Top Winch Mounting Plate

Hooke Road Tundra Front Winch Bumper +Rear Bumper Compatible with Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 90 lbs)..
Check Stock

Hooke Road Tundra Front Winch Bumper & Rear Bumper Kit for Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 Pickup Truck (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 80 lbs)..
Check Stock

Winch Mounting Bracket Plate Universal Towing Winch Mounts Heavy Duty Winch Operation Mounting Plate for 600lbs to 3500lbs Trailer Winch Mount

  • The winch bracket is suitable for600lbs to 3500lbs hand winches or other equipment. Please carefully confirm the size information before buying (second picture)!.
  • Universal mounting winch bracket is made of high quality A36 steel, the thickness of the support steel plate reaches 5.5mm, Working Load: 600lbs to 3500lbs..
  • The maximum vertical tension of the bracket can meet the use of 3500 pounds hand brake..
  • Tough black spray coating finish can prevent rust and meet the requirements for use in humid environments..
  • Winch mounting plate to help your hand winch to mount available on the ground or on the wall, perfect for boat trailer, trucks, ATV, lawn equipment and many lift heavy objects applications.ount available on the ground or on the wall..
Check Stock

SuperATV Black Ops 6000 lb Winch with Winch Mounting Plate for 2020+ Polaris RZR PRO XP/RZR PRO XP 4 | Complete RZR Winch Kit Ready to Install!

  • 【 Fits】2020+ Polaris RZR PRO XP / RZR PRO XP 4 | Please Note: Not compatible with Polaris front high coverage bumper, part # 2883749 / not compatible with winches using a 76mm x 124mm (3" x 4 7/8") mounting bolt pattern..
  • 【Complete, Bolt-On Ready Winch Kit】Ready to make sure you are not stranded on the trail? This kit is exactly what you need. It includes our Black Ops 6000 lb winch and a winch mounting kit specifically made to fit perfectly on your Polaris RZR. A strong mount is just as important as a strong winch—don’t get caught with a mount that can’t take the weight of your machine..
  • 【6000 lb SuperATV Winch】100% waterproof Polaris RZR winch | Powerful permanent magnet 12V 1.9 Hp Dc Motor | 6000 lb. rated line pull synthetic 50' rope | 266:1 Gear ratio | Winch dimensions (Lxwxh) = 14.56” X 4.41” X 4.86” | Mounting holes: 76mm x 169mm (3" x 6 5/8") | Fairlead bolt pattern: 152mm (5.98").
  • 【Machine Specific Mounting Plate】Mount made specifically to fit your PRO XP | Made with 3/16” steel plating | UV-r....
Check Stock

SuperATV 6000 LB Black Ops Winch with Winch Mounting Plate for 2016+ Honda Pioneer 1000/1000-5 / Deluxe | 2017+ Pioneer 1000 Limited Edition / 1000-5 Limited Edition | 3/16' Steel Plating!

  • ✔️【 Fits】2016+ Honda Pioneer 1000 / Pioneer 1000-5 / 1000 Deluxe / Pioneer 1000-5 Deluxe | 2017+ Pioneer 1000 Limited Edition / 1000-5 Limited Edition | Compatible with many OEM and aftermarket winches | Mounting Holes: 3” x 6 5/8” (76mm x 169mm) | Fairlead Bolt Pattern: 5.98” (152mm).
  • 【 The Strength You Need】Your monster Honda Pioneer 1000 spends a ton of time on the trail, and your favorite pastime is rescuing lesser riders from the mud hole. But if you don’t have a winch mount built to take the force, you won’t be rescuing anybody! If you want to be serious on the trails, you need a serious Honda Pioneer Winch and Winch Mount! Our strength is one of the best in the industry!.
  • 【6000LB SuperATV Winch】100% Waterproof Winch | Powerful Permanent Magnet 12V 1.9 HP DC Motor | 6000 Lb. Rated Line Pull Synthetic 50' Rope | 266:1 Gear Ratio | Winch Dimensions (LxWxH) = 14.56” X 4.41” X 4.86”.
  • 【Machine Specific Mounting Plate】Our 6000 LB Winch is made with 3/16” heavy duty steel plating | UV-Resistant wrinkle black powder coating prevents corrosion,.
  • 【Installation】No Drilling Required! Your UTV winch and winch mounting kit comes with all of the hardware you'll need for an easy installation..
Check Stock

Rugged Ridge 11543.15 Winch Mounting Plate, Stamped Bumper, Steel; 13-18 Jeep Wrangler JK

  • Steel Winch Plate: Fits the factory steel front bumpers on the 2013 Jeep Wrangler 10th Anniversary Rubicon, 2014 Rubicon X, and 2015 Rubicon Hard Rock models. Heavy-duty winch plate incorporates high strength class 10.9 hardware for secure mounting.
  • Winch Plate for Jeeps: The versatile two-piece design allows Jeep owners to mount a winch while hiding the vehicle's frame for a sleeker look. Features an e-coated and powder coated finish for tough corrosion resistance..
  • Note: Requires Mopar factory fairlead adapter plate - for centered fairlead placement use OE number 82214787 or for off-center fairlead placement use OE number 82214851..
  • Rugged Ridge Jeep Parts: Count on Rugged Ridge to provide you with proven Jeep parts and accessories like bumpers, lift kits, wheels, interior accessories, floor liners and more for varying Jeep models.
  • Five Year Warranty: Our Rugged Ridge products are covered by an industry leading 5 year warranty and Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusion.
Check Stock

Zostra Electric Winch 12v 6000lbs Boat Trailer Winch with Remote Synthetic Rope 1/4 in x 55 ft Hook Wireless Remote Handlebar Switch Automatic Braking Waterproof for ATV UTV Powersports Off Road

  • [SYNTHETIC ROPE]The 1/4in/16m, 10,000lb, 55ft/6.3cm-diameter, syntuff synthetic multistrand rope is abrasion resistant and includes anti-bind technology. This winch rope is not only stronger than traditional steel cables, but also lighter and safer..
  • 【Kit Includes】1 x 6000lbs Winch with Synthetic Rope, 1 x Mounting Plate, 1 x Heavy Duty Hook, 1 x Manual Remote, 1 x Wireless Remote, 4 x Joint Protective Cap, 1 x Aluminium Hawse Fairlead, Mounting Bolts, 1 Spring Plate, 1 x Rubber Stopper. Considering that some of our customers have the need to lift items or pull heavier and larger items, we have added a movable pulley hook to this winch, which allows you to achieve a variety of work uses with only one winch..
Check Stock

REINDEER Winch Mounting Plate Winch Cradle 8000lbs-13000lbs Capacity Winches Trucks ATV 4X4

  • [SPECIFICATION]It is made of 6mm thickness of solid steel.Package Contents:1 x Universal Winch Mounting Plate.
  • [WIDE APPLICATION]:Suitable for most kinds of winch in the 8000lbs-13000lbs capacity range.Suitable for trucks, ATV, 4x4, trailers and any 4WD vehicles.
  • [WEATHER RESISTANT]:The durable black powder coating ensures that the winch mounting plate is not easily rusted and remains in its original condition even if it is placed outdoors for a long time or gets wet by rain.
  • [EASY TO INSTALL]:You can install directly to the frame,and with convenient roller fairlead installation point.
  • [WARRANTY]: Lifetime technical support and one-year limited warranty..If there is any problem during the purchase period, please feel free to contact us, and we will provide the most professional and timely service.
Check Stock

SuperATV Black Ops 4500 LB Winch with Winch Mounting Plate for 2014-2018 Polaris RZR XP 1000 / RZR XP 4 1000 | Complete RZR Winch & Winch Mount Kit Ready for Install!

  • ✔️【 Fits】2014-2018 Polaris RZR XP 1000 / RZR XP 4 1000.
  • 【Complete, Bolt-On Ready Winch Kit】 Includes our Black Ops 4500 lb. SuperATV Winch and a heavy-duty Winch Mounting Kit specifically made to fit perfectly on your Polaris RZR. | Powder coated for long-lasting strength and then torture tested to ensure a lifetime of dependable performance..
  • 【4500 LB SuperATV Winch】100% Waterproof Polaris Winch | Permanent Magnet 12V 1.3 Hp Dc Motor | 4500 Lb. Rated Line Pull Synthetic 50' Rope | 166:1 Gear Ratio | Mounting Holes: 3” x 6 5/8” (76mm x 169mm) / 3” x 4 7/8” (76mm x 124mm) | Fairlead Bolt Pattern:  5.98” (152mm) / 4.29” (109mm).
  • 【Machine Specific Mounting Plate】Mounts Polaris RZR Winch in factory location (above front differential) | Made with 3/16” steel plating | UV-resistant wrinkle black powder coating prevents corrosion | No drilling required.
Check Stock

Hooke Road for Ford F150 09-14 Steel Front Winch Bumper + Rear Bumper Compatible with F-150 2009 2010 2011 2012 2013 2014 (Excluding Raptor) Pickup Truck

  • FITMENT: Both front and rear bumper for Ford F150 2009-2014 (Excluding Raptor) Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors.).
  • DESIGN: Aggressive, angular off-road design and full protection bumpers. Front bumper equipped with a 12000-pound capacity winch plate. Rear bumper compatible with factory receiver hitch. Rear bumper include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for front and back bumper main body.
  • 8-gauge(11/64 Inch) for mounting bracket plates..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 92 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 65 lbs)..
Check Stock

Winch Hitch Cradle Mount Plate, DACK Universal Receiver 10 x 4 1/2 Winch Mounting with 2''Receiver Hitch for Recovery Winches Heavy-Duty 15000Lbs Capacity for ATV UTV Truck

  • ...hes, Package includes hitch pin and clip, as well as 10" on center fairlead bolt pattern and 10" x 4 1/2" standard winch mount pattern ensure the installation is more convenient..
  • 【Suitable for Most Vehicles】: The standard universal size ensures that the mounting plate is suitable for any four-wheel drive vehicle: truck, ATV, 4x4, trailer, etc. Suitable for standard 2 inch receiver..
  • 【WORRY-FREE VOUCHSAFING】DACK Winch Hitch Cradle Mount comes with Lifetime support and the hardware is rigorously tested before shipment. If you have any questions about the product installation, please feel free to contact us and we will give you a satisfactory solution..
Check Stock

ZEAK Cradle Winch Recovery Mounting Plate, 10'' × 4-1/2‘’ Universal fit Winch Mounting Plate, 15000 lb. Capacity

  • ZEAK cradle winch mounting plate own an Anti-rust powder coat finish,a durable black powder coating, which can be guaranteed not to rust easily and easy to clean..
  • Suitable for trucks, trailers and any other 4WD vehicles..
  • Standard 10’’x4-1/2’’ winch mount pattern,it’s easy for everyone to install this cradle winch.
  • The Zeak cradle winch mounting made of heavy duty steel ,durable construction.It is suitable for 8000lb to 15000lb winches,be tailor for 4WD competiton.
  • ZEAK products provide lifetime technical support.If you have any problem please contact us at any time..
Check Stock