Top Window Regulator Motor Bushing

Uniweld RHP800 Nitrogen Regulator with 0-800 psi Delivery Pressure 2

  • Nitrogen Regulator, Delivery Pressure 0-800 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Dorman 741-138 Front Driver Side Power Window Motor and Regulator Assembly Compatible with Select Pontiac / Toyota Models

  • Trustworthy replacement - engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles.
  • Quality assured - extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life.
  • Easy installation - reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit.
  • Reliable design - engineered in North America and backed by long history of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
  • Engineered improvements enhance performance.
  • Quality tested to ensure trouble free installation, performance, and durability.
  • Plug & Play – No wire splicing necessary.
  • Combination window lift motor and window regulator ensures correct repair.
Check Stock

A-Premium Power Window Lift Motor Compatible with GMC Terrain 2012-2017 Chevrolet Sonic 2013-2019 Equinox 2012-2017 Cruze 2012-2015 Cruze Limited 2016

  • 【Directly Fit】OE Replacement 2 Pins Terminal Power Window Motor, Directly Fit.
  • 【Perfect Fitment-1】For "Front/Rear Left Driver Side" Models: Compatible with GMC Terrain 2012-2017 Sport Utility.
  • Compatible with Chevrolet Equinox 2012-2017 Sport Utility, Cruze 2012-2015（From 4/26/12） Sedan, Cruze Limited 2016 Sedan.
  • 【Perfect Fitment-2】Compatible with Chevrolet Sonic 2013-2019 Sedan/Hatchback---Rear Left Driver Side.
  • 【Premium Quality】Made by premium copper and high strength steel, durable window regulator motor.
  • With the powerful center, the performance of window motors is more reliable. These will help your save both money and time in the long run..
  • 【Reference Number】22823480, 95919458, 742-087, 42-1141, 382362, 742087, 421141.
Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure, CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-400 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

Uniweld RHP500 Nitrogen Regulator with 0-500 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection

  • Nitrogen Regulator, Delivery Pressure 0-500 PSI.
  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
  • Regulator can be used with CO2 with the Uniweld part no F36 adaptor, CO2 Cylinder (CGA320) to Nitrogen Regulator (CGA580) (purchased separately).
Check Stock

A-Premium Power Window Regulator with Motor Replacement for Jeep Liberty 02/25/2006-2007 Front Left Driver Side Hole Style

  • OE replacement power window regulator with motor, easy fit.
  • Compatible with Jeep Liberty 2006-2007, after 02/25/2006---Hole Style.
  • Regulator Attaches Directly to Glass w/Locator Pin and Hole.
  • Reference Number: 4589265AB, 4589265AD, 748-575.
  • 1 year unlimited-mileage quality guarantee.
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

A-Premium Power Window Lift Motor Compatible with Buick LeSabre 2000-2005 Pontiac Bonneville 2000-2005 Grand Am 1999-2005 Oldsmobile Alero Aurora(Installation Position Varies by Models)

  • 【Directly Fit】OE Replacement 2 Pins Terminal window motor, directly fit..
  • 【Perfect Fitment-1】For "Front Right Passenger Side/Rear Left Driver Side" Models: Compatible with Buick LeSabre 2000-2005.
  • Compatible with Oldsmobile Aurora 2001-2003.
  • Compatible with Pontiac Bonneville 2000-2005---Sedan.
  • 【Perfect Fitment-2】For "Front Left Driver Side" Models: Compatible with Oldsmobile Alero 1999-2004.
  • Compatible with Pontiac Grand Am 1999-2005---Coupe/Sedan.
  • 【Superior Quality】Made by premium copper and high strength steel, durable window regulator motor.
  • With the powerful center, the performance of window motors is more reliable. These will help your save both money and time in the long run..
  • 【Reference Number】12481873, 12481875, 22702135, 742-128, 742128.
Check Stock

ATPEAM Nitrogen Regulator with 0-800 PSI Delivery Pressure, CGA580 Inlet Connection with 1/4-Inch Male Flare Outlet Connection

  • Durable Brass Construction: Regulator body is constructed of forged brass with all brass connections and components..
  • Accurate Reading: This regulator features two clear, easy-to-read gauges. The side gauge measures the nitrogen pressure in the ac system and displays between 0 and 800 PSI. The top gauge has a 0-4000PSI display that lets you know how much nirtrogen gas is left inside the tank, so you won't have to worry about running out unexpectedly..
  • Reliable Connections: Featuring a CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection designed for easy installation. Fits HVAC Charging Hoses for Purging and Pressure Testing..
  • Large T-Style Handle: Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling..
  • Package includes:1 x Nitrogen Regulator+1 x T-handle. For its use with inert gases like Nitrogen, Argon, and Helium. Whether you’re just purging HVAC systems or doing tests, this Nitrogen Regulator will fulfill all of your work needs..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection Gauges

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Nitrogen Regulator, Delivery Pressure 0-4000 PSI..
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock

Uniweld Products RHP1500 Uni-Weld Nitrogen Regulator 1/4 Fnpt

  • CGA580 Inlet Connection, 1/4 Inch Male Flare Outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots.
  • Nitrogen Regulator, Delivery Pressure 0-400 PSI.
  • Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system).
  • Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
Check Stock