Top Wide Gain Bandwidth

Major Brands LF353N General Purpose Dual Op Amplifier, -18 V, 8-Pin, Mdip Rail, 3mm H x 6.35 mm W x 9.27 mm L (Pack of 15), 6.35 millimeters Width, 9.27 millimeters Length, Volts (Pack of 15)

• Wide bandwidth (unity gain): 1.1 MHz (temperature compensated).
• Low input offset voltage: 2 mv and low input offset current: 2 na.

Bridgold 20pcs TIP41C TIP41 NPN Silicon Power Transistor 6 A, 100 V, 3-Pin

• High Current Gain Bandwidth Product fT = 3 MHz (min) @ IC = 500 mAdc.
• Collector-Emitter Saturation Voltage - VCE(sat) = 1.5 V (Max) @ IC = 6.0 Adc.
• Collector-Emitter Sustaining Voltage -VCEO(sus) =100 Vdc (min) - TIP41C, TIP42C.
• Complementary Silicon Transistors Intended for a Wide Variety of Switching and Amplifier Applications.
• Driver and Output Stages of Hi-Fi Amplifiers.

Mini Stereo Line Level Booster Amplifier Audio Preamp 20dB Gain Volume Control

• ...de ±12.5V high output amplitude and max 20dB high gain..
• Unique design and HiFi clear sound: double-side PCB design, NE5532P op amp with pluggable socket design, convenient to change other op amps to enjoy different sound and bring much DIY fun for audiophiles. High-qaulity sealed potentiometer, with wide frequency bandwidth and excellent dynamic response, the sound is smooth and natural, warm and delicate with ultra-low distortion..
• Mini size with exquisite appearance, compact and all-metal design for durability and shielding the electronics from electromagnetic interference with noise rejection. Perfect design in size and function, suitable for many scenarios to increase the output level, such as home stereo system, mixer or speaker setup, karaoke, audio recording, party, live stage event etc..

LM YN AD8302 Wideband Logarithmic Amplifier Wideband Linear Multiplier Phase Detector Module Low Frequency to 2.7G for OPA695

• ...asuring gain/loss and phase in numerous receive, transmit, and instrumentation applications. It requires few external components and a single supply of 2.7 V–5.5 V. The ac-coupled input signals can range from –60 dBm to 0 dBm in a 50 ohm system, from low frequencies up to 2.7 GHz. Both subsystems have an output bandwidth of 30 MHz, which may optionally be reduced by the addition of external filter capacitors. 003cbr003e.
• The AD8302 can be used in controller mode to force the gain and phase of a signal chain toward predetermined setpoints.003cbr003e.
• The AD8302 includes a phase detector of the multiplier type, but with precise phase balance driven by the fully limited signals appearing at the outputs of the two logarithmic amplifiers. Thus, the phase accuracy measurement is independent of signal level over a wide range. The signal inputs are single-ended, allowing them to be matched and connected directly to a directional coupler. Their input impedance is nominally 3 kΩ at low frequencies. 003cbr003e.
• The phase and gain output voltages are simultaneously available at loadable ground referenced outputs over the standard output range of 0 V to 1.8 V. The output drivers can source or sink up to 8 mA. A loadable, stable reference voltage of 1.8 V is ava....

Browning 450MHz-470MHz UHF 3dBd Land Mobile NMO Antenna

1 pc OPA1611 Module Low Power Precision op amp Audio Dedicated Audio Amplifier

• Name: Low Power Precision Operational Amplifier Audio Dedicated Preamp Size: 50mm X 50mm Supply voltage range: up to ±18V.
• Can be arbitrarily changed to positive amplification, reverse amplification, shooting with the integration circuit and other forms. The OPA1611 is ultra-low noise and is a powerful audio system..
• The main features Excellent sound quality Ultra-low noise: 1.1nv/vHz at 1kHz Ultra low distortion: 0.000015% 1kHz High conversion rate: 27V/H Bandwidth: 40MHz (G=+1) Open loop gain: 130dB Unity gain stability Low quiescent current: 3.6 per channel Rail-to-rail output Wide Supply Range: ±2.25V to ±18V.
• Application Professional audio equipment Analog and digital mixing console Audio Test and Measurement Preamplifiers microphone Broadcast recording equipment High-end A/V receiver.
• The opa1611 bipolar input op amps achieve a low 1.1nv/VHz noise density at ultra-low distortion Hz of 0.000015% at 1kHz. The opa1611 provide a rail-to-rail output swing with a 2K2 load at 600mV, thereby increasing headroom and maximum dynamic range..

Juried Engineering NE5534P NE5534 Low-Noise High-Speed Audio Operational Amplifier IC Op-Amp DIP-8 Breadboard-Friendly (Pack of 10)

• The TL081CP JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit..
• Equivalent Input Noise Voltage 3.5 nV/√Hz Typ and High Slew Rate 13 V/µs Typ, Unity-Gain Bandwidth 10 MHz Typ and Wide Supply-Voltage Range ±3 V to ±20 V.
• Common-Mode Rejection Ratio 100 dB Typ and Low Harmonic Distortion.
• High DC Voltage Gain 100 V/mV Typ and Offset Nulling Capability.
• Peak-to-Peak Output Voltage Swing 32 V Typ With VCC± = ±18 V and RL = 600 Ω and External Compensation Capability.

Juried Engineering NE5534P NE5534 Low-Noise High-Speed Audio Operational Amplifier IC Op-Amp DIP-8 Breadboard-Friendly (Pack of 5)

• The TL081CP JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit..
• Unity-Gain Bandwidth 10 MHz Typ and Wide Supply-Voltage Range ±3 V to ±20 V, Equivalent Input Noise Voltage 3.5 nV/√Hz Typ and High Slew Rate 13 V/µs Typ.
• Common-Mode Rejection Ratio 100 dB Typ and Low Harmonic Distortion.
• High DC Voltage Gain 100 V/mV Typ and Offset Nulling Capability.
• Peak-to-Peak Output Voltage Swing 32 V Typ With VCC± = ±18 V and RL = 600 Ω and External Compensation Capability.

CableVantage 2.4GHz 18dbi WiFi High Gain Yagi Antenna 2.4 GHz Yagi Antenna Booster RP-SMA for IEEE 802.11b, 802.11g, 802.11n Wireless LAN Bluetooth, Public Wireless Hotspot WiFi Antenna Booster

• adjustable up/down direction ~ this is most critical part of using yagi antenna which got narrow direction beamwidth, one need flexbility to point sharply by adjusting direction up/down and left/right..
• Frequency Range-MHz 2400 ~ 2468 Bandwidth-MHz 83 Gain-dBi 18dBi.
• 18dBi 2.4GHz-2.5GHz High-Gain Vertical or Horizontal Directional.

Juried Engineering OPA134PA OPA134 - Mono HiFi SoundPlus High Performance Audio Operational Amplifiers Op-Amp Breadboard-Friendly (Pack of 1)

• Superior Sound Quality and High Open-Loop Gain: 120 dB (600 Ω).
• Ultra Low Distortion: 0.00008% and Wide Supply Range: ±2.5 V to ±18 V.
• High Speed: Slew Rate: 20 V/µs Bandwidth: 8 MHz.

Foxeer Pagoda PRO 5.8G FPV Antenna SMA Pagoda Antenna RHCP 150mm Omnidirectional Antenna for Long Range FPV Racing Drone Quadcopeter TX/RX Black

• Good radiation efficiency. Most FR4-based patches have terrible efficiency because FR4 is very lossy at 5.8 GHz.    Additionally, most array....
• Exceptionally good axial ratio, not just directly perpendicular to the patch but also off-center..
• High gain, though not as high as the theoretical gain of an array with 7 ?lements.    This is because maximizing the gain would result in high....
• Very low sidelobes, almost all energy is concentrated in the main lobe.    This increases the width of the main lobe, at the expense of some gain..

1pc PE4302 Numerical Control Attenuator Parallel Immediate Mode 1MHz~4GHz, Program Control Gain Attenuation Range is from 0 to 31.5DB

• This is a PE4302 numerical control RF attenuator module.
• The parallel immediate mode is simple and easy to use.
• Bandwidth is wide and can be 1MHz to 4GHz.
• Program control gain attenuation range is from 0 to 31.5DB.
• The module supports parallel port and serial port mode as well as power on state selection function.