Top Wifi Adapter For Raspberry Pi 3

Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Check Stock

Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero..
  • 【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder.
  • 【3-Port USB HUB】On-board three USB 2.0 Ports.
  • Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
  • 【How to Power】Power via USB Type-C 5V Power In port of X306.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X306 V1.1 Expansion Board.
  • Note: not inlcude Raspberry Pi board,18650 battery, GPIO Header & power adapter..
  • 【User Manual】Installation guide and user manual refer to Geekworm WiKi search X306..
Check Stock

Geekworm X820 Metal Case + Power Control Switch + Cooling Fan Compatible with Raspberry Pi 3B+/3B & X820 V3.0 SSD&HDD SATA Storage Board & X735/Rock64

  • Case Size(Installation): 11.3cm x 9.1cm x 6.2cm / 4.45inch x 3.58inch x 2.44inch.
  • Note: the Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)..
  • This is metal case with super mute cooling fan kit for X820 V3.0 SSD/HDD storage board user, very easy to install, perfectly compatible with Raspberry Pi 3 Model B+/3B/2B/B+/Rock64 & X820 V3.0 Board&X735 Board..
  • Note: Raspberry Pi, X820 board, SSD/HDD and power adapter is not included in the packing list..
  • Installation Video refer to Geekworm WiKi search X820.
  • Power switch with beatiful LED indicator to control the power of X820 V3.0 and the Raspberry pi.
  • Support super mute cooling fan, hundreds of round cooling holes on both side of the case, almost no weekeness for the bluetooth and WIFI signal..
Check Stock

NorthPada Raspberry Pi 3 Model B B+ A+ Plus Power Supply Charger AC Adapter Cord 5V 3A PSU Micro USB 5 Feet with Power On/Off Switch, with a USB C Adapter for Raspberry Pi 4 Model B, Pi 400

  • Input: AC 100-240V 0.3A 50/60Hz, Output: DC 5V 3000mA/3A.
  • Cable Length: 150cm/5Feet with On/Off Power Switch, Inline Noise Filter.
  • For Raspberry Pi 3 Model B B+ A+, Raspberry Pi 2 Model B, Raspberry Pi A/A+/B/B+, Raspberry Pi Zero, Raspberry Pi Pico, ASUS Tinker Board S.
  • Come with a micro USB to USB C Adapter, it can also support Raspberry Pi 4 Model B, Raspberry Pi 400.
  • Package included: 1 x 5V power supply with micro usb, 1 x micro USB to USB C Adapter.
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

Vemico Raspberry Pi 4 Model B 2GB Set RAM 2GB Base Starter Kit with SD Card, Heatsinks, Cooling Fan, Power Supply, White Case, Reading Card Device, Screwdriver

  • 【Powerful Function】 The Raspberry Pi 4 is a small computer that can be used in a variety of ways. External devices can be linked to increase the capabilities of the system. Computer vision, speech recognition, artificial intelligence, education, robot programming, and other industries can all benefit from this technology..
  • 【ARM Cortex A72 】 The raspberry pi 4 model b adopts the latest arm cortex-a72 architecture, which is also used in high-performance smartphones, and has evolved into a real pc. Cortex A72 has 15-instruction pipeline depth, compared to just 8 on the older model, and it also provides out-of-order execution so it’s not waiting for the output of one process to start on another. So, even at the same clock speed, Cortex-A72 processors will be significantly faster and use more power..
  • 【Raspberry Pi 4 VS Pi 3】It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems..
  • 【USB Type-C Power Adapter】5V/3. A USB Type-C power adapter and power cord wit....
Check Stock

Vemico Raspberry Pi 4 Model B 8GB Set RAM 8GB Base Starter Kit with SD Card, Heatsinks, Cooling Fan, HDMI Cable, Power Supply, Case, Reading Card Device, Screwdriver

  • 【Powerful Function】 The Raspberry Pi 4 is a small computer that can be used in a variety of ways. External devices can be linked to increase the capabilities of the system. Computer vision, speech recognition, artificial intelligence, education, robot programming, and other industries can all benefit from this technology..
  • 【ARM Cortex A72 】 The raspberry pi 4 model b adopts the latest arm cortex-a72 architecture, which is also used in high-performance smartphones, and has evolved into a real pc. Cortex A72 has 15-instruction pipeline depth, compared to just 8 on the older model, and it also provides out-of-order execution so it’s not waiting for the output of one process to start on another. So, even at the same clock speed, Cortex-A72 processors will be significantly faster and use more power..
  • 【Raspberry Pi 4 VS Pi 3】It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems..
  • 【USB Type-C Power Adapter】5V/3. A USB Type-C power adapter and power cord wit....
Check Stock

Vilros 8 Inch 1024x768 Screen and Stand for Raspberry Pi 4 & Raspberry PI 3

  • 8 Inch screen with 1024x768 resolution is encased in stand with a removable box on the back to hold the Raspberry Pi.
  • Connects to a raspberry pi via simple HDMI Connection-Inlcudes a Micro HDMI-HDMI Cable to connect the screen to a PI 4 and also includes a standard HDMI cable to connect a PI 3 to the Screen.
  • Includes double corded DC and USB-C power supply that powers the screen and the pi board- also Includes a micro-USB-USB-C Adapter to be used for pi 3.
  • Turn Your Raspberry Pi Board into a 8 inch desktop!!.
  • Note: Screen is a standard screen, this is NOT a Touchscreen---Does NOT include Raspberry Pi Motherboard.
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
  • The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....
Check Stock

Geekworm KVM-A4 Kit Compatible with PiKVM HDMI CSI for Raspberry Pi Zero 2W/Zero W Only(Not Include Raspberry Pi)

  • 【What is it】This kit allows user to realize a PiKVM / KVM project with Raspberry Pi Zero 2W/Zero W which can control a computer using a web browser!.
  • 【Compatiblity】for use with Raspberry Pi Zero 2W or Raspberry Pi Zero W only, NOT support Raspberry Pi Zero..
  • 【Function】Remotely turn on/ turn off / restart your computer.
  • reinstall the OS using the Virtual CD-ROM or Flash Drive.
  • Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc..
  • 【How to Power】Power Input: 5.1Vdc +/-5% , ≥3A.
  • Power Via USB Type-C port of X630-A4. (DON'T power via Raspberry Pi's micro USB port, because it is occupied as USB OTG.) Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND)..
  • 【Cooling Solution】Come with C296 aluminum alloy heatsink for heat dissipation of Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【What Included】1 x X630-A4 V1.1 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
  • 【Extra Needed】Raspberry Pi Zero 2W/Ze....
Check Stock

DIGISHUO 9 in 1 Complete Starter Kit Raspberry Pi 3 Model B Module&Two Cases&HDMI Cable&32G SD Card&Heatsink Kit&P Fan

  • The Raspberry Pi 3 Model B is the third generation Raspberry Pi.
  • This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.
  • Whilst maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi..
  • Additionally it adds wireless LAN & Bluetooth connectivity making it the ideal solution for powerful connected designs..
  • With other part will be a complete kit include sd card/adapter/case/hdmi cable/heatsink.
Check Stock

Vemico Raspberry Pi 4 Model B 4GB Set RAM 4GB Base Starter Kit with SD Card Heatsinks HDMI Cable Power Supply Black Case Reading Card Device Screwdriver

  • 【Powerful Function】 The Raspberry Pi 4 is a small computer that can be used in a variety of ways. External devices can be linked to increase the....
  • 【ARM Cortex A72 】 The raspberry pi 4 model b adopts the latest arm cortex-a72 architecture, which is also used in high-performance smartphones,....
  • 【Raspberry Pi 4 VS Pi 3】It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the....
  • 【USB Type-C Power Adapter】5V/3. A USB Type-C power adapter and power cord with an ON/OFF switch, which is the official recommended amperage for....
  • 【Package Included】1 x Raspberry Pi 4 B board (4GB), 1 x 32GB SD Card, 1 x SD Card Reader, 3 x Heatsinks, 1 x ABS Black Cover, 1 x Network Cable, 1....
Check Stock