Top Wide Supply Voltage Range
Furrion AC/DC Distribution Panel - Wall Mount with AC & DC Power Distribution for Both 30 Amp and 50 Amp Power Converters - FDP12WA-BL
- 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48V devices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the actual current is depended on the load. No matter how many voltage is adjusted, the current is 10A and can not be regulated. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A..
- 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise..
- 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter..
- 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from....
Check StockAOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
- Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
- This is a pre-amplifier, bass frequency....
- DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
- Speaker impedance: bass speaker impedance: 2-8 ohm.
- You can use a good switching power supply adapter, laptop switching power supply, or rectified filter transformer power supply, you can also use....
Check StockON Semiconductor LM339DR2G Amplifier; Comparator, Quad Single Supply 14-Pin SOIC (Nonreturnable) (10 pieces)
- Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typical) Per Comparator.
- Low Input Offset Current: 3 nA (Typical).
Check StockFonte KDM-MFX9350 350W ATX Slimline Power Supply for HP ProLiant N36L N40L N54L 658553-001 630295-001 620827-001
- 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V....
- 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat....
- 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer....
- 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from damage. Note: the default....
- 【Wide Application】 This power supply has variable application. It can be used as a 5V 12V 24V 30V 36V 48V power supply for RV, Car, Labtop,....
Check StockJuried Engineering LM339N LM339 Quad Differential Comparator Industrial Grade Breadboard-Friendly IC DIP-14 (1 Piece)
- Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typical) Per Comparator.
- Low Input Offset Current: 3 nA (Typical).
Check Stock
UMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi
- ❃❃ Package Included：3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
- ❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
- ❃❃ACS712 Hall Effect Current Sensor Module：Chip: ACS712ELC-30A.
- Pin 5V power supply, on-board power indicator.
- ❃❃Voltage Sensor Module：Voltage input range: DC0-25V.
- input : Terminal cathode connected to VCC, GND negative pole.
- Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
- ❃❃Perfect Combination：Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
Check StockDROK 24V Power Supply AC 110V/220V to DC 0-24V 20A 480W Buck Converter Variable Adjustable Adapter Regulated 5V 12V 24V Volt Switching Voltage LED Transformer 20A Amp Charger for Computer Lab
- 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-24V. This supply is suitable for 5V 9V 12V 24V....
- 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat....
- 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer....
- 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from damage. Note: the default....
- 【Wide Application】 This power supply has variable application. It can be used as a 5V 12V 24V power supply for RV, Car, Labtop, Computer, Lab,....
Check Stock
DCDC Converter, DROK Step Down Voltage Regulator Module DC 4.5-40V 36V 24V to 1.25-37V 12V 9V 5V 3V Variable Buck Converter Adjustable Electronic Power Supply Volt Reduce Transformer Stabilizer Board
- DROK DCDC converter input voltage range is DC 4.5-40v, output voltage range is DC 1.25-37v, the voltage is continuously adjustable. It is a non-isolated buck converter, can dial down voltage from 36v 30v 24v to 12v 5v 3.7v 3.5v 3.3v 2v..
- Analog Control: Our DC buck converter is designed with a adjustable potentiometer, the output voltage can be easily and accurately adjusted with a mini screwdriver. Clockwise to step up voltage and counterclockwise to step down voltage..
- Protection: This power supply supply step down regulator is with over-temperature and short-circuit protection, which protect your device from damaging and enhance its safety when using..
- Low Power-consumption: Although the voltage range is wide, this buck voltage module has a low power consumption of only about 3A when in static state..
- Note: Please make sure the input voltage is at least 1.5V greater than output voltage to ensure stable output.
- please note that there is no reversed connection protection, so check the polarity of input voltage before power on to avoid burning due to reversed connection.
- please add heatsink when the output power is larger than 15W..
Check StockJuried Engineering LM393P LM393 IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 5)
- Low Supply-Current Drain Independent of Supply Voltage: 0.4 mA (Typical) Per Comparator.
- Low Input Offset Current: 3 nA (Typical).
Check StockDC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board 50W+50W+100W (Bluetooth Amp),Bluetooth Amp
- tpa3116 amplifier 100W Subwoofer Amplifier Board.
- Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
- tpa3116 2x50w amplifier board Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
- This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board..
- bluetooth amplifer board DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
- Speaker impedance: bass speaker impedance: 2-8 ohm.
- You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power diy amplifier.
Check StockMCP6002-I/P DIP-8 1 MHz Gain Bandwidth Product, Low-Power Op Amp Pack of 6 Pcs
- Rail-to-Rail Output, Specified Temperature Range: Industrial Grade: −40°C to 125°C.
- Wide Bandwidth: 3 MHz, Input Bias Current: 1 pA.
- High Slew Rate: 2.4 V/µs, Input Noise Voltage: 39 nV/√Hz.
- Supply Voltage Range: 2.7 V to 16 V, Supply Current: 550 µA/Channel.
- Example Applications: E-Bike, Power Banks, Smoke detectors, Solar Inverters, Low-Power Motor Controls, Battery-Powered Instruments, Building Automation.
Check Stock
Kiro&Seeu 2PCS Microwave Doppler Radar Motion Detector Sensor RCWL-0516 Module Board Switch Compatible with Ar-duino Raspberry PI,Human Rat Cat Detector, (CWL-0516-MD-2P)
- This RCWL-0516 module has the characteristics of high sensitivity, high induction distance, high reliability, large induction angle, wide power supply voltage range, etc. it is widely used in various kinds of human body induction lighting and alarm and so on..
- The RCWL-0516 microwave radar sensor module can detect inert object at the condition that it has enough density, volume and it is in motion..
- Microwave radar sensor will sense motion through most anything. The more shielding there is, the less detection range you get. I can detect motion through glass, drywall walls, ceilings and floors. It is very sensitive. You might have to filter the power supply. Tutorials contact us..
- It can work with (for) arduino/nodemcu/wemos etc..
- It can detect human, cat, rat, water. Works with Arduino and Nodemcu Document link, please contact us..
- high sensitivity, high induction distance, high reliability, large induction angle, wide power supply voltage range ,it is widely used in various kinds of human body induction lighting and alarm and so on.
Check Stock
