Top Window Regulator Motor Gear Removal

Dorman 741-138 Front Driver Side Power Window Motor and Regulator Assembly Compatible with Select Pontiac / Toyota Models

  • Trustworthy replacement - engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles.
  • Quality assured - extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life.
  • Easy installation - reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit.
  • Reliable design - engineered in North America and backed by long history of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
  • Engineered improvements enhance performance.
  • Quality tested to ensure trouble free installation, performance, and durability.
  • Plug & Play – No wire splicing necessary.
  • Combination window lift motor and window regulator ensures correct repair.
Check Stock

American Orthopaedic Cast Cutter, Replacement Blades Titanium Nitride Coated 2.5” (6.1cm)

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock

A-Premium Power Window Lift Motor Compatible with GMC Terrain 2012-2017 Chevrolet Sonic 2013-2019 Equinox 2012-2017 Cruze 2012-2015 Cruze Limited 2016

  • 【Directly Fit】OE Replacement 2 Pins Terminal Power Window Motor, Directly Fit.
  • 【Perfect Fitment-1】For "Front/Rear Left Driver Side" Models: Compatible with GMC Terrain 2012-2017 Sport Utility.
  • Compatible with Chevrolet Equinox 2012-2017 Sport Utility, Cruze 2012-2015（From 4/26/12） Sedan, Cruze Limited 2016 Sedan.
  • 【Perfect Fitment-2】Compatible with Chevrolet Sonic 2013-2019 Sedan/Hatchback---Rear Left Driver Side.
  • 【Premium Quality】Made by premium copper and high strength steel, durable window regulator motor.
  • With the powerful center, the performance of window motors is more reliable. These will help your save both money and time in the long run..
  • 【Reference Number】22823480, 95919458, 742-087, 42-1141, 382362, 742087, 421141.
Check Stock

BAOSHISHAN Electric Cast Cutter Plaster Saw Cast Saw for Plaster Bandage with 3 Saw Blades 110V Red

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock

A-Premium Power Window Regulator with Motor Replacement for Jeep Liberty 02/25/2006-2007 Front Left Driver Side Hole Style

  • OE replacement power window regulator with motor, easy fit.
  • Compatible with Jeep Liberty 2006-2007, after 02/25/2006---Hole Style.
  • Regulator Attaches Directly to Glass w/Locator Pin and Hole.
  • Reference Number: 4589265AB, 4589265AD, 748-575.
  • 1 year unlimited-mileage quality guarantee.
Check Stock

BAOSHISHAN Cast Removal Saw Cast Cutter Electric Plaster Saw Oscillating Speed Adjustable for Tearing Polymeric Materials 110V BLUE

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

Makita GD0800C 1/4\ SJS™ Die Grinder, Teal

  • Powerful 6. 6 AMP motor delivers 7, 000-28, 000 RPM for faster material removal.
  • SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load.
  • Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
  • Electronic current limiter helps protect the motor from overload.
  • Directional air-flow vents channel the tool's air output away from the user's face.
  • Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life.
  • Zig-zag varnish protects the armature coil from dust and debris for longer motor life.
Check Stock

A-Premium Power Window Lift Motor Compatible with Buick LeSabre 2000-2005 Pontiac Bonneville 2000-2005 Grand Am 1999-2005 Oldsmobile Alero Aurora(Installation Position Varies by Models)

  • 【Directly Fit】OE Replacement 2 Pins Terminal window motor, directly fit..
  • 【Perfect Fitment-1】For "Front Right Passenger Side/Rear Left Driver Side" Models: Compatible with Buick LeSabre 2000-2005.
  • Compatible with Oldsmobile Aurora 2001-2003.
  • Compatible with Pontiac Bonneville 2000-2005---Sedan.
  • 【Perfect Fitment-2】For "Front Left Driver Side" Models: Compatible with Oldsmobile Alero 1999-2004.
  • Compatible with Pontiac Grand Am 1999-2005---Coupe/Sedan.
  • 【Superior Quality】Made by premium copper and high strength steel, durable window regulator motor.
  • With the powerful center, the performance of window motors is more reliable. These will help your save both money and time in the long run..
  • 【Reference Number】12481873, 12481875, 22702135, 742-128, 742128.
Check Stock

Orion Motor Tech 3\ 4\ 6\ 8\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • a 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • a 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and an 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside.
  • the 8 in. puller can be used in 4 different positions to deal with both medium and large parts..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that th....
Check Stock

LICHAMP Tape Measure 16 ft, 6 Pack Bulk Easy Read Measuring Tape Retractable with Fractions 1/8, Measurement Tape 16-Foot by 3/4-Inch

  • 5:1 gear ratio of the retractable tape measure is designed for 5 times faster blade rewind.
  • Blade release button for easy blade pull out.
  • Spring loaded caribiner attachment for easy transportation.
  • Rust-resistant coating prolongs blade life.
  • Dirt removal window to empty dust particles inside of tool.
  • Belt clip for easy attachment and storage.
  • 5:1 gear ratio for 5X faster blade rewind.
  • Blade Release Button for easy blade pull out.
  • Spring Loaded Caribiner Attachment for easy transportation.
  • Rust-Resistant Coating prolongs blade life.
  • Dirt Removal Window to empty dust particles inside of tool.
Check Stock

Dorman 751-739 Front Driver Side Power Window Regulator And Motor Assembly Compatible with Select Chevrolet Models (OE FIX)

  • Improved replacement - this motor and regulator assembly features enhancements over the original design for greater reliability.
  • Failure-resistant design - incorporates redesigned window slide block for significantly greater durability than the original equipment design.
  • Simple replacement - no special tools are required to install this regulator assembly.
  • Quality engineering - this part was redesigned for greater durability using finite element analysis, in-door cycle testing and proprietary slide block compression testing.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock