Top Wheel Puller

Shankly Steering Wheel Puller Kit (8 Piece), Professional-Grade, 1.5” to 3.35” Inch Spread, Ideal Combination for Harmonic Balancer Puller and Flywheel Puller

  • ✅ COMPLETE WHEEL PULLER SET: The steering wheel puller set from Shankly includes two thrust caps and a two-leg puller with two sets of legs. It has a maximum spread of 38/85MM, or 1.5"/3.35.
Check Stock

KIE Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that resists rust and corrosion..
Check Stock

Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion..
Check Stock

OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit Back and Front Wheel Bearing Puller Kit Back and Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: The OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit saves time removing even seized-up wheel hub and....
  • FOR PROFESSIONAL AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing....
  • UNIVERSAL APPLICATION: This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles, remove....
  • SLIDE-HAMMER-FREE REMOVAL: This wheel bearing tool and hub press makes it simple to remove and install wheel hub and bearing assemblies as well as....
  • WHEEL HUB PULLER KIT INCLUDES: Hub removal tool, Front wheel bearing adapters, Pusher Washers, Receiver Sleeves, Nut-Bolt, and Heavy Duty Bearing.
Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
  • Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
  • The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

  • 【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
  • 【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
  • 【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
  • 【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

Wheel Bearing Puller Tool Kit Compatible with Harley Davidson Motorcycles | Wheel Bearing Remover Installer Tool Set for 0.75 1 25mm Bearings Compatible with Hogs from 2000 11 Pcs

  • Compatible with Recent Harleys: This OMT wheel bearing puller tool kit is compatible with most Harley-Davidson motorcycles from 2000 to 2020,....
  • Inclusive Set: Aside from your wrench, this wheel bearing kit provides everything you need—pullers, bolts, plates, & dowels—to service your....
  • Quick & Easy Operation: This tool set installs and removes your hog's 0.75-inch, 1-inch, or 25-millimeter sealed wheel bearings without damage,....
  • Built to Last: Made of premium 45# stainless steel, this bearing installer and puller set provides strong and dependable long-term service.
  • Convenient Case: This bearing puller set comes with a blow-molded case, organizing the parts and keeping them easy to carry, store, and maintain.
Check Stock

ABN Wheel Bearing Puller Kit Hub Removal Tool Wheel Bearing Tool - Independent Suspension Roll Ball Bearing FWD RWD AWD

  • [No More Hammer or Shop Press]: The ABN Master Wheel Bearing Removal Tool and Wheel Hub Puller Tool Kit allows you to remove and install wheel hub and....
  • [Fits Your Vehicle]: Universal for front, rear, and all-wheel drive vehicles with independent suspension and pressed roller-ball bearings.
  • [Use on Seized-Up Assemblies]: Self-centering mechanism and thrust bearing design.
  • Use the round plate that corresponds to the diameter of your....
  • [Perfect Sizes]: Universal set includes 21 pieces that have A through U permanently printed labels.
  • Pusher washer disk driver sizes from 2.1 inches....
  • [Contents]: Wheel hub and bearing puller set and installation kit includes a remover tool, adapter shoes, pusher washers, receiver sleeves, nut-bolt,....
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

ATPEAM Car Steering Wheel Puller | Automotive Steering Wheel Compressor Remover Set | Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • Built to Last: Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • Function: Remove steering wheels of most vehicles with or without telescoping tilt steering columns.
  • Use to apply equal pressure so you can safely remove steering wheels, Perfect for the home or professional mechanic.
  • Tips: We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • Various Steer Wheel Cap Screws: Includes 4 sets of cap screws to be used for various thread requirements. Size of Cap Screws: M8-1.25 X 90 Mm, 3/8"-16 X 3-1/2", 5/16"-24 X 3-1/2", 5/16"-18 X 4".
  • Package Includeds: This steering wheel removal kit includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements and a carrying case for your convenience.
Check Stock