Top Window Guide Bushing

Redding Competition Bushing 3-Die Neck Sizer Set 6.5 Creedmoor

  • Competition Bushing Sizing Die -- With this die, the cartridge case is completely supported and alig.
  • The Body Die -- is designed to full length resize the case body only and bump the shoulder position.
  • Competition Seating Die -- The bullet guide to seating stem fit is so precise that the seating stem.
Check Stock

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock

Milescraft 1228 MetalBushingSet - 9 pc Router Template Guide Set 12280003

  • Universal 2 piece Bushing system is compatible with all Router sub-bases with a 1-3/16″ (30. 2mm) center hole diameter.
  • Outer diameters of 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″, and 51/64″.
  • Comes in a locking storage case with peg hook and a foam insert to keep the accessories in position.
  • Includes top hat adaptor and can be used with all Miles craft turn-n-lock products.
  • 1-3/16” O.D. wave washer included, which provides resistance against the locking nut to keep your template guide bushing firmly locked in place.
Check Stock

ATVWorks Compatible/Replacement for Kawasaki Gas Mule 4000/4010 Drive Primary Converter/Clutch Rebuild Kit 49093-0025/49093-0023

  • These parts will help you rebuild your Drive Converter / Drive Clutch..
  • Rebuilds Drive Converter 49093-0023 & 49093-0025.
  • (1) Spring 92145-0639, (3) Roller 92122-1204, (3) Pin 92043-1572, (6) Spacer 92026-1512, (6) Guide 13070-1330, (1) Bushing 92028-1861, & (1) Bushing....
  • This product will ship FAST & FREE using Postal mail Service ONLY. Please include your post office box number if you do not receive mail at your....
Check Stock

POWERTEC 71051 Router Template Guide Set, Fits Porter Cable Style Router Sub Bases | 10pc Solid Brass Guides w/ Molded Carrying Case

  • INCLUDES: 10-Piece Router Template Guide Bushing Set with (8) guide bushings, (2) lock nuts and a carrying case.
Check Stock

Milescraft 2312 5mm ShelfPinBit - For drilling shelf pin holes

  • Self-centering boring bits in 5 mm diameter.
  • 3/8" Guide Bushing for precise and repeatable shelf pin hole locations.
  • Can be used with Milescraft 1316 CabinetMate or other templates with 3/8" guide holes.
Check Stock

BushingFix® Si2Kit™ - Replacement Automatic Transmission Shift Cable Bushing and Repair Kit

  • Please look at the picture of the cable ends this kit repairs before you order! If your cable end is different please contact us..
  • Direct replacement for a proper fit every time. A complete list of vehicle fitment can be seen in the Application Guide or on our website..
  • Lifetime Warranty - This part has undergone a rigorous inspection to ensure high quality.
  • Kit includes replacement bushing and application specific installation tools. Automatic Transmission Shifter Linkage Replacement Bushing..
  • Easy to install: Text and video instructions along with tech support to assist you with installation..
Check Stock

PIILOO Door Pin Guides & Door Hinge Liners & Door Bushing Removal Tool Compatible with Jeep Wrangler JK JKU JL JLU Sports Sahara Freedom Rubicon Unlimited Gladiator JT 2/4-Door 2007-2021 (17 PCS)

  • FITMENT--Perfectly compatible with Jeep Wrangler JK, JKU, JL, JLU, Sports, Sahara, Freedom, Rubicon, Unlimited, Gladiator, JT 2-Door and 4-Door 2007-2021. (NOTE: DOOR BUSHING REMOVAL TOOL DID NOT FIT TJ).
  • FUNCTION--This set of tool help you line up the door pin against the hinge and easily put the door back in place. Remove the corroded and worn door hinge liners and replace the new liners which are rust and corrosion resistance..
  • MATERIAL--The door pin guides are constructed with advanced CNC machined stainless steel, durability and never rust. The door hinge liners are made of high grade ABS plastic, anti-deformation and anti corrosion. The door bushing removal tool is made of aircraft grade integral iron structure, good rigidity, high precision and longer service life..
  • EASY INSTALLATION--Use the door pin guide to align the top cap and lower the door, so that the bottom is in place. Hit the door bushing removal tool with a hammer until the liner is completely removed. Install these while replacing the hinge liners and repairing the hinge bolts..
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

  • PERFECTLY MATCHED MULTIPLES: The DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16” to 1” Inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates.
  • COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches).
  • Fits 1/4-inch and thinner template material.
  • Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID.
  • IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
  • When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
  • These solid brass bushings will prevent damage to the bit and the bushings themselves.
  • EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded....
Check Stock

Edge Products CTS3 84130-3 Touch Screen OBD2 Monitor Gauge Scanner & EGT Probe Pyrometer Kit 98620 Compatible with 1996 Vehicles & Newer

  • MAKE STRAIGHT, ACCURATE DADOS AND RABBETS – Woodworkers asked us for a router guide / router jig that would make precise Dados, Rabbets, and Mortise....
  • WORKS WITH THE BORA WTX and NGX CLAMP EDGES – The perfect addition to your woodshop, this dado router guide will help with all of your woodworking....
  • WORKS WITH ALMOST ALL MAKE/MODEL ROUTER – Includes a 1” standard guide bushing for easy mounting (works with almost any routers). No drilling or....
  • VERSATILE CUTTING FOR WIDE DADOS – Cutting adjustment allows for cutting wide dado’s with a 1/4" 3/8" or 1/2" router bit.
  • LARGE PLATE SIZE FOR EASIER HANDLING – The large plate size ensures your router stays steady, and is easy to handle.
Check Stock

Tusk Clutch Lever Polished For SUZUKI LT-R 450 QUADRACER 2006-2009

  • See fitment guide image for additional Machines this item fits. Levers are made from durable die-cast aluminum..
  • Most models have a brass bushing for smoother operation and longer wear..
Check Stock