Top Wheel Bearing Puller Tool

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

Lidscura 8PCS Motorcycle Bearing Pullers 9-23mm Motorcycle Internal Bearing Removal Tool Kit Inner Bearing Extractor Kit

  • Widely Application: This Remover tool kit is ideal for internal bearing removal of automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc..
  • Meet Your Different Needs: Internal bearing Extractor tool set is equipped with 5 different sizes of open clips. The bearing can be disassembled from 0.35inch(9mm) to 0.91 inch(23mm) inside diameter..
  • Fine Workmanship: This motorcycle bearing pullers set is made of high-quality chrome vanadium steel, strong and durable for for a long service time..
  • Easy to Use: Connect this bearing puller kit with 1/2" 3/4" male thread water faucet, open clamps by turning handle clockwise to snug against the bearing for taking out the inner bearing..
  • Instructions for use: First the tool head into the inner ring of the bearing, and then screwed into the shaft, the tool head propped open hooked bearing inner ring, and then turn the shaft, you can pull out the bearing.
Check Stock

KELEN Blind Bearing Puller Tool, Blind Inner Internal Bearing Puller,Blind Hole Bearing Puller Set, Slide Hammer Removal Tool Set 5Pcs

  • The blind bearing puller is designed for removing out blind holes bushes and bearings from blind housings without any damage of your vehicles.You can do dent repair, lock pull or bearing pull on a scooter or any small machine..
  • Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts..
  • Bearing Extractor Collets With Internal Capacity From 3/8 inches (10mm) To 1-1/4 inches (32mm),15 inches (382mm) Overall Length..
  • Blind bearing puller, blind hole bearing puller,blind inner internal bearing puller,inner bearing puller set,blind inner bearing puller set,blind bearing puller kit,blind bearing puller set,blind bearing puller tool,blind hole bearing puller set,blind hole bearing puller kit..
  • Includes puller/slide hammer, 4 adapters 12 - 32 mm and carry case.Ideal Replacement for pulling jobs.Satisfaction d. If not completely satisfied, return it to us for a no-hassle refund or credit..
  • Part number: Blind Bearing Puller Tool 5PCS.
Check Stock

Orion Motor Tech Wheel Bearing Press Kit for Front Wheel Drive Bearing Removal & Installation 24pc Wheel Bearing Puller Tool Set with Sliding Screws Universal Bushings Sleeves Storage Case

  • WHEEL BEARING PULLER SET: This wheel bearing tool kit by Orion Motor Tech provides everything you need to let you quickly and easily remove and install your wheel bearings without hammering and front-end alignment.
  • UNIVERSAL COMPATIBILITY: Our versatile wheel bearing press kit offers multiple sleeves and bushings in most common sizes to work with nearly any front wheel drive automobile or light truck, whether foreign or domestic.
  • QUICK & EASY OPERATION: Two 8.8 grade sliding screws with precision threading firmly hold your bearings and let you smoothly pop them out without damage, leaving the steering knuckle and strut assembly untouched.
  • DURABLE CONSTRUCTION: Made of premium stainless steel, this wheel bearing removal tool set provides strong and dependable long-lasting service.
  • the sliding screws are heat treated and blackened for superior strength and corrosion resistance.
  • COMPACT & PORTABLE: This 24 piece front wheel bearing press tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop.
Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

Bzsunway Front & Rear Bearing Puller Kit Wheel Hub Puller & Bearing Remover & Installer Kit Wheel Hub Remover & Installer Replace OEM # 27213  21pcs

  • 【High Performance & Time Saving】  No need for other tools, no further calibration after disassembly and installation, the disassembly and....
  • 【Wide Compatibility of Adapters】 Our wheel bearing puller/installer tools are specially equipped with suitable adapters for various models (like....
  • 【Superior Quality】 Our wheel bearing removal tool set is made of high quality heavy duty stainless steel , durable and sturdy, and can hold up to....
  • 【Must Have Tool Kit】 Use our wheel bearing stamping tools without need for a shop press. Whether it is a professional or DIY mechanic, our wheel....
  • 【Satisfactory Service】 If you are not satisfied with our products.You can request a full refund within 30 days to support a 12 month....
Check Stock

DASBET 3 Jaw Pilot Bearing Puller, Heavy Duty Pullers Set Bushing Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV

  • 3 Jaw Gear Puller: Used to removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside..
  • Premium Quality: 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller..
  • Bearing Range: Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force..
  • Wide Application: Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Package Included: 1 x 3 Jaw Pilot Bearing Puller.
Check Stock

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

  • [Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece....
  • [Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts.
  • [Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength.
  • Machine precision flywheel puller tool....
  • [Fit for Your Tool Kit]: Wheel puller set includes (1) floating swivel, (2) 5/16 by 4 inch (7.9mm x 101mm) bolts, (2) 1/4 by 3 inch (6.3mm x 76mm)....
  • [Blow-Molded Case]: Steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure....
Check Stock

NMAZA 3 Jaw 10 Inch Hydraulic Gear Puller 10Ton Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine M/Case

  • 【POWERFUL TOOL】 : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2"(50mm) Ares Travel with spread10" ( 250mm) which can meet your working requirements.
  • 【3 IN 1 DESIGN】:This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360°for flexibility.
  • 【COMPACT & LIGHTWEIGHT】: The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage.
  • 【EASY TO USE】-Easy to carry and operate, portable structure is easy for carrying and operation.
  • 【WIDE APPLICATION】: This great Wheel Bearing Hub Removal Tool has wide appication, which is suitable for pulling hubs flanges, gears and bearings.
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while resisting rust and corrosion.
  • Inner CV axle removal tool has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
Check Stock

OTC 6542 Bearing Cup Remover

  • OTC's 6542 Bearing Cup Remover tool is ideal for servicing hubs on today's popular front-wheel-drive small cars.
  • Tapered metal cone holds the jaws securely in place during pulling.
  • Perfect for pulling internal bearing cups, seals, bushings, etc..
  • Jaw spread is 15/16 inch to 3-1/4 inches and reach is 3-1/2 inches.
  • use with any 5/8-18 threaded slide hammer such as OTC's No. 1155 or 1156 as well as OTC's No. 927 Push-Puller.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock