Top Windscreen Blade Holder

X AUTOHAUX Rear Windshield Wiper Blade Arm Set for Volvo V60 2015-2017 - 310mm 12inch

  • Note: Please make certain this is the correct application type of windscreen kit for your vehicle..
Check Stock

YYST Clear Light saber Wall Mount Wall Rack Wall Holder - Hardware Included.

  • Patented Product for keeping lightsaber vertically displayed.Quantity : One clear blade holder , one wall mount clip. Hardware included..
  • Clear - Both the blade holder and the wall mount clip are clear. Does its job without being visually obtrusive. Before installing , Please peel off....
  • Easy to take in and take out - Put your light saber into the blade holder and push the tip into the wall mount clip..
  • Light Saber not included. 5 Pounds - the blade holder is very thick, which withstands up to 5 Pounds..
  • Screw Covers included - the screw covers are provided to hide your screws..
Check Stock

Parker Safety Razor, SRB Straight Edge Disposable Blade Professional Barber Straight Edge Razor with Stainless Steel Blade Arm, 5 Parker Premium Professional Blades Included

  • ...dge razor and is designed for luxury shaves at home or salon. However, because this is a disposable blade razor, no sharpening or stropping is required. Simply change the blade. This razor is the choice of professional barbers and shave parlors worldwide..
  • SNAP/ LOCK BLADE HOLDER: The Parker straight razor features a snap/lock blade handle in which a half blade or single-edge blade fits securely. It is easy to change the blade..
  • ROUNDED END OF BLADE COMPARTMENT: The straight razor comes with a rounded blade holder for precise beard edging, shaping, and minimizing cuts while shaving..
  • FOR PROFESSIONAL USE: This classic men’s razor gives you quality shaves at home. It is also a favorite of professionals where it is used in salons, barber shops and shave parlors worldwide..
  • 5 PREMIUM PARKER PLATINUM BLADES INCLUDED: This straight blade/straight edge razor comes with 5 Premium Parker Platinum blades. However, you can use a professional half blade razor blade, or you can snap any standard double edge razor blade in half and insert it in the blade holder for use..
Check Stock

Outdoor Edge BOA - Folding Utility Razor Blade Box Cutter Knife with Ergonomic Polymer Handle and Pocket Clip Orange 3-Blades

  • PERECT ERGONOMICS – Extensive jimping on the stainless-steel blade holder provides a secure, tactile grip allowing for precise control and for....
  • EASY BLADE CHANGE – The blade holder features a thumb activated blade release button with guard for safe and secure blade changes with the flick of....
  • ONE HAND OPENING – Integrated thumb stud allows for easy one hand opening making this a great addition to any job site or home project..
  • DURABLE CONSTRUCTION – The 420J2 stainless-steel blade holder is mounted to a (Black, Orange) sure-grip textured ABS polymer handle with an....
  • SERVICE FOR LIFE – Outdoor Edge produces quality cutting tools that are built to last.
  • if you have a problem with your Outdoor Edge knife contact....
Check Stock

DISE Coconut Scraper Machine Electric Dual Speed Excellent Stability 120-230 Voltes,100W,60Hz Multicolor

  • Clean the surface as well as the bottom of the unit and fox the blade on the motor haft using blade holder..
  • Fix the unit on the flat surface by rotating of the knob in (Lock) postion .Make sure that unit is fixed to the floor firmly..
  • Plug in the power cord to the power supply and turn on the swich.Select the desired speed..
  • Push the press switch downwards to make the blades rotate and use the other hand to scrape the coconut..
  • One Finished the scraping switch off and unplug the unit, detach the blade with the bladed holder and unlock the suction, clean the blade and place id safely in the blade holder..
Check Stock

Shimomura Kihan 35098 Tonkatsu Shop Slicer, Julienne Vegetables, Made in Japan, Smart Cabbage, 0.04 inch (1 mm) Slicer, Safe Holder

  • Size (approximate): Width 3.6 x Length 10.6 x Height 0.6 inches (9.2 x 27 x 1.5 cm), Blade Length 3.1 inches (8 cm), Slicing Surface Width 3.0 x Length 7.1 inches (7.5 x 18 cm), Holder Width 3.8 x Depth 2.4 x Height 1.2 inches.
  • Materials: Main Body/Holder: ABS (Acrylonitrile Butadiene Styrene) Resin (Heat Resistant up to 176°F (80°C)), Blade: Stainless steel.
  • Size (W x L x H): Approx. 3.6 x 10.6 x 0.6 inches (9.2 x 27.
  • Product Weight: Approx. 2.9 oz (85 g) (Holder: 0.7 oz (20 g).
  • Heat resistant temperature: 176°F (80°C) (resin part).
Check Stock

YYST Clear Light Saber Wall Mount Wall Rack Wall Holder - 2 Pack

  • Patented Product for keeping lightsaber vertically displayed. Quantity : 2 clear blade holders , 2 wall mount clips. Hardware included..
  • Clear - Both the blade holder and the wall mount clip are clear. Does its job without being visually obtrusive. Before installing , Please peel off the white film of the acrylic , which protects the acrylic from scratches. Then you will see very clear acrylic..
  • Easy to take in and take out - Put your light saber into the blade holder and push the tip into the wall mount clip..
  • Light Saber not included. 5 Pounds - the blade holder is very thick, which withstands up to 5 Pounds..
  • Screw Covers included - the screw covers are provided to hide your screws..
Check Stock

Fanimation BH325BA Blade Holder 14-Degree for B5300, Bronze Accent

  • This item has For use with B5300WA, B6000 series and B6030 series blade sets.
  • This item has 14 degree blade holder for use with DC motor fans, The Islander, Louvre, and Sandella.
  • Blades and blade holders are sold separately in sets of five.
  • This item has 14 degree blade holder for use with DC motor fans, The Islander, Louvre and Candela.
Check Stock

Simple Combination Mini Quick Change Tool Post Kit Set For CNC Table/Hobby Lathe Aluminium Material

  • Fits 7x10, 7x12 and 7x14 mini lathes, ACCEPT - Turning Holder: 1/4-3/8" Shank.
  • Using the dial, each tool holder can be rotated multiple angle of 9 ° or 9 °, operations with extension units,can be processed various angles work piece..
  • Mounting hardware include 2x mounting bolts (M8 & M10) 2x Allen Key.
  • Holder include: Two turning tool holders, a boring tool holder, a cut-off blade holder..
Check Stock

MUYI 2 Set Mini Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 15A ATM Fuses

  • Material:copper+rubber, Fuse holder dimension:38x25x13mm.
  • In-line fuse holder for mini blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A, ideal for car truck atv boat.
  • 14 AWG thick red pigtail wire allow you to cut and splice it into any project, Wire length:30cm/12inches, Wire range:14 AWG.
  • Waterproof design, the rubber cap fits on tightly to protect any mini blade fuse inside.NOT easy to fall off or let water in..
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 15A Mini Blade Fuse.
Check Stock

Tascam WS-11 Windscreen for DR-Series Handheld Recorders

  • Ws-11 windscreen uses artificial fur to block even the highest wind gusts from the internal mics of Tascam recorders.
  • Tascam WS-11 windscreen compatibility: DR-1, GT-R1, DR-2d, DR-05, DR-07, DR-07MKII, DR-22WL, DR-40, DR-100, DR-100MKII. Not compatible with DR-08.
  • The windscreen works in both XY and AB position.
Check Stock

10ga Fuse Holder 2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse Holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses

  • 10 AWG thick red pigtail wire allow you to splice it into any project..
  • Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine.
  • Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.
Check Stock