutting and joinery, calibrate and set the table saw, and measure the height of the router’s drill bit. It is suitable for engineering surveying, wood processing, home maintenance, and decoration. Both beginners and experienced can easily use it..
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Creative Grids Quilt Ruler 3-1/2in x 6-1/2in - CGR36

  • ...4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance..
  • Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. These 45 degree lines cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units.
  • squares set on point or mark cross-hatching..
  • The ruler also features a 30 degree/60 degree angle. White horizontal and vertical lines are printed on the rectangle so the center of the ruler is easily distinguishable. Use these lines to fussy cut stripes and borders..
  • The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!.
Check Stock

Brown & Sharpe 599-694 US Standard Gage

  • The front side is standard unit, and reverse side is unit..
  • Compact size and light weight, more convenient to operate..
  • The scale of the ruler is marked by laser, and the scale is clear and easy to read..
  • Made of stainless steel, not easy to rust, long service life..
  • Products are widely used in the field of welding measurement, suitable for products and components with high welding quality requirements, such as boilers, pressure vessels, etc. ..
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

IRWIN Tools Tri and Mitre Square (1794473),Silver

  • 【High quality】: Mecurate rafter square made of precise and durable CNC-machined aluminum alloy, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. The angle conversion table offers convenience of using the right number to work with. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock

Aluminum Alloy Woodworking Square Size Measure Ruler, welltop 3D Mitre Angle Measuring Tool, Multifunctional 45/90 Degree Angle T Ruler Gauge, for Three Dimensional Items Measuring Timber, Pipes

  • 【Multifunctional 3D Mitre Angle Ruler】The angle ruler has more than 10 functions, 10-in-1, which are: square, protractor, dovetail template, circular hole, parallel line, vertical line, drilling positioning, T-shaped dovetail joint, 45° angle, 90° angle, ten common angles to meet your different needs..
  • 【Tough & Durable Material】The 3D mitre angle measuring tool is made of high quality aluminum alloy material, high hardness, high toughness, non-toxic, rust-proof, durable and non-deformable, high-precision measurement and long life span. Compared with other plastic rulers, which is more durable and has higher accuracy..
  • 【High Measurement Accuracy】Superb carftsmanship, square marking gauge, fine polishing surface, comfortable in your hand, and easy to use. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree or 90 degree angles. The measurement accuracy is 1mm. It can help you to improve working efficiency and save time with woodworking projects..
  • 【Clear Scale】The multi-functional angle ruler with clear engraving metric scales, is easy to read and elegant in ....
Check Stock

Mecurate Rafter Square, 12 inch Triangle Carpenter Square Die-cast Aluminum for Woodworking and Carpentry

  • 【High quality】: Mecurate rafter square made of die-casting aluminum, which is light and convenient. Good oxidation resistance, not easy to break, each triangle ruler is thickened, corrosion-resistant and high hardness..
  • 【Permanent scale】: With permanent laser engraved scales, Mecurate rafter square gives you the over standard accuracy you need. Frosted smooth surface, wear resistance, clear scale on the ruler surface, long service life..
  • 【Multi-function】: Suitable for the measurement, Mecurate rafter square can be used as a protractor, woodworking compass, triangle square and frame square. The horizontal base is convenient for marking, smooth and practical..
  • 【Convenient and comfortable design】: Mecurate rafter square is convenient to hang and store when not in use with humanized design. The edges and corners of each triangle are polished by special craftsmanship, so that it is smooth and does not hurt your hands..
  • 【Warranty】: Mecurate products are providing 12 months warranty and life time support, be free to have new item for replacement..
Check Stock