Top Wheel Lock Nut

9\\\ Angle Grinder

  • Rotatable rear handle rotates with just the push of a button, with positive stops every 90 degrees, to suit most cutting and grinding operations.
  • Wire mesh intake covers are engineered to prevent metal shards from entering motor especially when used in close proximity to other grinders.
  • ""Tool-less"" wheel cover allows for easy guard adjustment with no need for tools to multiple grinding and cutting angles.
  • Labyrinth construction minimizes dust and debris penetration into the motor and bearings for longer tool life.
  • AC/DC switch for use with alternative power source.
  • Lower vibration rear and side handles includes soft grip for more comfort and control.
  • Externally accessible brushes for easy serviceability.
  • Large rubber tool rest to help protect tool and surfaces from damage.
  • Rugged all metal gear housing for added protection.
  • Protective zig-zag varnish seals the armature from dust and debris for longer tool life.
  • Ideal for welders, stone finishers, masons, fabricators and more.
Check Stock

Drywall & Sheetrock Dolly Polyurethane Wheels with Axles Set of 4 - USA Made

  • Replacement wheel for most styles of drywall and sheetrock dollies.
  • The wheels measures 8" in diameter and has a 2" tread width.
  • Non-Marking floor safe wheel that rolls smoothly and quietly - 1,200 Lbs Capacity each / 4,800 Lbs for all four.
  • Comes with 1/2" zerk axle that is 3-3/8" long and includes matching lock nut.
  • 2-1/2" Hub Length (how wide the wheel is at its widest point).
Check Stock

Bike Bear Bike Stockholm 2021 Size 580 mm White

  • 【Front and Rear Wheels White】 Material: magnesium alloy (93% magnesium), weight: F: 1.50kg/3.30lbs, R: 1.70kg/3.74Ibs, design: 6-spoke, valve type: Schrader, tire type: clincher..
  • 【Gear Speed】 is the speed (gear position) 7/8/9/10 gear, 8/9/10 gear wheel set, lock nut size: front: 100, rear: 135. Wheel size: 26.
Check Stock

TEMO 20 pc Wheel Lock Lugnut Anti-Theft Screw Lug Nut Removal Key Socket Set for Vw Audi Vag Volkswagen

  • Wheel Nut Removal Socket Set Including 20 PC 17mm socket: #521, #522, #523, #524, #525, #526, #527, #528, #529, #530, #531, #532, #533, #534, #535, #536, #537, #538, #539, #540..
  • They are used to remove or lock wheel anti-theft screws for VAG vehicles including UP, Polo 2010>, Beetle 2012>, Golf 2009>, Jetta 2011>/, EOS, Scirocco, Passat 2006>, Sharan, Touran, Tiguan..
  • Includes a durable plastic tool case with a latch. The case is 9" X 6" X 2-1/2". When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time. This helps reduce pressure on the remaining nuts..
  • Equivalent to OEM T10313. Not intended for use with impact wrench. Interior black surface of each key is made with Manganese Phosphate Coating..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Lug Nut Remover 6 Pieces Twist Socket Set Extractor Tool Metric Bolt and Lug Nut Extractor Socket Tools

  • ... fasteners. The unsmooth concave wall inside is more conducive to the grabbing of the stubborn nut and easy to remove..
  • 【Excellent Torque &Tight Grip】This stripped lug nut removal tool is in plum-shaped internal thread design provides excellent torque.
  • The unsmooth concave wall inside is more conducive to firmly wheel lock and quickly remove the worn lock bolt and rusted, damaged lug nut with less effort.
  • 【Center Punch Bar】A hex top on the extractor makes it easy to use a wrench instead of a ratchet. The extractor may bite together with the broken bolt. After removing it, please use the center punch to knock the bolt off the extractor..
  • 【Multi-Application】17mm, 19mm, 21mm,22mm 27mm and 5 different size nut extractors and an extra metal rod can meet the various needs of the usual needs, they easily pop a removed nut from your extraction sockets, whether it is car repair, remove damage nuts, can provide you with Great convenience..
  • 【BUILT TO LAST】The hardened alloy steel provides this twist socket lug nut remover set with maximum strength and durability.
  • Black oxide finish resists rust and corrosion.
  • 【USE WITH YOUR TOOLS】1/2-inch square drive fits your wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (not included).
Check Stock

ABN Removable Trailer Wheel Chock – Universal Stopper Cradle Holder for Standard Motorcycle Bike Front Wheels

  • LOAD AND TRANSPORT YOUR BIKE: The ABN | Motorcycle Wheel Chocks Front Motorcycle Stand Wheel Chock 1-Pack is standard-sized to hold the front wheel of any street bike.
  • Motorcycle wheel chocks for trailer floor fits standard front wheels (motorcycles with super-wide front tires or custom low-profile front fenders may not fit this wheel chock).
  • EASY TO USE: Designed with one-person loading in mind.
  • Simply drive or push your bike into the motorcycle front stand to secure your bike in the upright position (use with straps to tie down and support – not included).
  • Takes only minutes to install and seconds to load and unload.
  • MOUNT ON FLAT SURFACE: Mount on wood or metal floor – Mounting plate is held off the floor by the included spacers while the bolt that holds the top to the frame goes in from top with nut and lock washer on the bottom under the mounting plate.
  • Removable by unbolting from your application surface (not quick attachment) – Mounting points allow the motorcycle wheel stand to be removed.
  • 24.5” x 10” x 13” inch (62.2cm x 25.4cm x 33cm) overall and 10-inch (25.4cm) motorcycle front wheel chock length.
  • BUILT TO LAST: Heavy-duty 7-gauge formed steel base plate construction, carbon steel hardware....
Check Stock

McGard 24215 Chrome Cone Seat Wheel Locks (M14 X 1.5 Thread Size) - Set of 4

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
  • Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. Computer generated key designs allow for an inf....
Check Stock

Dometic Baystar Hydraulic Steering Kit, HK4200A-3

  • Gives 5 wheel turns lock-to-lock when using BayStar outboard cylinders.
  • Kit Includes: (1) BayStar helm pump (HH4314-3) (1) BayStar cylinder (HC4645H) (2) Hydraulic steering fluid (HA5430) (1) Filler kit (HA5438).
  • Also includes (1) BayStar tubing kit (HT4420H, 2 x 20' hoses).
  • Dn not use BayStar on smaller HP outboard engines that use wing nut type transom mount clamping screws.
Check Stock

McGard 84844 Black 9/16 - 18 Thread Size Cone Seat Style Wheel Installation Kit for 8-Lug Vehicle

  • Includes 28 Lug Nuts-4 Wheel Locks-1 Key & 1 Key Pouch.
  • Duplex wheel locks and lugs set contains larger key hex, 2.5″ overall length and wider outside diameter of our Duplex Wheel Locks are necessary in some truck & van applications. As a general rule, most 8 lug wheels require Duplex Wheel Locks. Kit includes: Lug Nuts, Wheel Locks, 1 Unique Key and 1 Key Pouch.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that Wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks and lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
Check Stock

Land Rover Range Rover Classic 1987-1995 / Discovery 1 1994-1999 Wheel NUT with Washer Set of 5 Part: RRD500560 / ANR2763MMM

  • LAND ROVER RANGE ROVER CLASSIC 1987-1995 / DISCOVERY 1 1994-1999 WHEEL NUT WITH WASHER SET OF 5.
  • NEW OE UK BRAND PART # RRD500560 / ANR2763MMM.
  • Alloy wheel nut set of 5 with part number RRD500560 fits all alloy wheels on the Land Rover Discovery 1 Conical blind wheel nut - thread 16 x 1,50 - length wheel nut (mm): 52 - length thread (mm): 48 - to fit alloy wheel only - style: chrome - 27 mm socket - Ø shank: 29mm.
  • Land Rover # RRD500560 - Wheel Nut With Washer.
  • Fits: Discovery I | '94 - '99 Range Rover Classic | '87 - '95 Defender 90 | '94 - '97 Defender 110 | '93.
Check Stock

McGard 24548 Black Cone Seat Wheel Locks(1/2\-20 Thread Size) - Set of 5

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by ....
Check Stock

DPAccessories LCS3B6HCGBK06LK4 4 Black Spline Drive/Tuner Locking Lug Nuts/Wheel Locks - M12x1.50 - Dual Hex Wheel Lock Set

  • For aftermarket wheels that require a small diameter lug nut for slim lug holes – Will not fit factory OEM wheels.
  • M12x1.50 – Dual Hex (3/4 in. and 13/16 in. ) – Conical 60 Degree Seat Nut – 0.8 in. wide – 1.34 in. tall.
  • Unique external security pattern requiring a matching key for removal.
  • Made from proprietary black coating and hardened steel for protection against rust and corrosion.
  • Kit includes: four (4) black wheel locks one (1) wheel lock key and a key code label for replacement keys.
Check Stock