Top Window Welding Clamp

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps

  • Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders..
  • NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs..
  • OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability..
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • USA-made 2 AWG heavy duty welding cable (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resis....
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Amazon Basics Locking Pliers - Welding Clamp 9-inch

  • 9-inch locking pliers and welding clamp tool for welding applications and securing holding awkwardly shaped items.
  • Includes (1) 9-inch locking pliers and welding clamp tool made of alloy steel with a rust-resistant nickel-plated finish.
  • U-shaped jaws offer better visibility and more space to work.
  • Screw-adjustable locking mechanism ensures ultimate locking force.
  • Classic trigger release quickly and effortlessly unlocks the tool.
Check Stock

4 Inch Heavy Duty Malleable C Clamps for Woodworking Welding Automotive Carpentry Building 4 Pack

  • 4 Inch C Clamp: Use this set of 4 c clamps for woodworking, metal work, welding, automotive, or furniture manufacturing.
  • Multi-Use: The welding face clamp has a sliding handle that will help reduce hand fatigue while ensuring a strong, secure hold on any wood and metals.
  • Clamping Range: Our c clamp set features a screw and thread design that allows you to freely control the clamping range to your needs.
  • Dimensions: Each 4 inch c clamp measures 8 x 4 x 0.6 inches in length.
  • Reliable Quality: The black c clamps for metal working are made from malleable iron that won’t easily break after long-term use.
Check Stock

IRWIN VISE-GRIP Original Locking Pliers with Swivel Pads, 11-Inch (20)

  • PREMIUM HIGH-CARBON STEEL MATERIAL - The welding clamp tools set is made of heat-treated high-quality high-carbon steel material, with high hardness, large torque, strong and tough, stable and reliable. In addition, the product has a nickel-plated coating to prevent rust and corrosion, and has a long service life..
  • ADJUSTABLE SWIVEL PADS AND SAFE TRIGGER RELEASE - The wood working locking pliers come with a swivel pads, which can work on tapered, awkward and delicate objects without damaging the surface of the object. The product is equipped with a trigger release, which can provide quick release to provide maximum locking force and help prevent accidental release..
  • COMFORTABLE HANDLE AND ADJUSTABLE SCREWS - The handle of the C-clamp locking pliers adopt an ergonomic design, is easy to open, has good comfort and control, and can be grasped from any angle to provide better grip. The C-clamp welding tools come with adjustable screws to adjust size and pressure to provide firm clamping force during work..
  • WIDE RANGE OF USES - The C-clamp locking pliers have a wide range of uses. The large opening jaws can fix and clamp objects of various shapes and materials, which are very suitable for wood working, welding, electrician maintenance and so on. In addition,....
Check Stock

Welding Ground Clamp 500A Electroplated Welding Earth Clip for Manual Welder Copper US Type Dutch Type(US Type)

  • ▶ GOOD WEAR RESISTANCE---This welding ground clamp is processed by electroplating, having good wear resistance, could be used for a long period.
  • ▶ GOOD CONDUCTIVITY---Adopting high quality copper, the welding ground clamp has good conductivity, easy to assemble and use.
  • ▶ PERFECT REPLACEMENT---This welding ground clamp is perfect replacement part for manual welder, with stable performance, high reliability.
  • ▶ SPECIFICATION---Condition: 100% brand new.
  • Size: 20 × 9 × 3cm / 7.9 × 3.5 × 1.2in.
  • ▶ SUPERIOR AFTER SALE SUPPORT---Please feel free to contact us for your any problems about our product. It is our pleasure to service you. Do not doubt your importance to us.
Check Stock

12Pcs Hand Tool Toggle Clamp, 220lbs Capacity Quick-Release Horizontal Clamp Antislip Red 201B Latch Hand Tool, Heavy Duty Toggle Clamp for Woodworking by HNBun

  • 【Heavy Duty Toggle Clamp】Hand tool toggle clamp are made of carbon steel with zinc plated coating, rust resistance and corrosion resistance, durable and long lasting.
  • Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips.
  • 【201-B Quick Release Tool】201B Toggle Clamp Total length: 145mm / 5.7in, Height: 98mm / 3.9in, M6 screws (M6x50) are available for quick release toggle clamp, Holding capacity force: 220 lbs / 100 kg.
  • 【Wide Application】Horizontal toggle clamp latches are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more.
  • 【12Pcs Hand Tool Toggle Clamp】Package include 12pcs 201B antislip red horizontal clamp, suitable for fast fixing of metal plates and boards for woodworking, machine operations, , welding, molds.
  • 【Easy TO Use】Horizontal clamp are equipped with adjustable rubber pressure for easy, safe and comfortable operation.
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock