Top What Is A 3pin Cables

XPG Prime ARGB 24 PIN PSU Extension Cable ARGBEXCABLE-MB-BKCWW

  • 【24 Pin ATX RGB Cable Extension Kit 】Adding the RGB effect on the 24pin ATX PSU extension cable. Making your case looks more stunning and....
  • 【Update Version】Increased the lamp beads to 12 pieces, thus makes the RGB brighter, even under the day or the bright light environment, the....
  • 【Softer Cable Material】Wrapped on silicone material, With a double layer structure of 1.5cm/0.59 inch thickness, more suitable for bending and....
  • 【Easy Install & Good Management】 PSU extension cables offers a better solution to modding enthusiasts for the motherboard. These pc cable....
  • 【Widely Compatiblity】Packaging including 1x 24Pin RGB ATX cable which support installed in 5V 3PIN. And it is suitable for E-ATX Motherboard, ATX....
Check Stock

URGENEX Charger Cable 2S 7.4V 1 to 2 USB Charger Replacement for SCX24 RC Car 1A with XH-3P Connector Compatible with Axial SCX10 7.4V 2S Lipo Battery RC Car Truck Drone Boat Quadcopter and Airsoft

  • High Efficiency Charging: Designed for 2S 7.4V Lithium polymer Battery and Li-ion Battery. Input: DC 5V 2A.
  • Out Put: 7.4V 1A*2(Independent channels). Connector: USB to XH-3PIN Plug.
  • Wide Applications: URGENEX lipo battery USB charger cables are compatible with Axial SCX24 SCX10 RC car, truck, FPV Drone Quadcopter and boat. Please note that we don't recommend to use them to a battery below 500mAh..
  • Ultra Safe: Our high technology enables intelligent IC protection. Built-in overload, over-voltage, overcharge IC protection circuit. Please make sure that the voltage(7.4V) match before use..
  • How To Use: 1. Charger Powered on and no load, then the red light is on.
  • 2. Battery charging in progress, then the red light is solid, the green light is flashing.
  • 3. Battery is fully charged, the green light is solid. Please unplug the batteries after fully charged..
  • What You Get&Warranty: 1PCS 1 to 2 7.4V USB Lipo battery charger. URGENEX always insists customer first and offers one year warranty..
Check Stock

30cm 2 Pack All Black Sleeved PWM Fan Splitter Cable 1 to 2 Converter,2 Way 4 Pin PWM Fan Splitter Cable - 11.8 Inches

  • Length 300mm/11.8", pack of two computer fan splitter cables.
  • Compatible with 4pin PMW fan connector and 3pin fan connector.
  • Supports 2 PWM fans from a single motherboard PWM header.
Check Stock

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

  • 3-Pin JR plug male to male connector servo extension lead wire cable..
  • There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
  • Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
  • Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock

LICHIFIT 5V 3PIN RGB VDG Conversion Line Cable Connector for GIGABYTE Motherboard

  • It can convert your GIGABYTE motherboard 5V 3Pin VDG to normal 3Pin..
  • Wiring: the arrow LOGO corresponding to RGB Pin 5V..
Check Stock

WMYCONGCONG 10 PCS 10' 4 Pin Fan Extension Power Cable Computer PC Fan Power Extension Cable for PWM Fan Computer ATX Case

  • 4-Pin male to female fan extension cable, compatible with 4pin PMW fan connector and 3pin fan connector..
  • High quality 4 pin fan splitter cable, offers greater flexibility for positioning motherboard and CPU Fans for optimal cooling, for extending fan cables in your case..
  • The fan extension cable is one 4-pin female connector to 4-pin male connector, suits for CPU or PC case fan..
  • Pacakge Content: 10 * for 4 Pin Fan Extension Cable..
Check Stock

AeroCool Fan Cooling for PC, DS 120mm (Black)

  • Noise and shock reduction fan frame Incorporating four Silencer blocks and anti-vibration rubber pads on each mounting holes.
  • Fluid Dynamic Bearing (FDB) delivers longer life span and higher precision rotation and anti-shock function.
  • Low speed 7V Voltage Reduction cable included for ultra-low speed with unrecognizable noise.
  • Beautifully finished Dual color and dual Material fan with four color combinations and LEDs.
  • The world’s first dual-layered fan blades combination of plastic and rubber fan blades to absorb Wind noise.
  • Four anti-vibration screws are included for easier installation.
  • Power cables are Black sleeved with both 3pin and Molex 4pin connectors.
Check Stock

AeroCool Fan Cooling for PC, DS 140mm (Blue)

  • Noise and shock reduction fan frame Incorporating four Silencer blocks and anti-vibration rubber pads on each mounting holes.
  • Fluid Dynamic Bearing (FDB) delivers longer life span and higher precision rotation and anti-shock function.
  • Low speed 7V Voltage Reduction cable included for ultra-low speed with unrecognizable noise.
  • Beautifully finished Dual color and dual Material fan with four color combinations and LEDs.
  • The world’s first dual-layered fan blades combination of plastic and rubber fan blades to absorb Wind noise.
  • Four anti-vibration screws are included for easier installation.
  • Power cables are black sleeved with both 3pin and Molex 4pin connectors.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

Hikig Zero Delay LED PC Encoder USB to Joystick for LED Arcade Buttons & Joysticks - DIY Your Own Arcade Game Console - MAME, Raspberry Pi Compatable

  • 2-Player LED USB Encoder Set: This is a 2-Player LED Arcade USB Encoder Set. Power Your Standard LED Arcade Buttons Directly..
  • Compatable for Almost All Type Joysticks: The Wire harness compatable for no matter Standard American Style Joystick or Japan 5Pin Style Joysticks..
  • Voltage: 5V (The Encoder Board Output 5V Power for both joysticks and LED Arcade Buttons..
  • 100% Zero Delay: Both Encoder Boards are 100% Zero Delay to Offering Better Game Experience..
  • Support Standard LED Arcade Buttons. The Set including 20 Pcs 3Pin Cables for the LED Buttons. Easy to install..
Check Stock

Avisiri 2 Player Arcade Joystick DIY Parts 2x USB Encoder + 2x Elliptical Joystick Hanlde + 18x American Style Arcade Buttons for PC MAME Raspberry Pi Windows Red & Blue

  • 2-Player LED USB Encoder Set: This is a 2-Player LED Arcade USB Encoder Set. Power Your Standard LED Arcade Buttons Directly..
  • Compatable for Almost All Type Joysticks: The Wire harness compatable for no matter Standard American Style Joystick or Japan 5Pin Style Joysticks..
  • Voltage: 5V (The Encoder Board Output 5V Power for both joysticks and LED Arcade Buttons..
  • 100% Zero Delay: Both Encoder Boards are 100% Zero Delay to Offering Better Game Experience..
  • Support Standard LED Arcade Buttons. The Set including 20 Pcs 3Pin Cables for the LED Buttons. Easy to install..
Check Stock

VIGRUE 96pcs 8 Sets 2 3 4 6 8 12 Pin Electrical Wire Connector Plug, 16-20AWG Waterproof Sealed Auto Gray Male and Female Terminal Connectors for Motorcycle,Truck, Car, Boats,Scooter

  • ... Suitable for various wire connectors of car,motorcycle, scooter, truck, quad bike, caravan, boats..
  • EASY TO INSTALL: You could use crimping tool to crimp the terminals and VIGRUE buckle design is easy to install plug connectors..
  • WHAT YOU WILL GET:12Pin Male*1pcs,12Pin Female*1pcs,8Pin Male*1pcs,8Pin Female*1pcs,6Pin Male*1pcs,6Pin Female*1pcs,4Pin Male*1pcs,4Pin,Female*1pcs,3Pin Male*2pcs,3Pin Female*2pcs,2Pin,Male*2pcs,2Pin Female*2pcs,Male Terminal*40pcs,Female Terminal*40pcs.Note:This plug can only be used once, we recommend not to disassemble it after using the plug..
Check Stock