Top Wet Diamond Blade

3pcs 4.5 Inch Diamond Saw Blade Tile Blade, SUNJOYCO Diamond Cutting Wheel for Angle Grinder, Dry Wet Smooth Cutting for Porcelain Tile Concrete Granite Ceramic Masonry, 4/5\-7/8\ Arbor

  • SPECIFICATION: Diameter: 4-1/2inch (115mm). Arbor: 7/8 inch and reducing ring 4/5 Inch. Thickness: 1.2mm ( 1/2 inch). Increase Segement:10mm (2/5 inch). Fit for most tile saws and hand-held angle grinders with a 7/8 inch to 4/5 Inch arbor..
  • UPGRADE DESIGN: This diamond saw blade is super thin and provides a precise, smooth, chip-free cutting experience for you. The X-teeth rim of the tile cutting tools can speed up the cutting speed. Thicker center to avoid vibrations and wobbling. 8 Cooling holes ensure longer service life. It can be dry-cut or wet-cut, and the cutting effect is better with water..
  • WIDE APPLICATIONS: This super thin tile blade is designed for cutting ceramic, porcelain tile, granite, marble, and vitrified tile, brick, sandstone. It can work as a porcelain tile blade, ceramic tile cutter, granite blade, and other thin masonry blades. It's an ideal diamond saw blade for tile installers, contractors, homemade DIYers, and tradesmen..
  • HIGH QUALITY: This diamond blade for tile is well made and has brilliant safety and durability. High-quality diamond material makes sure it lasts longer and causes less heat and very little wear when cutting. it also meets the demands of dry and wet cutting..
  • SATISFACTION GUARANTEE: We provide a two-year warran....
Check Stock

GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Diamond Saw Blades Segment Height 0.394” (10 mm) - 5 inches

  • UNIVERSAL - 5" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Curb. Our 5" angle grinder concrete blade can be used both for dry and wet cutting..
  • INCREASED OPERATING TIME - Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE - Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY - Diamond blade for granite and stone is designed for precise cutting of concrete using small-sized angle grinders with 7/8” Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS - GRAFF concrete diamond blade 5 has teeth with soldered diamond segments all around. Diameter: 5 Inch (125 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) Adapter, Cutting width: 0.079 Inch (2 mm), Segment height: 0.394 Inch (10 mm), Segments number: 9. Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

4 in Super Thin Dry Wet Diamond Porcelain Saw Blades Ceramic Cutting Disc Wheels for Cutting Tile Porcelain Granite Marbles(91-5PCS)…

  • Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you..
  • Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal..
  • Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade..
Check Stock

YALUSO Concrete Grinding Wheel 3Pcs 4-1/2' Double Row Diamond Cup Grinding Wheels, 12-Segment Turbo Row Wheel, Diamond Circular Blade Set for 4-1/2' Angle Grinder/Masonry/Granite/Marble/Concrete

  • Package Include: Our set includes 3Pcs 4-1/2" (115mm) grinding discs with 7/8" (22mm) abor hole, fit for 4-1/2" Angle Grinder. Includes 1 x 12-segment diamond grinding turbo row cup wheel, 1 x double row segment diamond grinding cup wheel, 1 x diamond circular blade for dry/wet cutting. Every disc comes with 2 types of silver rings (22mm to 16mm(5/8"), 22mm to 20mm), help you cope with different occasions..
  • Premium Diamond Material: Our grinding cup wheels are constructed of high concentration of diamond segment and precision stamping steel base plate, rust and corrosion resistant. Large diamond grind segment for more aggressiveness..
  • Exhaust Hole Design: The cup grinding wheels features air holes, designed to maintain and cool the cutting pattern and reducing wear.
  • Quick Grinding & Cutting: Provides with a fast cutting effect on masonry, stone, and concrete. High diamond concentration for long durability and aggressive material removal performance..
  • Diamond Saw Blade for Masonry: Turbo rim for smooth & fast cutting of masonry, concrete, pavers, terrazzo, roof tile. Universal for dry or wet cutting. Designed as thin kerf, it can increase the cutting speed while minimizing dust..
  • Wide Application: Our diamond grinder cup wheel is used for dry/wet grinding....
Check Stock

EZARC 5 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】 EZARC 5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:5 Inch.
  • ★【Reliable Safety】This 5 Inch diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

GoYonder 7 Tile Saw Blade Wet for Angle Grinder, Super Thin Diamond Saw Blade Grinder Blades for Wet Dry Cutting, Diamond Blade for Cutting Ceramic, Porcelain, Tiles, Granite, Marbles (Blue, 7\)

  • 【Excellent Tile Blade】: The 7” tile saw blade is made of extended performance diamond matrix, which is fairly durable long lasting. Size:180 x 10 x 1.2 x 22.23mm, Thickness: 1.4mm, Outer Diameter: 180mm (7 inch), with 7/8" or 5/8" Arbor, Max speed 13200 RPM. 80m/s. Its great at cutting tile and stone without chipping the finished surface..
  • 【Precise and Clean Cuts】: Our 7” diamond saw blade has a strong core it’s slightly thicker than other blades to have a fine cut and almost no chip-out. Moreover, This little tile cutting blade has 1.4mm thickness runs smooth fast and quiet actually. they have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【Widely Application】: This diamond blade can be used to cut porcelain tile, Granite, Marble, sandstone quartz, brick, slate, cement backer board and other thin masonry blade with. Went through many materials easily like it was butter. It will be a perfect partner for tile installers and general homemade DIY..
  • 【X Teeth Rim Design】: The tile saw blade wet has X Teeth rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. Warm P....
Check Stock

3 Pcs/Lot 4\ Super Thin Porcelain Diamond Saw Blade Tile Blade for Porcelain Tile Ceramic

  • Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal..
  • Diamond blade can be used as porcelain tile blade, ceramia tile blade, granite blade and other thin masonry blade..
Check Stock

EZARC 4-1/2 inch Diamond Blade, Segmented Stone Expert Diamond Saw Blades for Angle Grinder, 4.5\ Stone Blade for Cutting Concrete Granite Masonry Brick (2-Pack)

  • ★【Stone Master】EZARC diamond blade is designed for aggressive cutting on masonry materials such as granite, concrete, nature stone and brick. Whether you are a construction worker, plumber, tile installer, roof worker, paver, DIY enthusiast or work at your home studio, this cutting blade is the perfect for you..
  • ★【Speed-optimized cutting】EZARC has increased the cutting speed of its new Stone-Master Segmented rim diamond saw blade by 30% to meet the current market requirement for speed..
  • ★【Long Service Life】Thanks to premium diamond grit with hardness HRC90+ and special dimensional arrangement, our grinder masonry blade has maximum cutting life. This angle grinder concrete blade guarantees a much longer lifetime for heavy duty cutting demands..
  • ★【Fit Tools】EZARC 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor. Disc Size:4-1/2 Inch.
  • ★【Reliable Safety】This 4 1/2 diamond blade for angle grinder is manufactured with high strength alloy steel and prime diamond matrix, which ensure spark-free cutting without burning marks on hard materials. Universal for dry or wet cutting..
Check Stock

(3 Pack, 4 1/2 inches) GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Dry and Wet Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete, Ceramic & Kerb

  • ✔︎ CONTINUOUS RIM BLADE has a high content of soldered diamond segment that makes its ideal for cutting ceramic & ceramic tile..
  • ✔︎ TURBO BLADE - diamond blade for cutting most materials including concrete, tile, stone, ceramic, paving flag, marble, granite, brick, masonry & curb..
  • ✔︎ SEGMENTED BLADE – diamond blade has teeth with diamond segments that allow cutting stone, marble, granite, brick, masonry & paving flag..
  • ✔︎ Our blades are suitable for DRY & WET CUTTING and can SELF-SHARPEN by erasing diamond grits during operation(2 or 3 cuts on silicon/abrasive stone)..
  • ✔︎ SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch with 5/8 Inch adapter, Cutting width: 2 mm/2.5 mm/2mm, Segment height: 10 mm/10mm/7mm..
Check Stock

MANTISHARP General Purpose Continuous Rim Diamond Blade,4-1/2 inch ,for Angle Grinders & Tile Saws ,Porcelain, Ceramic, Slate, and Other Masonry. 5/8”, 20mm & 7/8” Arbors, MGP-F4501. (1 PC)

  • All-Purpose Diamond Saw Blade – Offering multipurpose applications this 4 ½ inch diamond blade can be used for cutting all types of masonry materials including Porcelain, Ceramic and Slate for both indoor and outdoor construction jobs..
  • Premium Diamond Grit – MANTISHARP 4 ½ diamond blade for angler grinders and tile saws use larger diamond grits for a higher-density abrasiveness to cut through materials faster, more safely, and with increased efficiency..
  • Direct High-Heat Press Sintering – Superior to standard heat or cold press diamond cutting blades ours was built using direct high-heat which improved temperature performance for cut efficiency, extended life, and longer working periods..
  • Stronger Brass Adapter – This diamond cutting blade uses a brass adapter over nickel plate which is thicker and offers a more reliable hold thanks to a 5/8” fit and 20mm arbor. This means a tighter fit with no vibration on handheld machines..
  • Super Thin Rim – Our diamond tile saw blade with #65Mn steel core is heat-treated to withstand wet or dry cutting and boasts a 1.8mm rim for sharper, faster cutting and a thinner kerf to provide more precision cuts with consistency..
Check Stock

Virginia Abrasives 425-06315 BD Asphalt/Green Concrete High-Speed Diamond Blade (14\) Wet or Dry, (14\ x .125\ x 1\/20mm DP - 12mm Segments)

  • HIGH-SPEED DIAMOND BLADE: This diamond blade is an ideal asphalt and green concrete saw blade due to the hard bond of the diamonds, which is perfect for soft materials. This blade will work well on a variety of saws..
  • GOOD DIAMOND CONCENTRATION: Our BD diamond blades are priced for affordablity with a good diamond concentration and good durability..
  • UNDERCUT PROTECTION: Designed with alternating drop segments and U-Slot gullets, BD Asphalt & Green Concrete Diamond Blade has alternating drop segments that help clear out slurry when cutting. Use in wet or dry conditions to get clean cuts..
  • DURABLE: Virginia Abrasives Diamond Saw Blades are expertly crafted using a circular steel cutting disc with 12mm segments on the outer edge. This also helps with the performance of our product in terms of precision and life span..
  • OUR STORY: Virginia Abrasives' roots date back to the early 1970s when a hard rock garnet mining business in the Adirondack mountains of New York. Our initial focus was aimed at producing the world's best sandpaper, using hard-rock garnet abrasives. Over time and due to customer requests, the company's markets as well as product lines have expanded into a broader offering for the construction trades..
Check Stock

EZARC 4-1/2 inch Diamond Blade, Super Thin Diamond Saw Blades for Angle Grinder, 4.5\ Tile Blade for Cutting Porcelain Ceramic Granite Marble Tile (2-Pack)

  • ★【Long Lasting Diamond Blade】High performance alloy steel matrix with consistent diamond content and even distribution provide long life, enhanced material removal. Our tile blade with 10 mm segment height guarantees a long lifetime even in the most demanding materials..
  • ★【Superior Performance】Diamond saw blades with super thin X teeth turbo mesh rim not only offer the cleanest and smoothest cuts in different abrasive materials, but also reduce chipping and side friction. Our grinder diamond blade has good cutting quality without broken edges, even on super hard fine slate and marble..
  • ★【Fit Size】Our 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor (Includes a adaptor for 20mm arbor). Size:4-1/2 Inch.
  • ★【Professional Design】This diamond tile blade with integrated flange design provides the best cutting quality straight, vibration-free cutting and enhances stability and safety. Silencer Holes help to low down the noise and avoid heat damage during the cutting process..
  • ★【Wide Applications】EZARC tile cutter blade is designed for extremely smooth and clean cutting porcelain, granite, ceramic tile, sandstone quart....
Check Stock