Top Wheel Hub Bolt

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 2pcs

  • StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5×100 bolt pattern AND wheels must be 5×114.3 or 5×4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
  • 2) Wheel studs are M12x1.25 12×1.25mm threads.
  • 3) You have 1.0″ (25mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.0″ (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 5) Wheel center bore needs to be no smaller than 56.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Adapter Spacers | Thickness: 1.0″ (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5×114.3 (5×4.5″) | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12×1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent....
Check Stock

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 4pcs

  • StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5x100 bolt pattern AND wheels must be 5x114.3 or 5x4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
  • 2) Wheel studs are M12x1.25 12x1.25mm threads.
  • 3) You have 1.0" (25mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.0" (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 5) Wheel center bore needs to be no smaller than 56.1mm..
  • [SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness: 1.0" (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corro....
Check Stock

4 Chevy & GMC 6x5.5 Black HUB Centric 2

  • 4 Pc Brand New Chevy Gmc Cadillac 6 Lug 2" Thick Black Hub Centric Wheel Spacers Adapters.
  • Wheel Adapter Specifications: Color: Black | Thickness: 2" (51MM) | Bolt Pattern: 6x5.5" (6x139.7mm) | Wheel Bolt Pattern: 6x5.5" (6x139.7mm) | Center Bore: 78mm | Thread Pitch: 14x1.5 | Material: Aerospace 6061 T6 Forged Aluminum.
  • Hub Centric = The correct way to space out your wheels. Our spacers fit perfectly over your vehicles hub, which eliminates any possibility of vibrations at high speeds. Perfect for fixing clearance issues, for example.
  • your wheels hitting shocks/struts or brake calipers.
  • Gives your vehicle an aggressive stance & allows for better handling characteristics. We have tested these adapters in aggressive off-road and have withstand every single time..
  • Made In The USA Other sizes available 1", 1.25", 2", 2.5", 3", 3.5", 4" Thick..
Check Stock

2pcs 5mm Hubcentric 4x114.3 Wheel Spacers (66.1mm bore) Compatible with Nissan 200sx 240sx 240z 260z 280z 280zx 300zx Altima Maxima Sentra Cube (4x4.5)

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 4/114.3 (4/4.5") bolt pattern and 66.1mm Centerbore. Compatible with Nissan 84-88 200SX, 88-94 240SX, 95-98 240SX Base Model, 240Z (Rear Hub), 260Z (Rear Hub), 280Z (Rear Hub), 280ZX (Rear Hub), 84-86 300ZX. Compatible with Nissan 93-01 Altima, 09-11 Cube, 85-88 Maxima, 00-10 Sentra. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 4x114.3 (4x4.5") | Hub Center Bore: 66.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing....
Check Stock

4 Pc 5x135 MM to 6x135 MM 5 Lug to 6 Lug 2 Piece Construction Hub Centric Conversion Wheel Spacers Adapters 2' Thick 14x2.0 Studs Works with 1997-2002 Ford F150 Adapting 03+ Ford F-150 Wheels

  • 4 Pc of 5 Lug To 6 Lug 2″ Thick Hub Centric CONVERSION Wheel Adapters. Allows you to put 6×135 MM Wheels on a 5×135 MM Vehicle..
  • Adapter Specs: Color: Raw Aluminum | Thickness: 2″ (51 MM) | Bolt Pattern: 5×135 MM | Wheel Bolt Pattern: 5×135 MM| Wheel Bore: 87 MM | Hub Bore: 87 MM | Thread Pitch: 14×2.0.
  • Each Adapter is 2 Pieces | Adapter Thickness Back Piece: 1.25″ | Adapter Thickness Front Piece: 0.75″ | Material: Aerospace 6061 T6 Forged Aluminum.
  • Bolt-On Kit With All Hardware Included. Free Thread Locker.
  • Fits Ford Vehicles With A 5×135 MM Bolt Pattern – Full Hub Centric.
Check Stock

VLAOSCHI Black Forged 5x115 Hubcentric Wheel Spacers 1.25 Inch with 14x1.5 Studs 71.5mm Hub Bore Compatible with Dodge 5 Lug for 2009-2022 Challenger | 2006-2022 Charger | 2005-2008 Magnum - Pack of 4

  • 【Benefits】Wheel spacers are designed to move the wheel further out from the hub, give your vehicle a more aggressive stance, allow for better handling characteristics & increases driving stability.
  • Mount larger wheel or tires, eliminate wheel/tire rubbing instantly..
  • 【Features】VLAOSCHI wheel spacers are made from FORGED 6061 T6 aerospace aluminum, CNC precisely machined, undergoes anodizing process to prevent surface corrosion and rust, with pre-installed heat treated 10.9 grade carbon steel studs..
  • 【Applications】Move the rims further out from the hub 1.25 inch each side, compatible with Dodge 5 Lug vehicles: 2009-2022 Challenger, 2006-2022 Charger, 2005-2008 Magnum, 2005-2022 Chrysler-300.
  • 【Specifications】Pack of 4 Black Forged Hub-centric Wheel Spacers. Thickness: 1.25" / 32mm | Vehicle Bolt Pattern: 5x115 mm | Wheel Bolt Pattern: 5x115 mm | Thread Pitch: 14x1.5 studs & nuts | Center Bore: 71.5mm..
  • 【Installation & Warranty】Easy bolt-on installation, no special tool needed. All VLAOSCHI products are covered by two years warranty to be free of defects in material and workmanship. Please note: recheck all bolts after 20-50 miles of driving, then again after 1-2000 miles..
Check Stock

OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit Back and Front Wheel Bearing Puller Kit Back and Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: The OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit saves time removing even seized-up wheel hub and....
  • FOR PROFESSIONAL AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing....
  • UNIVERSAL APPLICATION: This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles, remove....
  • SLIDE-HAMMER-FREE REMOVAL: This wheel bearing tool and hub press makes it simple to remove and install wheel hub and bearing assemblies as well as....
  • WHEEL HUB PULLER KIT INCLUDES: Hub removal tool, Front wheel bearing adapters, Pusher Washers, Receiver Sleeves, Nut-Bolt, and Heavy Duty Bearing.
Check Stock

Wheel Accessories Parts Set of 2 Wheel Adapters 5x4.50 (5x114.3) to 5x4.50 Hub Centric 70.50mm Hub Bore M14x1.50 Thread, Hub Centric to Vehicle and Wheel, Billet Aluminum Wheel Adapters 1\ Thick

  • T6061 Billet Aluminum Wheel Adapter / Spacer. Anodized Finish. OE Replacement Thread Pitch M14x1.50. Lug Nuts Included - 70.5 ID/OD Hub Centric Fit.
  • Fitment: Fit Ford 5x4.5 Bolt Pattern / Bolt Circle vehicles with 70.5 ID/OD Hub Centric to vehicle hub and wheel centerbore.
  • Specs: T6061 Billet Aluminum Adapter / Spacer - 1.00" Thickness. M14x1.50 Lug Nuts included with matching stud threads on adapter M14x1.50. Hub Centric Fitment insures perfect balance..
  • Finish: Premium anodized adapter / spacer finish with matching black studs and dual coated black finish lugs..
  • Construction: Built from the highest grade aircraft quality T6061 Billet Aluminum. Coyote Premium Wheel Accessories. Overall diameter of adapter 150mm with Hub Centric ID 70.5 and Wheel Centerbore OD 70.5.
Check Stock

ECCPP New Front Wheel Hub Bearing Assembly 515003 fit for Ford Explorer (Sport Trac) Ranger, Mercury Mountaineer, Mazda B3000 B4000 4WD w/ABS 5 Lug 3 Flange Bolt 2pcs

  • COMPATIBLE VEHICLES - wheel hub bearing assembly for 1995-2001 Ford Explorer front wheel hub,2001-2005 Ford Explorer Sport Trac hub bearing,2000-2009 Ford Ranger front wheel bearing, 2001-2002 Mazda B3000 front bearing,2000-2009 Mazda B4000 bearing assembly,1997-2001 Mercury Mountaineer hub assembly.
  • FEATURES - ECCPP'S wheel hub bearing assembly fits for the front location, 5 Lugs with ABS, 3 Flange Bolt, replace OE 515003.
  • MAIN FUNCTION - Hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protectiv....
Check Stock

KIE Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that resists rust and corrosion..
Check Stock

NRG SRK-200-1BK Black Body/Titanium Ring GEN 2.0 Racing Performance Steering Wheel Quick Release Adapter Fit 6 Bolt 70mm SFI Spec

  • Quick Release Spec: Gen 2.0 , Height : 2.50" / Width : 3.50".
  • Tight Ball Bearing Lock Design Eliminates Free-Play.
  • Fits Any 6 Bolt 70mm or 74mm Spacing Steering Wheel.
  • Fits on Steering Wheel Hub Adapters with 6-Bolt 70mm Bolt Spacing.
  • Installation: Please make sure to purchase an aftermarket 6 hole hub adapter and steering wheel that matches your vehicles.
Check Stock

Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion..
Check Stock